Kenmore Refrigerator Drip Bowls
Find your partEnter your model number or a part number and click "Search"
Take a photo of your product’s model number plate and upload it to find parts fast!
Here is an example model number plate:
Popular Kenmore Refrigerator Drip Bowls
Evaporator Drip Tray
PartSelect Number PS11756735
Manufacturer Part Number WPW10614158This is the replacement evaporator drip tray for your refrigerator. It is made of white plastic and is approximately 19 inches by 9 inches. The evaporator drip tray sits below the evaporator to collect dripping water. If the drip tray is damaged, you may notice that your refrigerator is leaking. Because it is made of plastic, the drip tray can eventually develop a crack. You will need to pull out the refrigerator from the wall, and take off the bottom panel on the back of your refrigerator in order to access the drip tray for replacement. This is an OEM part sourced directly from the manufacturer.
Jerrel from REDDING, CA
Cracked Evaporation tray was leaking water on kitchen floorI emptied refrigerator contents and tilted the refrigerator to the right so as to access the metal panel upon which the evaporation tray was resting. The metal panel is on the left side underneath the refrigerator and the evaporation tray is resting on the panel. I removed 4 screws that were holding the metal panel, pressed down on the panel, slid out the old, cracked plastic evaporation tray, inserted the new plastic evaporation tray, raised the metal panel to its original position, replaced the 4 screws, being careful not to pinched the water line that feeds the ice-maker. VOILA! Un-tilt the frig and re-stock it. It took a day for the temperature to stabilize, due to tilting, I think. New tray $45. Read more...
PartSelect Number PS11756974
Manufacturer Part Number WPW10655368
David from Traverse City, MI
Drip pan in the back bottom was cracked during shipping and leakedWe had periodic leaks from under the Unit from new, could never figure out where it was coming from. Finally as it began to cause damage to surrounding cabinets, we took the back off and found the multiple cracks in the drip pan. Someone had hand trucked it from the wrong side! It was difficult to figure out the fan removal (it sits in the pan) but push the top forward and pull the bottom back and the fan came out. Then the pan was simple to remove / replace, by reversing the removal procedure, the fan was re installed. Read more...
PartSelect Number PS6448035
Manufacturer Part Number 241920605NOTE: If this pan is different from original, it should be installed by a professional service technician.
PartSelect Number PS2331555
Manufacturer Part Number 241697602