My Orders
Kenmore Refrigerator Handles
GET YOUR OFFICIAL Kenmore PARTS TO ENSURE VICTORY
Popular Kenmore Refrigerator Handles
This white refrigerator door handle is a genuine OEM replacement designed for use on both the freezer and fresh food doors of select models. Constructed for durability and a secure fit, this handle restores functionality and appearance to your appliance. Installation is straightforward and requires only a Phillips screwdriver. To replace, remove the two screws from the top of the door, slide out the old handle, attach the mounting block to the new handle, and secure it in place. Always verify model compatibility before purchase.
This white refrigerator door handle is a genuine OEM replacement designed for use on both the freezer and fresh food doors of select models. Constructed for durability and a secure fit, this handle restores functionality and appearance to your appliance. Installation is straightforward and requires only a Phillips screwdriver. To replace, remove the two screws from the top of the door, slide out the old handle, attach the mounting block to the new handle, and secure it in place. Always verify model compatibility before purchase.
Installation Instructions
Lisa from Linton, ND
Door handle broke off
First I removed the top screws, then I slide it off the lower screw that is hidden behind the handle. I replaced the handle by sliding it onto the bottem first then attaching it onto the top with the two top screws.
The screws and trims are NOT included with this handle.
The screws and trims are NOT included with this handle.
Installation Instructions
Kimberly from Edmon ton, KY
I broke the door handle off while moving.
Partselect made it easy and affordable to replace the part myself. It arrived on the 3rd day after ordering. Thanks
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle support also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle support also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
This is a door handle for your refrigerator or freezer, which allows you to easily open and close the door. Take note that the screws are not included when you order this part; you will need to keep the screws from your old handle when making this repair. You are going to need a Phillips screwdriver and either a flat-blade screwdriver or a putty knife for this repair. This handle is white and is nine inches long by almost four inches wide.
This is a door handle for your refrigerator or freezer, which allows you to easily open and close the door. Take note that the screws are not included when you order this part; you will need to keep the screws from your old handle when making this repair. You are going to need a Phillips screwdriver and either a flat-blade screwdriver or a putty knife for this repair. This handle is white and is nine inches long by almost four inches wide.
Installation Instructions
David from Vineyard Haven, MA
freezer door handle started to crack at one end
I removed two screws and the old handle. I installed the new handle with the two screws.
Sold individually.
Sold individually.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my v
... Read more
arious appliance parts from you
Respectfully
Roy
Respectfully
Roy
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Handle only.
Handle only.
Installation Instructions
Debbie from Eagle, CO
door handle broke off
It would have been nice to know that screws were not included and/or show were screws could be purchased. Thank goodness I was able to reuse the top 2 and had an extra screw in my tool bag that fit the bottom, because the existing screw had been super glued into bottom part of handle.
One Handle only.
One Handle only.
Installation Instructions
Anita from ORLAND PARK, IL
Top part of door handle split off of the section screwed to the door.
Took off the old handle with Phillips screwdriver on top 2 screws and Allen wrench for the bottom set screw.
Save the 2 old top screws, as they are needed on replacement handle.
Placed new handle in position and used same tools on same screws to attach to door.
Save the 2 old top screws, as they are needed on replacement handle.
Placed new handle in position and used same tools on same screws to attach to door.
This product is a genuine OEM Stainless Steel Handle specifically designed for your Whirlpool appliance. Offering high-quality, durability, and resilience, this product ensures that your appliance remains in optimal working condition. Please bear in mind that while parts may share similarities in appearance, every model requires exact specifications to function correctly. This handle is a perfect fit for Whirlpool models, a name synonymous with dependability and innovation. To ensure maximum compatibility and performance, please verify the part number with your model before placing the order online. Enjoy an effortless and satisfying user experience with this Stainless Steel Handle from Whirlpool.
This product is a genuine OEM Stainless Steel Handle specifically designed for your Whirlpool appliance. Offering high-quality, durability, and resilience, this product ensures that your appliance remains in optimal working condition. Please bear in mind that while parts may share similarities in appearance, every model requires exact specifications to function correctly. This handle is a perfect fit for Whirlpool models, a name synonymous with dependability and innovation. To ensure maximum compatibility and performance, please verify the part number with your model before placing the order online. Enjoy an effortless and satisfying user experience with this Stainless Steel Handle from Whirlpool.
This is just the handle. Must order screws separately.
This is just the handle. Must order screws separately.
Installation Instructions
Deborah from Coronado, CA
Handle broke off
First I removed the upper handle part (slides up and off), and repeated with the lower handle component (slides down and off).
The middle handle section was easily removed with a screwdriver. I replaced it with the new one and slid on the upper and lower parts.
The middle handle section was easily removed with a screwdriver. I replaced it with the new one and slid on the upper and lower parts.