LG Washer Pumps

LG Appliance Parts
Shop By Part Type

Popular LG Washer Pumps

Your Price
$49.32
  In Stock
Washing Machine Drain Pump and Motor Assembly
★★★★★
★★★★★
(139)
PartSelect Number PS3579318
Manufacturer Part Number 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.
Fixes these symptoms
  • Engine runs but does not pump water
  • Leaking
  • Noisy
  • See more...
Installation Instructions
Jorge from Apple Valley, CA
Washing maching wouldn't drain
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver. Read more...
Your Price
$90.33
  In Stock
Washer Drain Pump
★★★★★
★★★★★
(4)
PartSelect Number PS7785505
Manufacturer Part Number 5859EA1004F
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Installation Instructions
Jesus from El Paso, TX
It did not drain water, cycle stops at rinse+spin.
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes. Read more...
Your Price
$17.48
  In Stock
Pump Filter
★★★★★
★★★★★
(8)
PartSelect Number PS3522306
Manufacturer Part Number 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.
Fixes these symptoms
Installation Instructions
Sandra from Livonia, MI
The pump filter leaked after cleaning it out. Would work with teflon tape, but wanted to see if a new part would eliminate the need to wrap it every time.
Unscrewed the old part; screwed in the new part and said a quick prayer - LOL!
The part worked great, but I wanted to mention how quickly I received the part!
I would definitely order from this company again!
Read more...
Your Price
$15.91
  In Stock
Pump Casing
★★★★★
★★★★★
(1)
PartSelect Number PS3518248
Manufacturer Part Number 3108ER1001B
This part connects to the drain pump and motor.
Fixes these symptoms
Your Price
$79.23
  In Stock
MOTOR
PartSelect Number PS3652448
Manufacturer Part Number EAU61383503
Fixes these symptoms
Your Price
$130.49
  In Stock
PUMP ASSEMBLY,DRAIN
PartSelect Number PS3636111
Manufacturer Part Number 5859EA1004G
Your Price
$91.69
  In Stock
MOTOR ASSEMBLY,AC,PUMP
★★★★★
★★★★★
(3)
PartSelect Number PS7785119
Manufacturer Part Number 4681EA1007A
Fixes these symptoms
Your Price
$132.94
  In Stock
PUMP ASSEMBLY,DRAIN
PartSelect Number PS3636113
Manufacturer Part Number 5859EA1004K
Installation Instructions
Adam from W LAFAYETTE, OH
Water wouldn't drain out of tub.
This is a15 minute , 1 person job. Tools needed: Phillips screwdriver, pliers to unhook drain hoses from pump, 10mm socket, flashlight or a good light source,
and some rags to clean up water. Unplug washer from outlet, drained out as much water as possible, turned it away from wall so I had room. Unscrewed 4 screws from back panel. Unhooked drain hose from tube to pump, some water will leak out, have towels ready to soak up. Then unhook the other drain hose from pump to wall drain. Get your 10mm socket with ratchet ready, unhook the blue and white wires that attach to pump, then use your ratchet to remove 3 bolts that hold pump. Replace in reverse order. This is a very easy job.
Read more...
Circulation Pump Motor - 120V 60Hz
PartSelect Number PS3523285
Manufacturer Part Number 4681EA2002H
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water.
Knob - Chrome
PartSelect Number PS3524474
Manufacturer Part Number 4941ER3005A
Sold individually. This knob accepts a D-shaped shaft.

Related Parts