Maytag Dryer Filters

Find your part

Enter your model number or a part number and click "Search"
Need help finding your model number?
Here is an example model number plate:
tag sample
Maytag Appliance Parts
Shop By Part Type

Popular Maytag Dryer Filters

Your Price
$47.43
  In Stock
Lint Filter
★★★★★
★★★★★
(82)
PartSelect Number PS1491676
Manufacturer Part Number W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which can be a fire hazard. Continue to check often to make sure the filter and slot are both cleared of lint.
Fixes these symptoms
  • Door won’t close
  • Marks left on clothes
  • No heat or not enough heat
  • See more...
Installation Instructions
JEFFREY from FALL RIVER, MA
felt strip came off lint screen
ordered new lint screen, removed old screen, inserted new screen. Read more...
Your Price
$24.56
  In Stock
Lint Filter
★★★★★
★★★★★
(63)
PartSelect Number PS11741039
Manufacturer Part Number WP33001003
This lint filter is a genuine OEM replacement filter for your dryer. Replacing it is easy as it just slides in like your normal filter. Make sure to check the filter slot for excess buildup of lint, and clean it out after every use of the dryer.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
Installation Instructions
Raymond from West Bend, WI
electric dryer was rumbling - wheel or belt?
Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow. Read more...
Your Price
$37.89
  In Stock
Lint Filter
★★★★★
★★★★★
(64)
PartSelect Number PS11741075
Manufacturer Part Number WP33001808
This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess buildup of lint when changing the filter, and clean it after every use.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
Installation Instructions
Anthony from DeKalb, IL
Lint into venting area.
Removal of old lint collector and replace with new one. Read more...
Your Price
$20.52
  In Stock
Lint Filter
★★★★★
★★★★★
(58)
PartSelect Number PS11741140
Manufacturer Part Number WP33002970
This is a replacement lint filter for your dryer. Replacing this part is easy as it requires no disassembly of the unit. Make sure to clean the filter after every use of your dryer, and check the filter slot for excess lint buildup.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
Installation Instructions
Daniel from Millmont, PA
Dryer wouldn't heat
This was the first time I ever attempted such a repair on an appliance, but it was fairly easy once I figured out how to take the front of the dryer off! I was almost certain that the igniter was the problem was it didn't glow like it did before. On this particular LP Gas dryer from Maytag there is a little service door on the front near the floor. It is almost impossible to get your arm in there plus still have room to shine light in! I took off the two screws at an angle down near the floor and the whole front came off. I used a mini socket wrench to disconnect the igniter. I didn't have to remove the screw as the part slips on over the screw, then you just tighten the screw, connect the cable and it worked perfectly! Thanks PartSelect! As for the lint filter...the original has been broken for probably close to 10 years. It was just a matter of slipping the new one in. Read more...
Your Price
$47.41
  In Stock
Assembly, Lint Screen
★★★★★
★★★★★
(15)
PartSelect Number PS11746639
Manufacturer Part Number WP8572270
Also known as Lint Screen. Handle is white in color.
Fixes these symptoms
Your Price
$50.01
  In Stock
Lint Filter
★★★★★
★★★★★
(20)
PartSelect Number PS11741919
Manufacturer Part Number WP37001142
Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • Door won’t close
  • Marks left on clothes
  • No heat or not enough heat
  • See more...
Installation Instructions
Tim from South Glens Falls, NY
The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken
I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra set of hands to hold the gasket in place while you stretch it over the the panel. The vent manifold is held in place with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, so I bought one of them too. Now have an extra lint screen Read more...
Your Price
$41.12
  In Stock
Lint Filter
★★★★★
★★★★★
(15)
PartSelect Number PS11731421
Manufacturer Part Number W10859086
This is the replacement lint screen for your dryer. It is made of plastic and is approximately 14 inches by 9 inches. The lint screen traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint screen is cracked or clogged, the dryer takes too long to dry, or excessive lint is accumulating inside the dryer or its venting, you may need to replace it. Simply remove the old, damaged filter, and replace it with the new one.
Your Price
$54.63
  In Stock
Lint Filter
★★★★★
★★★★★
(13)
PartSelect Number PS11738127
Manufacturer Part Number W10874409
This lint filter screen has a white handle. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
Installation Instructions
Katharine from Palm Springs, CA
The lint filter was seriously damaged
After the new filter arrived, I took the old filter out, put the newe one in. No tools, no difficulty at all. Actually, the really difficult part of this entire episode was finding the model number on the dryer. It was on the underside of the door. Read more...
Your Price
$47.08
  In Stock
Lint Filter
★★★★★
★★★★★
(10)
PartSelect Number PS11755878
Manufacturer Part Number WPW10516085
NOTE: As per manufacture the felt seal is no longer needed with the lint filter.
Installation Instructions
Tammy from JACKSONVILLE, FL
The screen in the lint filter was broken
Since it was a dryer filter, it just had to be put in the dryer. Works GREAT!! Read more...
  No Longer Available
Dryer Lint Screen Filter
PartSelect Number PS11757278
Manufacturer Part Number WPW10717210
This filter collects lint as it passes through the dryer vent. Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.

Related Parts

Back to Top