Kenmore Refrigerator Wheels and Rollers
Find your part
Enter your model number or a part number and click "Search"
Popular Kenmore Refrigerator Wheels and Rollers
Your Price
$22.80
In Stock
ROLLER
PartSelect Number PS12071116
Manufacturer Part Number 5304508016
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
hellen from SPRINGFIELD, MO
Roller screw recipients broke out. Can't be repaired.
Was not able to repair. Wasn't rollers I needed. Plastic screw recipients in front on frame had broken out so rollers weren't the problem. Tried gluing back pieces to no avail. Crisper frames are poorly designed.
Read more...
Your Price
$41.37
In Stock
Ice Auger Motor Shaft
PartSelect Number PS11739142
Manufacturer Part Number WP2188917
This part is the drive shaft for the auger.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- See more...
Installation Instructions
terry from panama city beach, FL
Your Price
$53.03
In Stock
Single Roller - Left Front
The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.
To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet. Read more...
PartSelect Number PS11755876
Manufacturer Part Number WPW10515763
Sold individually.
Installation Instructions
Daniel from BOCA RATON, FL
Original bracket foot brake screw hole was stripped and foot brake would not extend
The repair seemed simple, I just needed to remove the old bracket -- 4 screws -- and slip the new one on.The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.
To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet. Read more...
Your Price
$53.19
In Stock
Single Roller - Right Front
PartSelect Number PS11755875
Manufacturer Part Number WPW10515762
Sold individually.
Your Price
$9.52
In Stock
Single Roller
Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
PartSelect Number PS11738235
Manufacturer Part Number WP10450603
This wheel is sold individually. It is located on the bottom of the refrigerator.
Installation Instructions
mike from holly springs, NC
Left front plastic wheel was broken
Pop loose the plastic grate at the bottom.Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
Your Price
$11.04
In Stock
Your Price
$33.67
In Stock
Front Roller
PartSelect Number PS11738962
Manufacturer Part Number WP2166108
Sold individually. Hardware not included. Roller only.
Installation Instructions
Tony from Chicago, IL
Right front wheel broke
Definatly a two man job. I suggest you put a pad down to protect your floor. Remove the filter, grill, and bolts per instructions. Everything is straight forward. Move the frame back 1/2 to 1 inch then tilt the frig back on it's side about 4 inches. If the frame doesn't drop down, move it back until the front of the frame comes of the front lip of the frig. Place a block under the frig lip NOT the frame and WATCH YOUR FINGERS. The wheel should be hanging down. Just pull out the pin, replace the wheel (make sure you have it facing the correct way) and tilt back and pull the blocks. Move the frig back in place and replace the bolts. Took me and a buddy less than 30 minutes.
Read more...
Your Price
$26.93
In Stock
Crisper Drawer Roller
PartSelect Number PS7321350
Manufacturer Part Number 242236801
Sold individually.
Your Price
$28.74
In Stock
ROLLER-CAB
PartSelect Number PS11755335
Manufacturer Part Number WPW10475495
Sold individually.
Installation Instructions
Hans from OGDEN, UT
Raise side of fridge and slide 2x4 under side with broken wheel.
Remove back side cardboard access cover. About 6 dcrews need to be removed. Remove 9/16” bolt and lower compressor tray frame down to slide out wheel axel. Place wheel in slot and replace axel. Lift compressor tray and replace 9/16” bolt. Replace cardboard cover. Remove 2x4.
Read more...
Your Price
$17.72
In Stock
Drawer Wheel Support
PartSelect Number PS2350567
Manufacturer Part Number 241770301
Fixes these symptoms
- Door won’t open or close
- See more...
Related Parts
- All Kenmore Refrigerator parts
- Kenmore Refrigerator Brackets and Flanges
- Kenmore Refrigerator Caps and Lids
- Kenmore Refrigerator Circuit Boards and Touch Pads
- Kenmore Refrigerator Compressors
- Kenmore Refrigerator Deflectors and Chutes
- Kenmore Refrigerator Dispensers
- Kenmore Refrigerator Door Shelves
- Kenmore Refrigerator Doors
- Kenmore Refrigerator Drawers and Glides
- Kenmore Refrigerator Drip Bowls
- Kenmore Refrigerator Ducts and Vents
- Kenmore Refrigerator Electronics
- Kenmore Refrigerator Elements and Burners
- Kenmore Refrigerator Fans and Blowers
- Kenmore Refrigerator Filters
- Kenmore Refrigerator Grates
- Kenmore Refrigerator Grilles and Kickplates
- Kenmore Refrigerator Handles
- Kenmore Refrigerator Hardware
- Kenmore Refrigerator Hinges
- Kenmore Refrigerator Hoses and Tubes
- Kenmore Refrigerator Ice Makers
- Kenmore Refrigerator Insulations
- Kenmore Refrigerator Knobs
- Kenmore Refrigerator Latches
- Kenmore Refrigerator Lights and Bulbs
- Kenmore Refrigerator Motors
- Kenmore Refrigerator Panels
- Kenmore Refrigerator Power Cords
- Kenmore Refrigerator Seals and Gaskets
- Kenmore Refrigerator Sensors
- Kenmore Refrigerator Springs and Shock Absorbers
- Kenmore Refrigerator Switches
- Kenmore Refrigerator Tanks and Containers
- Kenmore Refrigerator Thermostats
- Kenmore Refrigerator Timers
- Kenmore Refrigerator Trays and Shelves
- Kenmore Refrigerator Trims
- Kenmore Refrigerator Valves
- Kenmore Refrigerator Wire Plugs and Connectors
