My Orders
LG Washer Caps and Lids
GET YOUR OFFICIAL LG PARTS TO ENSURE VICTORY
Popular LG Washer Caps and Lids
This is an OEM lint filter guide cover made for LG dryers. This is one of three pieces in the entire lint filter assembly, along with the lint filter guide and filter itself, which are both sold separately from this. This guide cover is made entirely of plastic and measures approximately 16 inches wide. If the lint filter assembly for your dryer is broken, chipped, or cracked, and ultimately cannot perform efficiently anymore, covers like this must be replaced immediately. This cover comes individually and without any accompanying parts, so be sure to check your lint filter assembly for the necessary parts before ordering.
This is an OEM lint filter guide cover made for LG dryers. This is one of three pieces in the entire lint filter assembly, along with the lint filter guide and filter itself, which are both sold separately from this. This guide cover is made entirely of plastic and measures approximately 16 inches wide. If the lint filter assembly for your dryer is broken, chipped, or cracked, and ultimately cannot perform efficiently anymore, covers like this must be replaced immediately. This cover comes individually and without any accompanying parts, so be sure to check your lint filter assembly for the necessary parts before ordering.
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Installation Instructions
Kristen from Safford, AZ
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from
... Read more
the pulsator holding (where the screw goes) which may have caused the problem to begin with.
Read less
Located just inside the dryer door. The guide cover (or grill cover) is where the hot air circulates through the appliance. This part may crack or become damaged over time, causing clothes to get caught on it while it is in motion. Open the dryer door, remove the lint screen, and remove the screen using your screwdriver. Line up the new grill cover with the moisture sensor and the housing on either side, and it should snap into place. Once it is firmly in place, use your screwdriver to put the screws back in.
Located just inside the dryer door. The guide cover (or grill cover) is where the hot air circulates through the appliance. This part may crack or become damaged over time, causing clothes to get caught on it while it is in motion. Open the dryer door, remove the lint screen, and remove the screen using your screwdriver. Line up the new grill cover with the moisture sensor and the housing on either side, and it should snap into place. Once it is firmly in place, use your screwdriver to put the screws back in.
Installation Instructions
mary f from BERMUDA DUNES, CA
screen and filter need to be replaced
remove filter , unscrew old screen , clean old area and screw back screen and replace filter
This door lid assembly is a genuine OEM replacement assembly that is compatible with various LG pedestal washers. It includes the door lid, which has a diameter of 19.5 inches, and two white plastic hinge pins. The lid is a protective covering that ensures that the water, clothes, and detergent remain inside the washer during use. It also ensures the safety of users by preventing access to the moving parts of the washer which can cause injuries. Over time the lid may fail due to aging, mechanical stress from opening and closing, or due to accidental damage. If the lid is damaged or otherwise faulty, you will likely have difficulties opening and closing the lid and the washer may be unable to advance through the cycles. It is recommended to avoid using the washer until you have installed a new lid.
This door lid assembly is a genuine OEM replacement assembly that is compatible with various LG pedestal washers. It includes the door lid, which has a diameter of 19.5 inches, and two white plastic hinge pins. The lid is a protective covering that ensures that the water, clothes, and detergent remain inside the washer during use. It also ensures the safety of users by preventing access to the moving parts of the washer which can cause injuries. Over time the lid may fail due to aging, mechanical stress from opening and closing, or due to accidental damage. If the lid is damaged or otherwise faulty, you will likely have difficulties opening and closing the lid and the washer may be unable to advance through the cycles. It is recommended to avoid using the washer until you have installed a new lid.
Installation Instructions
Zach from REYNOLDS, IL
Door Latch Broke causing washer to leak - This was the fix!
Our toddler stood on the handle of the pedestal washer - broke it - but we didn't know how much of a problem this was until the washer started to leak. Well, gravity doesn't work backwards, so I started with assuming the door seal was wrong instead of any drains or hoses. Ordered this part (which was perfect by the way) and fixed it right
... Read more
away.
Special note: you DO NOT need additional hinges as the replacement door comes with them already. To replace the hinges, simply push them out from the back side (i.e. opposite end where they are compressed). Installing new ones is easy, almost too easy to where you think it is not enough, but if they are seated and the door operates it is fine.
Exceptionally easy fix. Was able to do it with two sleeping kids under 3 years old never waking up in less than 5 minutes. 100% satisfied.
Special note: you DO NOT need additional hinges as the replacement door comes with them already. To replace the hinges, simply push them out from the back side (i.e. opposite end where they are compressed). Installing new ones is easy, almost too easy to where you think it is not enough, but if they are seated and the door operates it is fine.
Exceptionally easy fix. Was able to do it with two sleeping kids under 3 years old never waking up in less than 5 minutes. 100% satisfied.
Read less
This part is the replacement lint filter cover for your dryer. It is made of gray plastic and is approximately 11-1/2 inches by 1-1/4 inches. The lint filter cover fits on top of the lint filter and protects it. The main reason you would want to replace the lint filter cover is if it is cracked or broken. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
This part is the replacement lint filter cover for your dryer. It is made of gray plastic and is approximately 11-1/2 inches by 1-1/4 inches. The lint filter cover fits on top of the lint filter and protects it. The main reason you would want to replace the lint filter cover is if it is cracked or broken. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Discover the superior quality of the LG Parts Assembly, specially designed to seamlessly fit with selected LG washer models. This authentic OEM item crafted by LG ensures pristine functionality and durability. Enhance your appliance with this washer lid, skillfully engineered to cover the tub opening of your washer. Putting safety first, please ensure to protect your hands with work gloves when installing this part. With intuitive design, this washer lid ensures precision and reliability, improving your appliance's efficiency. Embrace the luxury of LG, and elevate your appliance performance with this Parts Assembly.
Discover the superior quality of the LG Parts Assembly, specially designed to seamlessly fit with selected LG washer models. This authentic OEM item crafted by LG ensures pristine functionality and durability. Enhance your appliance with this washer lid, skillfully engineered to cover the tub opening of your washer. Putting safety first, please ensure to protect your hands with work gloves when installing this part. With intuitive design, this washer lid ensures precision and reliability, improving your appliance's efficiency. Embrace the luxury of LG, and elevate your appliance performance with this Parts Assembly.
This washing machine lid assembly is a genuine OEM replacement designed to cover the tub opening, ensuring water containment and safe operation during wash cycles. Built for durability, it helps prevent leaks, reduce noise, and maintain proper function. A damaged or faulty lid can lead to issues such as the washer not starting or water escaping during use. Installation is straightforward—remove the old lid and secure the new assembly according to your appliance’s guidelines for a reliable fit.
This washing machine lid assembly is a genuine OEM replacement designed to cover the tub opening, ensuring water containment and safe operation during wash cycles. Built for durability, it helps prevent leaks, reduce noise, and maintain proper function. A damaged or faulty lid can lead to issues such as the washer not starting or water escaping during use. Installation is straightforward—remove the old lid and secure the new assembly according to your appliance’s guidelines for a reliable fit.
This washer lid assembly is designed for top-load washing machines and seals the tub during operation to support safe, efficient washing cycles. Finished in white and constructed from durable materials, the lid helps prevent water leaks, reduce operating noise, and ensure proper operation by covering the tub opening during use. Replacing a cracked, damaged, or worn lid can restore normal washer function and improve overall performance. Installation involves removing the existing lid hardware, transferring any required hinges or components, and securing the new lid in place according to the washer’s original configuration.
This washer lid assembly is designed for top-load washing machines and seals the tub during operation to support safe, efficient washing cycles. Finished in white and constructed from durable materials, the lid helps prevent water leaks, reduce operating noise, and ensure proper operation by covering the tub opening during use. Replacing a cracked, damaged, or worn lid can restore normal washer function and improve overall performance. Installation involves removing the existing lid hardware, transferring any required hinges or components, and securing the new lid in place according to the washer’s original configuration.
Introducing the unique Cap Cover, a genuine OEM item exclusively crafted by LG. This remarkable component is best suited for specific LG models of washers, serving as a valuable part of the dispenser cup system. The Cap Cover has a special role in your machine as it attaches to the washer's top panel, providing an enclosure for the bleach dispenser. Although it may bear resemblance to other parts, it is essential to verify compatibility with your model as minor variations in size and shape may occur. Installation tip: Always wear work gloves to ensure your hands are protected. Dive into a hassle-free appliance repair experience with this high-quality LG-made Cap Cover.
Introducing the unique Cap Cover, a genuine OEM item exclusively crafted by LG. This remarkable component is best suited for specific LG models of washers, serving as a valuable part of the dispenser cup system. The Cap Cover has a special role in your machine as it attaches to the washer's top panel, providing an enclosure for the bleach dispenser. Although it may bear resemblance to other parts, it is essential to verify compatibility with your model as minor variations in size and shape may occur. Installation tip: Always wear work gloves to ensure your hands are protected. Dive into a hassle-free appliance repair experience with this high-quality LG-made Cap Cover.