EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Kenmore Refrigerator Starters

Popular Kenmore Refrigerator Starters

When a compressor cannot start, the refrigerator may hum, click, run only briefly, or remain too warm. A start relay with a heat-sensitive resistor controls current to the compressors starting circuit. The assembly may need replacement if its housing is cracked, scorched, loose, or rattles from broken material inside. These signs are helpful, but electrical tests and the appliance service information should guide the diagnosis. Verify the exact model before ordering because terminal layouts can vary. Disconnect power, allow the compressor area to cool, and discharge any capacitor if equipped and directed. Do not bend the compressor pins, and reinstall the protective cover before operation.
When a compressor cannot start, the refrigerator may hum, click, run only briefly, or remain too warm. A start relay with a heat-sensitive resistor controls current to the compressors starting circuit. The assembly may need replacement if its housing is cracked, scorched, loose, or rattles from broken material inside. These signs are helpful, but electrical tests and the appliance service information should guide the diagnosis. Verify the exact model before ordering because terminal layouts can vary. Disconnect power, allow the compressor area to cool, and discharge any capacitor if equipped and directed. Do not bend the compressor pins, and reinstall the protective cover before operation.
What this part fixes:
  • Clicking sound
  • Fridge and Freezer are too warm
  • Fridge too warm
This refrigerator compressor start device helps initiate the cooling cycle by providing the electrical boost needed to start the compressor motor. Once the compressor is running, it automatically disconnects the start circuit to prevent overheating and includes overload protection that shuts off power if excessive heat or current is detected. This component is rated for 127 volts and 5 watts and features a three-terminal configuration. Replacing a faulty start device can help resolve issues such as the refrigerator not cooling properly, repeated clicking noises, or a compressor that fails to start or runs intermittently.
This refrigerator compressor start device helps initiate the cooling cycle by providing the electrical boost needed to start the compressor motor. Once the compressor is running, it automatically disconnects the start circuit to prevent overheating and includes overload protection that shuts off power if excessive heat or current is detected. This component is rated for 127 volts and 5 watts and features a three-terminal configuration. Replacing a faulty start device can help resolve issues such as the refrigerator not cooling properly, repeated clicking noises, or a compressor that fails to start or runs intermittently.
Installation Instructions
Bruce from TEMPLE HILLS, MD
Warm fridge and freezer
After checking the capacitor and 3 in 1 starter run relay for continuity and both measuring , I was able to remove the old parts and install the new parts for the refrigerator after unplugging the unit. I also checked the new parts prior to installing. I also went on Parts Select and watched some very helpful videos. Thanks a lot for your help desk for going above and beyond to ensure that I ordered the correct part! ????
$60.48
In Stock
Ensure reliable compressor startup with this compressor start relay, designed to deliver the initial electrical boost needed to get the cooling system running. Once engaged, it helps regulate power to maintain efficient compressor operation and consistent cooling performance. Built for dependable use, this component supports proper appliance function and can help resolve issues such as startup failure, warming temperatures, or repeated clicking noises.
Ensure reliable compressor startup with this compressor start relay, designed to deliver the initial electrical boost needed to get the cooling system running. Once engaged, it helps regulate power to maintain efficient compressor operation and consistent cooling performance. Built for dependable use, this component supports proper appliance function and can help resolve issues such as startup failure, warming temperatures, or repeated clicking noises.
What this part fixes:
  • Will Not Start
$65.85
In Stock
This refrigerator compressor start relay is a small but essential component that helps start the compressor by providing the initial electrical boost it needs to run. Once the compressor is operating, the relay shuts off the start function to maintain normal cooling. It’s a common replacement for issues such as a refrigerator not cooling, clicking noises from the back of the unit, or a compressor that struggles to start. Designed for standard household electrical systems, it offers a simple, accessible repair option to restore proper cooling performance.
This refrigerator compressor start relay is a small but essential component that helps start the compressor by providing the initial electrical boost it needs to run. Once the compressor is operating, the relay shuts off the start function to maintain normal cooling. It’s a common replacement for issues such as a refrigerator not cooling, clicking noises from the back of the unit, or a compressor that struggles to start. Designed for standard household electrical systems, it offers a simple, accessible repair option to restore proper cooling performance.
$78.05
Special Order
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

$63.60
Special Order
$68.10
On Order
$76.78
Special Order
Installation Instructions
ELAINA from QUEENS VILLAGE, NY
Fridgerator shorted out. Smoke coming from back.
There was an accidental spill which seeped through the water-hose feed hole in the bottom of the fridge. The liquid had dripped down onto the Starter and Run Capacitor and shorted them out. I called an applicance repair shop to possibly get it fixed. They estimated around $500 with the service call, parts and labor. Not a chance was they getting that from me. So I unhooked the retaining wired and removed the burnt parts. I then looked up the part numbers and ordered the 2 parts I needed from Parts Select for $50 bucks including shipping. In just two days my order arrived. I installed the 2 parts the same way and as easily as I took them out. Now my fridge is running good as new. When my HUSBAND returned home from work he was stunned to see that I had done the repair without his help. He laughed and said, "Yep. You da' woman!"

Mrs. S.
Queens, NY
$88.88
Special Order

More Kenmore Refrigerator Parts

People often need to fix these common parts