LG Washer Ducts and Vents

Your Price

$10.70

PartSelect Number PS3535020

Manufacturer Part Number MCQ41502701

This is a pump bracket damper for models of LG washing machines. This damper is used to protect the pump within the washer from excessive vibration damage during the washing cycle. If your washing machine is vibrating or making an excessive amount of noise during the cycle, these dampers could be worn out and in need of replacement. This damper is made of rubber and measures approximately 1 inch long and 1 inch wide. Replacing this damper will require you to access the underside of the washer, or wherever the pump location is for your model. This OEM damper is sold individually, and most washers use 2-3 of these dampers for the pump bracket, so consider how many you need before ordering.

Your Price

$36.85

LG Washer Cover Filter

PartSelect Number PS3634953

Manufacturer Part Number 3550EL2004B

This is a lint filter guide cover for models of LG dryers. This guide cover is installed over the lint filter housing within your dryer and ensures that the lint filter is secured during the drying cycle and can be removed afterward. This cover guide measures approximately 15 inches long and 3.75 inches wide and is made of durable plastic that features two securing holes on either side of it that fasten it within your dryer. To replace this OEM guide cover, you will need a Philips-head screwdriver to remove and install it. This guide cover is sold individually and does not include the necessary securing screws.

Installation Instructions

JOSEPH from MANHASSET, NY

Broken link vet flap

Removed the old vent trap 3 screws total and replaced the new very quick and easy. Read more...

Videos!

Your Price

$80.82

LG Washer Side Venting Kit

★★★★★

6 Reviews

PartSelect Number PS3575086

Manufacturer Part Number 3911EZ9131X

This dryer side vent kit lets you vent the exhaust to the side or bottom of your dryer instead of the default rear position. Included in the kit are 2 straight aluminum foil outlet ducts, each 4 inches wide, along with 1 duct elbow, 1 cover plate, 1 screw, and an instruction sheet. This is helpful for flexible installation in areas where rear venting is not possible or practical. All parts are genuine replacements from their original manufacturer.

Installation Instructions

ROBERT from DAWSONVILLE, GA

Install aftermarket side vent kit

I did as I was told (by my wife). Bought the machine from Home Depot - no side vent kit - had them complete the installation today when the kit came. Read more...

Your Price

$36.85

LG Washer Guide Filter

PartSelect Number PS3524629

Manufacturer Part Number 4974EL1003B

The filter guide is found in your dryer and is what houses and supports the lint screen located in the exhaust air duct. This part is located at the bottom part of the dryer opening. The housing is approximately 14 inches long and 5 inches wide, with a moon shape on the top where the lint trap goes. The filter guide may break of wear down over time and with repeated use, and may need to be replaced. This OEM part comes right from the manufacturer and is sold individually.

Installation Instructions

George from Croton on Hudson, NY

The holder for the lint screen was removed to vacuum lint. It broke when turned on.

I found that the screws that hold it in were a bit too short. After several cleanings I re inserted the screen only to have it dislodge and break. I ordered a new part and after using a drift pin and lamp I found that the screws were too short and the threads needed to secure it were worn. Longer screws solved the problem. Read more...