Kenmore Refrigerator Grilles and Kickplates

Your Price

$75.15

Kenmore Refrigerator Kickplate Grille - Apollo Gray

★★★★★

21 Reviews

PartSelect Number PS11756053

Manufacturer Part Number WPW10534155

This kickplate grille is attached to the bottom of the refrigerator.

Installation Instructions

blane from upper arlington, OH

no symptoms (previousely damaged product)

Easy repair here, the Refridge was purchased at a discount as a scratch and dent model. the damage was superfical and the parts orderd were simple remove and replace job did not take long at all to replace all parts.

Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place. Read more...

Videos!

Your Price

$76.54

Kenmore Refrigerator Kickplate Grille - Black

★★★★★

17 Reviews

PartSelect Number PS11756051

Manufacturer Part Number WPW10534153

This kickplate grille is attached to the bottom of the refrigerator.

Installation Instructions

Kathleen from Gainesville, FL

Old one was broken and kept falling off. Very annoying

Snapped new cover on. Read more...

Your Price

$53.11

Kenmore Refrigerator Kickplate Grille

★★★★★

2 Reviews

PartSelect Number PS1991401

Manufacturer Part Number 241839407

This kickplate grille is attached to the bottom of the refrigerator.

Installation Instructions

Kevin from ONTARIO, CA

Only one way on my fridge the two ovals snap into place

Just pushed the grill on Read more...

Your Price

$66.20

Kenmore Refrigerator Kickplate Grille - Gray

★★★★★

3 Reviews

PartSelect Number PS3495494

Manufacturer Part Number 242054804

Your Price

$68.20

Kenmore Refrigerator Kickplate Grille - Black

★★★★★

11 Reviews

PartSelect Number PS11743705

Manufacturer Part Number WP67006687

Clips are sold separately. NOTE: As per the manufacture the white kickplate is no longer available.

Installation Instructions

Lonna from hubbard, OH

grille had a broken tab and one bucket was cracked

grille just pushed on no tools were needed and I just took out the cracked bucket and inserted the new one Read more...

Your Price

$48.27

Kenmore Refrigerator Kickplate Grille

PartSelect Number PS1991399

Manufacturer Part Number 241839405

This white kickplate grill is attached to the bottom of the refrigerator.

Installation Instructions

Dave from Lake Ronkonkoma, NY

Gaskets magnet was tearing out. Door Handle was Broken off, Kickplate was missing.

The gasket came off as one piece, so all that was needed was to push the new one on. The Door Handle was broken off when we attempted to move it, the repair was removing 3 screws and replacing them with the new Handle and screws. The Kickplate just clipped into place.

Everything was looking great untill 2 of the three parts went missing durning shipment. PartSelect refunded the money and sent out new parts. Chalk one up for FedEx. They said they deleiverd the packages(s) When in fact I got shipment 1 of 2. 2 Never showed up.

The repair went great and if it wasnt for FedEx, the shiping went great. Read more...

Your Price

$53.85

Kenmore Refrigerator Kickplate Grille

★★★★★

1 Review

PartSelect Number PS1525951

Manufacturer Part Number 240324411

Installation Instructions

Irene from Perkasie, PA

The actuator arm broke on the unit and it had to be replaced

The actuator arm was the only part that was a little difficult. The drip tray and the kick plate went on very easily. First, we went online to your schematic on the unit. This showed how it was assembled and how it came apart. We then terminated the power to the refrigerator, and removed the drip tray which exposed two screws holding in the face plate for the ice/water on the door of the refrigerator. We then removed three screws from the control panel and pulled it forward. This exposed the actuator and two more screws that held it into place. We removed them and unplugged the small plug giving power to the actuator. We then installed the new part and replaced all the screws that had been removed. We reassembled the face plate and the screws there and then snapped in the drip tray. When we turned on the power everything worked fine. Read more...

Videos!