LG Washer Hoses and Tubes
Popular LG Washer Hoses and Tubes
Your Price
$31.29
In Stock
LG Washer Hose with Bellows
PartSelect Number PS3523347
Manufacturer Part Number 4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillips head screwdriver to complete this repair; a clamp tool can also be helpful. Remove the screws holding the lid of the washer in place, and take off the lid. Locate the dispenser hose and remove its clamps. Place the clamps on the new hose, using the arrows for a guide in positioning the clamps. Install the new hose and reassemble all other parts.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
mark from AUBURN, CA
LG washing machine flooded the Landry room.
Wife called me and said the washing machine just flooded the Landry room. I looked at it and didn't see anything wrong. Took the top off and the back off and started looking for a leak, did not see anything. Took the front part of the washer apart thinking the drain hole was plugged up where the rubber boot is. It was ok after taking the big rubber boot off or whatever that is called i was not getting anywhere. I put it back together left the top and the back off. I turned the water on and started the washer on a quick cycle looking for a leak. I found the bellows at the inlet had a small leak fixed that and started the washer again. So what i found out was the clean out drain plug was not in tight letting water out as it was washing after i tightened it all was ok. So i did find a leak that was small that we never saw. The hardest part was putting that wire clamp on the rubber boot it took two people to do that.
Read more...
Your Price
$41.76
In Stock
LG Washer Tub-to-Pump Drain Hose
PartSelect Number PS3523345
Manufacturer Part Number 4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to the drain pump so the used water can properly empty from the tub. This part is made of rubber, is black in color and measures 13 inches long. Be sure to drain the excess water from the washer before completing this repair. This is an authentic OEM part that is sourced directly from the manufacturer.
Fixes these symptoms
- Leaking
- Will not drain
- See more...
Installation Instructions
Leslie from STOWE, VT
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Read more...
Your Price
$36.07
On Order
LG Washer HOSE ASSEMBLY,DRAIN
The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor). Read more...
PartSelect Number PS8749199
Manufacturer Part Number AEM73732901
This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pump, and it is responsible for transporting water out of the washing machine after a cycle. If the drain hose is kinked, damaged, or clogged, the washer will leak, or you may find standing water in the drum at the end of the cycle. Each drain hose comes with a metal clamp for fastening.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Terry from SIMI VALLEY, CA
Drain hose had a pin hole leak external to washer
Very close to the installation video online at Parts Select. Removed the back panel, unclipped the hose from the inner fitting and replaced with the rear hose. Why it didn;t leak on the inside is interesting as there was no clip on the at the inner fitting.The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor). Read more...
Your Price
$32.14
In Stock
LG Washer Tub-to-Pump Hose
PartSelect Number PS3617213
Manufacturer Part Number AEM73213001
This is a drain hose assembly for top-load models of LG washing machines. This hose specifically is used to allow water to drain from the tub to the drain pump of the washer. This hose is made of plastic and comes with two clamps to secure it within your washer, one on each end. If you notice your washer is leaking check to make sure if this hose is cracked or damaged, because it will need to be replaced immediately. This drain hose is an OEM part that is sold individually and will require you to disassemble part of your washer to replace it.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Victor from ADDISON, IL
leaking water
Removed the back of the washing machine looked to see where the water was leaking from removed the hose to find a smell crack - ordered a new hose dried up everything with old towels took compressed air and blew off all electrical wires and connectors total time 15 minutes
Read more...
Your Price
$50.41
In Stock
LG Washer Hose Assembly,Drain
PartSelect Number PS3527325
Manufacturer Part Number 5215ER2002G
The drain hose assembly is a genuine OEM assembly supplied directly by LG for use in washing machines. The assembly includes the hose, connector, elbow fitting, and metal clamp. It is responsible for directing wastewater from the washing machine tub to the household drain or plumbing system. It allows the water to exit the washer efficiently and prevents it from pooling inside the machine at the end of the cycle. If the hose can no longer stay attached to the washer or drainpipe, water is leaking from the hose, or the hose has visible damage such as cracks and splits then you will need to replace it before you can resume using your washer.
Fixes these symptoms
- Leaking
- Will not drain
- See more...
Installation Instructions
Roy C from KNOXVILLE, TN
Moldy smell inside, door boot seal showed signs of mold
Watched several YouTube DIY videos and followed the step by step directions. I also disconnected several other hoses and cleaned them out. Since I live in an hard-water area, deep cleaning may become a 6- month preventative maintenance routine.
Read more...
Your Price
$12.29
In Stock
LG Washer Hose,Connector
PartSelect Number PS3527289
Manufacturer Part Number 5214FR4006G
This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle is not working. If the hose breaks, it will not be able to drain the water properly, and you may experience a water leak. Be sure to disconnect your washer from the power source, as well as the water source before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Leaking
- Will not drain
- See more...
Your Price
$27.23
In Stock
LG Washer Hose
PartSelect Number PS3523351
Manufacturer Part Number 4738ER2002A
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
michael from GRANTS PASS, OR
WASHER WOULD NOT EMPTY WATER DURING RINSE
I BROUGHT UP THE YOUTUBE REPAIR VIDEO AND FOLLOWED IT STEP BY STEP AND WORKED OUT GREAT THANKS
Read more...
Your Price
$33.37
In Stock
LG Washer Drain Hose
PartSelect Number PS3527285
Manufacturer Part Number 5214FR3188G
This drain hose is a genuine OEM replacement part that is specially made for LG washing machines. It is a flexible rubber pipe designed to remove wastewater from the washer. When the washing machine goes through its drain cycle, water is pumped out of the drum and into the drain hose assembly, which then directs the water out of the machine. The drain hose is attached to the back of the washing machine at one end and connected to a drain pipe or standpipe at the other end. The hose assembly includes one standard connector at one end of the hose and an elbow fitting on the other. These connectors ensure that the hose remains securely attached to the washing machine and the drain pipe to prevent leaking, and kinks, and to ensure efficient drainage.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Dennis from Sauk City, WI
drain hose was full of cracks
Slide out double stack unit, take the back off, stand on my head and reach in to remove hose clamo off pump hose. slide new hose on and clamp, but back on, and slide washer/dryer stack back in to place.
Read more...
Your Price
$13.47
On Order
Your Price
$32.08
In Stock
LG Washer Hose Assembly,Connector
PartSelect Number PS3527317
Manufacturer Part Number 5215EA3003A
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Victor from ADDISON, IL
leaking water
Removed the back of the washing machine looked to see where the water was leaking from removed the hose to find a smell crack - ordered a new hose dried up everything with old towels took compressed air and blew off all electrical wires and connectors total time 15 minutes
Read more...
