Maytag Washer Legs and Feet

Videos!

Your Price

$7.45

Maytag Washer Foot, Front - Single

★★★★★

4 Reviews

PartSelect Number PS11747965

Manufacturer Part Number WPW10001130

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.

Installation Instructions

Paddy from Ferndale, WA

Bearings went out in the drum.

purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...

Videos!

Your Price

$15.28

Maytag Washer Rubber Foot Pad

★★★★★

1 Review

PartSelect Number PS11738859

Manufacturer Part Number WP210684

The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Many of our customers have rated this repair as very easy. To complete the repair, turn the old leg counter clockwise to remove it. Then, simply remove the old pad and replace it with the new one. Finally, re-attach the leg by turning clockwise. Ensure that the washer is level, and adjust the leg accordingly if it is not.

Installation Instructions

Paddy from Ferndale, WA

Bearings went out in the drum.

purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...

Videos!

Your Price

$20.75

Maytag Washer Rear Leveling Foot

★★★★★

1 Review

PartSelect Number PS334463

Manufacturer Part Number 285244

Sold Individually. Used to help stabilize the appliance on uneven surfaces.

Videos!

Your Price

$18.47

Maytag Washer Adjustable Leveling Leg

★★★★★

1 Review

PartSelect Number PS2021026

Manufacturer Part Number 22003428

If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Your washer should be kept as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This genuine OEM replacement part is sold individually, so be sure to order the amount you need.

Installation Instructions

Rebecca from Wylie, TX

Stripped leveler screw making impossible to level my washer

Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy. Read more...

Videos!

Your Price

$11.21

Maytag Washer Leveling Leg with Foot

PartSelect Number PS11738005

Manufacturer Part Number W10862938

Sold individually.

Your Price

$20.00

Maytag Washer Leveling Foot & Nut

PartSelect Number PS11746502

Manufacturer Part Number WP8563585

This individual levelling foot is compatible with different types of standing home appliances and is a genuine OEM part. Made of high-quality metal and featuring a metal securing nut, this levelling foot is made of plastic and is used to level the pedestal for your appliance. Over time and through gradual wear and tear of moving your appliance around or through excessive movement and impact, a levelling leg will crack and break, and eventually destabilize itself. If you find your appliance is imbalanced or vibrates excessively when in use, this levelling foot may need to be replaced. Since most appliances take one foot on each corner, 4 corners being 4 feet, it is important to consider the amount of feet you require when ordering. This levelling foot is adjustable, since it comes with the securing nut, adding longevity to the levelling foot and your appliance. To replace this foot, simply lift the corner of the pedestal from the floor, unscrew and remove the previous foot, and install the new foot, adjusting its height with the nut.

Installation Instructions

Linda from Arcadia, IN

missing parts on used washer and dryer pedstals

screwed on

hard to find parts - order on Thurs evening and got Sat - made problem really easy Read more...

Videos!

Your Price

$8.36

Maytag Washer Leveling Leg

PartSelect Number PS10062745

Manufacturer Part Number W10739673

Sold individually.

Installation Instructions

Oralia from DALLAS, TX

washer shaking

the repair went well but I still haven't received a refund for the order was was sent incorrectly. Order #22085769 order date 2/3/23 Read more...

Videos!

Your Price

$11.06

Maytag Washer FEET-LVLNG

PartSelect Number PS11750878

Manufacturer Part Number WPW10240448

Your Price

$17.96

Maytag Washer Single Motor Grommet

★★★★★

1 Review

PartSelect Number PS11743304

Manufacturer Part Number WP62691

Sold Individually.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Robert from Friendswood, TX

Spider coupling between motor and transmission broken

Followed the video on the website. I removed the hoses from the pump rather than removing the pump as suggested in the video. Then separated the motor from the transmission and replaced the coupling; then reattached the motor and hoses. Lining up the washer cover and clamping it back on was the most trouble. But all in all, a easy repair. Read more...