Kenmore Refrigerator Parts

Kenmore Appliance Parts

Popular Kenmore Refrigerator Parts

Your Price
$103.96
   In Stock
Kenmore Refrigerator Ice and Water Filter
★★★★★
★★★★★
101 Reviews
PartSelect Number PS11701542
Manufacturer Part Number EDR1RXD1
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, the filter is in the bottom left grille. In top-freezer units, the filter is located in the middle of the refrigerator. This NSF certified filter reduces 28 contaminants including pharmaceuticals, metals, minerals, pesticides, cysts, industrial chemicals, Class I Particulates and chlorine. It is made up of coconut carbon block and has three layers of filtration. The first layer is particle filtration that helps block larger contaminants. The second layer is micro-filtration, which prevents medium-sized impurities from passing. The third layer is called absorption filtration, which absorbs microscopic-sized pollutants. It measures 2 inches deep, 2 inches wide, 1-1/2 inches high, and weighs 0.5 lbs. To ensure your filter is working its best, it needs to be replaced every six months. This single filter has a simple, quick-turn installation feature that does not require any tools.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
James from Phelan, CA
Old filter and water line to cold water line
Cut a 1/4 inch off both lines and connect. Changed water filter. Found the water filter at Home Depot for 1/2 The price. Look befor you buy. Read more...
Your Price
$36.21
   In Stock
Kenmore Refrigerator Door Shelf Bin
★★★★★
★★★★★
302 Reviews
PartSelect Number PS11752778
Manufacturer Part Number WPW10321304
This manufacturer-certified Refrigerator Door Shelf Bin, also known as the crisper bin and door shelf bin, is made of clear plastic, and is easy to install. It is used to hold items in the fridge door, like jars, bottles, cans, and condiments, and this item is clear with white trim around its top edge and you'll be able to visually see if the part is broken. This particular shelf attaches to the fridge door. You can check if this model is right for your appliance by checking your user manual and model number. This individually-sold door bin fits many different models of side-by-side refrigerator, and can be installed with the use of no tools.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • Leaking
  • See more...
Installation Instructions
JULIA from BRONX, NEW YORK, NY
replacing parts only
the prices you had were great, now I see there was an increase in the parts.
thank you
Read more...
Your Price
$41.43
   In Stock
Kenmore Refrigerator Door Shelf Retainer Bar
★★★★★
★★★★★
166 Reviews
PartSelect Number PS734935
Manufacturer Part Number 240534901
This door shelf retaining bar, also known as refrigerator door bar retainer or fridge door rack, is a genuine part sourced from the original manufacturer. It is a white This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refrigerator or freezer door to hold items on the door shelves. It holds items in your fridge and will show physical damage if broken or warped, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. No tools are required for this installation, the part should simply snap into place. This part measures roughly 25 inches wide, 3 inches high, and 5 inches deep. This part is sold individually, and we recommend checking the other door shelf retaining bars on your refrigerator or freezer at the same time as ordering this part to ensure that no others need to be replaced, as they often wear or warp at similar speeds.
Fixes these symptoms
Installation Instructions
Cynthia from Long Beach, CA
The retainer door shelf broke 3 years ago
I just snapped the new shelves in place and !voila! I should've done this years ago. Read more...
Your Price
$37.71
   In Stock
Kenmore Refrigerator Door Shelf Bin - White
★★★★★
★★★★★
233 Reviews
PartSelect Number PS11739091
Manufacturer Part Number WP2187172
This refrigerator door shelf bin, also known as the door bin, or sometimes just a "bucket", is an authentic manufacturer-certified part made of white plastic and is easy to install. It is used to hold items in the fridge door, like jars, cans, and bottles, and you'll be able to visually see if the part is broken or warped. This particular shelf attaches directly to the fridge door; you should be able to pull out the old bin and snap the new one into place by observing the slots and pushing the bin down into them. You can check if this model is right for your appliance by checking your user manual and model number. The door bin measures about 18 inches wide, 4.5 inches high, by 7 inches deep. This door shelf bin is sold individually, so if your refrigerator takes multiple bins, which many do, you will need to order the appropriate amount of bins.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker not making ice
  • Leaking
  • See more...
Installation Instructions
Charles from Dallas, TX
One of my door bins and filter cap broke.
I searched the model number for my Whirlpool refrigerator on the internet and partselect.com came up so I clicked on it. The site asked for my model number which I typed in and there it was...a picture of my refrigerator in full detail and very well diagramed and labeled. I found the number of the parts I needed, added them to my cart and paid. In a few days (2 I think which is an awsome delivery time) the parts were iin my front door step, very well packaged and in imaculate condition. I took them out of the box and installed them in less than 15 minutes. A parts internet order and repair has NEVER gone as quick and easy as this did. Thankyou Partselect for an awsome job and awsome website and even more awsome delivery time. Very happy and impressed with your service. Keep up the outstanding work!!!!!! Read more...
Your Price
$103.96
   In Stock
Kenmore Refrigerator Water Filter
★★★★★
★★★★★
94 Reviews
PartSelect Number PS11722130
Manufacturer Part Number EDR4RXD1
This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...
Installation Instructions
Douglas from Byron, NY
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. Read more...
Your Price
$79.63
   In Stock
Kenmore Refrigerator Crisper Drawer with Humidity Control
★★★★★
★★★★★
404 Reviews
PartSelect Number PS11739119
Manufacturer Part Number WP2188656
The crisper drawer (Crisper Pan, Refrigerator Crisper Drawer) with humidity control is meant to keep your vegetables and fruit as fresh as possible by allowing you to regulate the humidity levels within the drawer. It attaches on the inside of your refrigerator to the bottom of the crisper shelf. This drawer can break from misuse or accidental damage. It is also subject to material fatigue over time. If broken or damaged, it may be difficult to slide the drawer in and out, and it should be replaced. This plastic drawer measures 14.92 inches long, 7.6 inches high, and 16.5 inches wide and comes in white/clear.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
Installation Instructions
JULIA from BRONX, NEW YORK, NY
replacing parts only
the prices you had were great, now I see there was an increase in the parts.
thank you
Read more...
Your Price
$83.89
   In Stock
Kenmore Refrigerator Whirlpool EveryDrop3 Water Filter
★★★★★
★★★★★
111 Reviews
PartSelect Number PS11722128
Manufacturer Part Number EDR3RXD1
This EveryDrop Filter3 is certified to reduce the most contaminants with Triple Filtration Technology. Now, you and your family can enjoy the enriching benefits of cleaner, freshly filtered ice & water. Not just in beverages, but for preparing meals, too. This advanced generation of ice and water refrigerator filters from EveryDrop Filters are certified to reduce more contaminants with Triple Filtration Technology. Filter 5 reduces 16 contaminants, so you can feel reassured that you and your family are getting the most out of your water. Remember to replace your refrigerator filter every 6 months to maximize contaminant reduction.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Kate from Jacksonville, FL
there were directions
We didn't know where the product went and it was very difficult to install. Read more...
Your Price
$11.88
   In Stock
Kenmore Refrigerator Crisper Cover Support - Front
★★★★★
★★★★★
78 Reviews
PartSelect Number PS2358880
Manufacturer Part Number 241993101
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Fixes these symptoms
Installation Instructions
Peter from Amherst, NY
Support studs were broken
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. Read more...
Your Price
$65.65
   In Stock
Kenmore Refrigerator Crisper Drawer With Handle
★★★★★
★★★★★
118 Reviews
PartSelect Number PS11739122
Manufacturer Part Number WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
Fixes these symptoms
Installation Instructions
Betty from Orinda, CA
Previous owners of the condo took the two drawers from the refrigerator
No repair, just slid the drawers in their places.
Since you had a diagram of the refrigerator parts, ordering the parts was easy and I was confident that the parts were the correct ones.
Read more...
Your Price
$27.51
   In Stock
Kenmore Refrigerator Center Rail
★★★★★
★★★★★
223 Reviews
PartSelect Number PS11752912
Manufacturer Part Number WPW10326469
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Refer to your model number and user manual to see if this part will be right for your appliance. This part is a very easy repair which only takes a few minutes and does not require any tools. Just slide the crisper drawers out, lift out the glass shelf, slide the new rale into place and replace the glass shelf and crisper drawers. This part is sold individually and not as part of a set.
Fixes these symptoms
Installation Instructions
Robert from Meriden, CT
Crisper frame center rail failure
Remove Crisper drawers from Bottom Shelf.
Remove glass from the top of Bottom Shelf.
Drop new Crisper frame center rail into slots on the top of the Bottom Shelf shelf.
Replace glass onto the top of the Bottom Shelf.
Slide drawers between left and right guides and the Crisper frame center rail.

Total repair time less than one minute.
No tools required.
Read more...

Kenmore Refrigerator Appliance Types

Related Kenmore Refrigerator Parts

Popular Kenmore Refrigerator Models

Below are the most popular Kenmore Refrigerator models we have. Enter your model number in the search box to find your model.

Kenmore Appliance Parts

Genuine OEM Kenmore Refrigerator Parts

Kenmore refrigerators are popular for their ample storage space and advanced features such as the Genius Cool feature, which keeps food fresh by automatically adjusting the temperatures inside the refrigerator as needed. However, over time, it is normal for parts to wear down or for accidents to happen that may damage the appliance. Whether you are dealing with a broken door bin, a faulty thermostat, or need a new water filter, we have you covered.

PartSelect has been selling genuine parts online for over 25 years and our history in the appliance business dates back almost 80 years. We provide only OEM replacement parts to ensure that each part is compatible with your appliance and is designed to the same standards as the original. Take advantage of our model search feature to quickly find the correct part for your Kenmore fridge.

  • Fit
  • Quality
  • Warranty
Kenmore Appliance Parts

Simple DIY Kenmore Refrigerator Troubleshooting

Kenmore refrigerators are reliable, but when issues spring up we will walk you through how to diagnose and fix them. Most refrigerator fixes are quite simple, you can troubleshoot them yourself. Below we walk you through common issues and the parts that solve them.

Noisy Kenmore Refrigerator – It is not uncommon for a refrigerator to be noisy, but if you notice a new or increasing sound you might want to inspect the issue further. Have you heard buzzing, humming, clicking, and knocking noises coming from your Kenmore refrigerator? You first need to figure out where on the appliance the sound is coming from. There are many moving parts in your Kenmore appliance, such as the condenser fan motor and evaporator fan motor, and friction and wear over time might lead to the noises. Some specific noises have clear fixes, for example, a scraping sound is caused by one of the internal fans brushing up against something as it spins. If you hear rattling you need to make sure that your Kenmore fridge is level, and the drain pan is secure. Your Kenmore fridge is always going to make some amount of noise, and a mild humming noise is normal, but if you notice an increased humming sound, the compressor might be overworked.

Leaking Kenmore Refrigerator – A leak is not an indication of a major problem with your Kenmore fridge, most often it is a simple fix. You are going to first want to figure out where the water is pooling and look for any indicators that point to the source. For instance, is there condensation inside the fridge? Is there ice build-up that could be melting? Do you have an icemaker that has a water line? You are then going to want to inspect your door gaskets and seals. If the door is not completely sealed it will not only lead to condensation, but it will also overwork your fridge and lead to bigger issues. If you have ruled that out you should also check water inlet valves, water lines, and the icemaker.

Kenmore Refrigerator Will Not Run – It might be worrying when you notice that your Kenmore Fridge is not running, but often there can be a simple fix. If the fridge is not running, you will want to troubleshoot things before the temperature starts rising too much. There are a few parts that work together to monitor the internal temperature of your Kenmore fridge and communicate with the control board. You will want to check these parts. We recommend you look at the start capacitor, overload, temperature control, and control board. If the issue is not sensing temperature, or communication of the temperature, it could be an issue with the compressor itself.

Kenmore Icemaker Not Making Ice – If you notice that the icemaker in your Kenmore fridge is not making ice the first thing you should do is check the bail arm in the ice bin. When the bail arm is engaged the icemaker will not make ice because it thinks the bin is full, so a quick check to make sure it is not stuck before beginning the troubleshooting process is wise. If you have ruled that out it is most likely there is an issue with the water supply, if the icemaker is getting no water or not enough water ice will not be made. To check the water supply you will want to inspect the water line, water inlet valve, and the water filter.

Kenmore Refrigerator Too Warm – The primary job of your refrigerator is to keep things cool, but if your Kenmore fridge is not cooling properly, it could be a simple fix. Before you start troubleshooting and inspecting parts you should ensure your fridge is stocked properly. If that is not the issue you should then look at the air circulation. You need to confirm the air damper or baffle is undamaged and unblocked; that is how cool air gets into your fridge. If you have ruled that out you will then want to look at the evaporator fan, condenser fan, and the temperature sensor.

Related Kenmore Refrigerator Articles