Maytag Dryer Legs and Feet
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Dryer Legs and Feet
Your Price
$6.40
In Stock
Maytag Dryer Leveling Foot
PartSelect Number PS1609293
Manufacturer Part Number 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
Bryan from west valley city, UT
dryer had no heat, all other functions worked
After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly
Read more...
Your Price
$11.77
In Stock
Maytag Dryer Rubber Foot Pad
PartSelect Number PS11738859
Manufacturer Part Number WP210684
The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Many of our customers have rated this repair as very easy. To complete the repair, turn the old leg counter clockwise to remove it. Then, simply remove the old pad and replace it with the new one. Finally, re-attach the leg by turning clockwise. Ensure that the washer is level, and adjust the leg accordingly if it is not.
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
Read more...
Your Price
$7.09
In Stock
Maytag Dryer Rubber Leveling Leg Foot Pad
Locating replacement parts was the problem until I found partselect.com Read more...
PartSelect Number PS11757547
Manufacturer Part Number WPY314137
This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
Dennis from Granada Hills, CA
Warn out foot pads
Pried off old pads - used hammer to tap on new pads. Locating replacement parts was the problem until I found partselect.com Read more...
Your Price
$29.47
In Stock
Maytag Dryer Levelling Feet, Pack Of 4
PartSelect Number PS11770254
Manufacturer Part Number W11025920
Introducing the Whirlpool Leveling Feet, a genuine OEM part designed for optimal function and compatibility with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. This pack of four leveling legs provides sturdy support and ensures the stability of your dryer by facilitating height adjustments. Maintain the balance of your dryer conveniently with this kit, specially designed to mitigate floor irregularities. Prior to installing this part, disconnect the power and consider wearing work gloves for hand protection. The precision design promises a flawless fit and easy installation. Enhance the efficiency of your dryer with our Whirlpool Leveling Feet.
Installation Instructions
ESTELA from Houston, TX
Had 2 feet missing from dryer
He had to put it flat on one side in order to put the legs on it.
Read more...
Your Price
$28.42
In Stock
Maytag Dryer Leveling Feet
PartSelect Number PS12749516
Manufacturer Part Number W11444912
Introduce the ideal addition for your home appliance repair needs with the FEET-LVLNG Dryer leveling leg set of 4 from Whirlpool. As a genuine OEM part, these leveling legs are tailored to work for select models from brands like Whirlpool, KitchenAid, Maytag, Jenna-Air, Amana, Inglis, and Magic Chef. This set adds significant stability to your dryer by providing optimal support and easy modifications for the height of your dryer. It is advised to disconnect power supply before installation to ensure safety and we recommend wearing work gloves during fitting. So, ensure your dryer is operating at its most efficient level and maintain its stability with this premium set of leveling legs.
Your Price
$17.15
Special Order
Maytag Dryer Adjustable Leveling Leg
PartSelect Number PS2021026
Manufacturer Part Number 22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Your washer should be kept as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This genuine OEM replacement part is sold individually, so be sure to order the amount you need.
Installation Instructions
Rebecca from Wylie, TX
Stripped leveler screw making impossible to level my washer
Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy.
Read more...
Your Price
$9.62
In Stock
Your Price
$10.19
Special Order
Your Price
$17.15
Special Order
Maytag Dryer Refrigerator Leveler
Steve Read more...
PartSelect Number PS12114323
Manufacturer Part Number W11117769
This is an OEM part that is made of metal and sold individually. The leveling leg is generally used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. The leveling leg is meant to keep your appliance steady and level to the floor. If you notice your appliance is uneven to the floor it may need to have the leveling leg replaced. You will notice that the bottom of the leveling leg has a smooth surface to ensure moving your appliance does not require as much effort. This part screws into a pre-drilled hole underneath the appliance.
Installation Instructions
stephen from montgomery, NY
No leveling legs
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.Steve Read more...
Your Price
$17.15
In Stock
Maytag Dryer Leveling Foot & Nut
hard to find parts - order on Thurs evening and got Sat - made problem really easy Read more...
PartSelect Number PS11746502
Manufacturer Part Number WP8563585
This individual levelling foot is compatible with different types of standing home appliances and is a genuine OEM part. Made of high-quality metal and featuring a metal securing nut, this levelling foot is made of plastic and is used to level the pedestal for your appliance. Over time and through gradual wear and tear of moving your appliance around or through excessive movement and impact, a levelling leg will crack and break, and eventually destabilize itself. If you find your appliance is imbalanced or vibrates excessively when in use, this levelling foot may need to be replaced. Since most appliances take one foot on each corner, 4 corners being 4 feet, it is important to consider the amount of feet you require when ordering. This levelling foot is adjustable, since it comes with the securing nut, adding longevity to the levelling foot and your appliance. To replace this foot, simply lift the corner of the pedestal from the floor, unscrew and remove the previous foot, and install the new foot, adjusting its height with the nut.
Installation Instructions
Linda from Arcadia, IN
missing parts on used washer and dryer pedstals
screwed onhard to find parts - order on Thurs evening and got Sat - made problem really easy Read more...
Related Maytag Dryer Parts
- All Maytag Dryer parts
- Maytag Dryer Belts
- Maytag Dryer Brackets and Flanges
- Maytag Dryer Caps and Lids
- Maytag Dryer Circuit Boards and Touch Pads
- Maytag Dryer Dispensers
- Maytag Dryer Doors
- Maytag Dryer Drums and Tubs
- Maytag Dryer Ducts and Vents
- Maytag Dryer Elements and Burners
- Maytag Dryer Fans and Blowers
- Maytag Dryer Filters
- Maytag Dryer Fuses
- Maytag Dryer Handles
- Maytag Dryer Hardware
- Maytag Dryer Hinges
- Maytag Dryer Hoses and Tubes
- Maytag Dryer Knobs
- Maytag Dryer Latches
- Maytag Dryer Lights and Bulbs
- Maytag Dryer Motors
- Maytag Dryer Panels
- Maytag Dryer Power Cords
- Maytag Dryer Pulleys
- Maytag Dryer Seals and Gaskets
- Maytag Dryer Sensors
- Maytag Dryer Springs and Shock Absorbers
- Maytag Dryer Switches
- Maytag Dryer Thermostats
- Maytag Dryer Timers
- Maytag Dryer Trims
- Maytag Dryer Valves
- Maytag Dryer Wheels and Rollers
- Maytag Dryer Wire Plugs and Connectors