Maytag Washer Brackets and Flanges

Your Price

$21.95

Maytag Washer Mounting Plate

★★★★★

7 Reviews

PartSelect Number PS12074431

Manufacturer Part Number W11025649

This mounting plate is sourced directly from the original manufacturer for use with microwaves. It is a metal plate designed to support a microwave by attaching the microwave to the wall studs. If the mounting plate wears down or becomes damaged, it will cause the microwave to tilt and become unstable, potentially damaging the appliance and the wall it is attached to. Therefore, it is important to replace the plate promptly. First disconnect the microwave from the power source and locate the fasteners that hold the mounting plate. Detach the old plate and align the new one with the existing mounting holes. Secure the plate and check that the microwave is stable and unmoving.

Installation Instructions

rebecca from LA CANADA FLT, CA

Demo stove exhaust fan and tile backsplash, install over range microwave, rotate exhaust fan and adjust exhaust plenum.

Whirlpool Microwave was purchased as used item, so installation in a new location required purchase of mounting template, wall bracket, mounting hardware. Granite backsplash cut out using wet/dry diamond blade and Ryobi 6.5 inch saw. Microwave exhaust fan removed and rotated for upward exhaust using modified exhaust plenum from existing stove exhaust hood. Installation of Microwave was the simplest part of the job. All mounting materials worked as required. A list of the materials provided in the hardware mount kit would be helpful, I would not have had to order the top mount screws separately if it was clear that they were included in the kit. Otherwise, no complaints. Read more...

Your Price

$63.65

Maytag Washer Stack Kit

★★★★★

1 Review

PartSelect Number PS12069913

Manufacturer Part Number W10869845

Explore the convenience of saving space in your laundry room with the Whirlpool long vent dryer stack kit. Specifically designed to fit a selection of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef washer and dryer models, this is a genuine OEM part aimed at providing efficient, long-lasting performance. The stack kit is also compatible with hybrid dryers, broadening its use. It comes equipped with all necessary hardware and a comprehensive set of instructions to help you stack your dryer on your washer with ease. This product is found in the category of Whirlpool Dryer Parts on our website. Before placing your order, we recommend verifying the compatibility of the kit with your specific washer/dryer model, as size and shape variations may exist.

Installation Instructions

Nelson from Middletown, NY

Washer Would Drain But Not Spin

Removed rear cover (6 screws) unpluged harness from motor control and removed same. Replaced motor control reinstalled harness. Replaced rear cover. Parts used motor control board. Read more...

Videos!

Your Price

$10.42

Maytag Washer Spring Outer Bracket

★★★★★

1 Review

PartSelect Number PS11743348

Manufacturer Part Number WP64067

Sold individually.

Installation Instructions

Edward from Easthampton, MA

unbalanced load...knocking sound.

Unbalanced load was creating a knocking sound (as if the clothes load was unbalanced). Dismantled the washer to find that one brackets had rusted out. [FYI: 3 bracket at 120 degree apart (for the 360 degree circle)]. I found that the hole (on the bracket) where the spring holds was gone. Purchased parts. Replaced them (spring, bracket, screw). Reassembled washer then ran wash for a cycle. Successful fix. Read more...

Videos!

Your Price

$9.92

Maytag Washer Injector Sleeve Bracket - Side Mounting

★★★★★

1 Review

PartSelect Number PS11739774

Manufacturer Part Number WP22213057

This injector sleeve bracket is white and made entirely of plastic. This is a side mounting style bracket.

Fixes these symptoms

Leaking
See more...

Installation Instructions

Richard from Ashley Falls, MA

washer was leaking onto the floor

First I disconnected the power and turned off the water supply. Then removed the front panel of the washer by removing the two phillips head screws from the lower left and right front of the machine. I then removed the four hex screws at the corners of the top of the machine using a socket set. The two screws in the front of the top come out through the inside and the two screws in the back come out through the access holes in the top. Next I disconnected the bleach/softener tube from the upper end to allow the lid to be raised. Then I swung the right hand side of the lid up fully and rested it on the left hand side support using the braces provided on the lid and resting the weight on the attached support string. The injector valve, inector nozzle and injector bracket are right on top on the left hand side. The bracket is taken out by removing one hex screw on the underside of the bracket. The valve and nozzle are removed by loosening the hex screw on the hose clamp, To replace, first assemble the rubber sleeve and plastic injector. The large end of the plastic injector should fit squarely into the slot of the rubber sleeve. To insert this assembly back into the molded end of the injector hose I used a small amout of laundry detergent to lubricate the large end of the rubber sleeve. This allowed the part to slide in without displacing the rubber sleeve from the plastic injector nozzle. Now, I replaced the associated parts (lid and front panel) and turned the water on and plugged the washer back in. No more leak. Thanks to PartSelect.com my repair was easy. I did not need to replace the injector sleeve bracket but purchased the new one in case I broke the old one during the repair. Read more...

Your Price

$40.95

Maytag Washer Stacking Kit

★★★★★

2 Reviews

PartSelect Number PS990537

Manufacturer Part Number 8572546

This kit allows you to stack your washer and dryer to maximize your laundry space.

Your Price

$17.90

Maytag Washer Support Rear Panel

PartSelect Number PS11746006

Manufacturer Part Number WP8519200

Your Price

$16.90

Maytag Washer Bracket

PartSelect Number PS11728018

Manufacturer Part Number W10839743

Your Price

$44.97

Maytag Washer Stacking Kit

★★★★★

6 Reviews

PartSelect Number PS888067

Manufacturer Part Number 8541503

This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.

Installation Instructions

Randy from Brentwood, CA

Placing Dryer on Top of Washing Machine with Stack Kit

I purchased a stack kit from "Part select.com". The item was just what I needed to do the job. The delivery of the part was made the next morning. WOW! Excellent service! The process was completed in less than 24 hours, start to finish. Very impressed! Read more...