Maytag Dryer Fans and Blowers

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Maytag Appliance Parts
Shop By Part Type

Popular Maytag Dryer Fans and Blowers

Videos!
Your Price
$22.88
  In Stock
Maytag Dryer Blower Wheel with Clamp
★★★★★
★★★★★
93 Reviews
PartSelect Number PS2200270
Manufacturer Part Number Y303836
This comes with a metallic hub clamp to hold it firmly in place. The blower wheel with clamp is part of your dryer assembly. You will find this part attached to the drive motor shaft, which disperses air through the drum and out of the exhaust vent. This part might need to be replaced if you notice your dryer is taking too long to dry clothing, it is not tumbling, or is making any unusually loud noises. The blower wheel measures about 7.5 inches in diameter by 3-3/8 wide. The blower wheel can be accessed by removing the front panel of your appliance.
Fixes these symptoms
Installation Instructions
Stephen from Lafayette, IN
The blower fan (nylon) stripped off the motor shaft (steel)
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. Read more...
Videos!
Your Price
$36.63
  In Stock
Maytag Dryer Blower wheel
★★★★★
★★★★★
18 Reviews
PartSelect Number PS11743785
Manufacturer Part Number WP694089
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
Fixes these symptoms
Installation Instructions
Daniel from Coatesville, PA
Bought motor, then bought blower wheel also
couldn't get blower wheel off of the motor. really tight. rounded off the wheel's square hub while trying to hold it still as I turned the motor shaft out. No, I wasn't turning it the wrong way :) I ended up going to the back of the dryer and using the multimax to quickly cut the wheel away from the hub. I love that oscillating saw! Just for fun, I put the motor in a bench vise and got the wheel hub off (in pieces). VERY tight! Ordered new wheel, and the job was smooth sailing from there on. I am guessing that experienced repair people automatically order the motor and blower wheel at the same time(?) BTW both parts were perfect matches for the originals. Not surprised; this has always been my experience with partselect.com! Read more...
Videos!
Your Price
$71.02
  In Stock
Maytag Dryer Blower Wheel
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11743811
Manufacturer Part Number WP697772
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.
Fixes these symptoms
Installation Instructions
joe from cheswick, PA
craked blower motor
somthing fell down in the blower motor compartment and busted up the bloewr motor fan,and was making noise and out of balance.i changed the blower motor and runs like a charme Read more...
Videos!
Your Price
$54.64
  In Stock
Maytag Dryer Blower Wheel
★★★★★
★★★★★
4 Reviews
PartSelect Number PS2035614
Manufacturer Part Number 33001790
This blower wheel does not come with a spring clamp, but it does have twenty fins and it is designed to fit a 3/8 of an inch motor shaft.
Fixes these symptoms
Installation Instructions
Terry from Caruthersville, MO
loud noise inside dryer
After changing all the rollers in the dryer (which didn't fix the problem) I decided to take apart the blower. Sure enough, that was the problem. As the dryer heated up, the damaged wheel would swell and start rubbing the housing. I replaced both and fixed the problem. The repair was pretty easy, since I had taken the dryer apart several times replacing the rollers. Read more...
Videos!
Your Price
$64.27
  In Stock
Maytag Dryer Blower Wheel
★★★★★
★★★★★
10 Reviews
PartSelect Number PS2052494
Manufacturer Part Number 56000
If your dryer is noisy, will not tumble, or is not producing enough heat, you may need to replace the blower wheel. This part is white in color, and is made of plastic. This part is approximately 8 inches in diameter. The blower wheel is located near the bottom of your dryer cabinet. To access it for this repair, you will need to remove both the front panel and the front bulkhead assembly. Before you begin this repair, be sure to disconnect the power source to the dryer. To complete this repair, you will need a 5/16 inch nut driver, a 1/4 inch nut driver, a pair of locking pliers and a 7/8 socket with a short extension and a ratchet.
Fixes these symptoms
Installation Instructions
Rick from Birch Run, MI
Blower fan cracked
Unplug the power cord from the unit. Remove the lower front panel; then the upper front panel including the door (unplug wire to door switch). Then remove the cover on the fan housing. Need to block the motor from turning; I used a stick to jamb the front of the motor; then unscrew the old blower fan and screw on the new one. Then replace the cover and put front panels back on. Read more...
Your Price
$73.95
  In Stock
Maytag Dryer Blower Wheel
★★★★★
★★★★★
1 Review
PartSelect Number PS11753413
Manufacturer Part Number WPW10349492
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct.
Fixes these symptoms
Your Price
$75.65
  In Stock
Maytag Dryer Blower Wheel - B/10 Models
★★★★★
★★★★★
8 Reviews
PartSelect Number PS2030820
Manufacturer Part Number 31001043
This blower wheel is suitable for some clothes dryers of the 10 and earlier series. Manufactured to fit a 1/2 inch motor shaft, this blower wheel is 3-1/8 inches deep. The diameter of the wheel is 7-1/8 inches, and the spring clamp is not included.
Fixes these symptoms
Installation Instructions
Tim from Jacobus, PA
Dryer was making horrible noise,
First I removed the 2 screws behind the door just below the slot for the lint trap(t-15 torx screws). I then popped the top of the dryer off using a flat tipped screw driver and using a 8mm. socket and extension I removed the 2 sheet metal screws from inside of the top corners of the front panel which attach it to the side panels. After that I could lean the front panel away from the unit and unplug the door switch being careful to mark the wires so I wouldn't have to take it apart again in the instance that I hooked them up wrong. I then leaned the front panel out a little more and lifted it off of the pins that lock the bottom of the front panel in. After that, I removed the sheet metal screws(8 mm.) that secure the fan housing cover and removed the old fan which was easy as it had spun the center out of itself and basically fell off, this is what was making all the racket. I removed the c-clip which rides in the groove at the end of the shaft with a flat tip and a pair of pliers, slid the new fan blade over the shaft, gave it a few light taps with the end of a hammer handle to seat it properly and installed the tension clamp with some pliers and popped the c-clip back on. I reversed the tear down procedures and reassembled the drier. Thanks to a little no-how, mechanical inclination, and the right parts, I was able to restore my drier to like new, virtually silent operation for about $40 as opposed to buying a new unit or paying a repairman $80 to $100 per hour plus parts to do the job. PartSelect.com made specifying and ordering the correct parts the first time a breeze and their prices are a bargain to boot.
Thanks, Read more...
Your Price
$73.20
  In Stock
Maytag Dryer Blower Wheel
PartSelect Number PS11722913
Manufacturer Part Number W10801999
This blower wheel is for dryers and attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent
Installation Instructions
Hector from CASTROVILLE, TX
Dryer blower wheel (made of plastic) broke.
I removed the back panel of the dryer, and then the exhaust panel, then rotated the broken piece clockwise (it has left-handed threads) to disengage it from the shaft. I popped out the broken piece, popped in the new wheel, and rotated it in a counterclockwise direction to set it in place. All that was left to do was to replace the exhaust panel and the back of the dryer. It was simple! Read more...
Your Price
$81.39
  In Stock
Maytag Dryer Blower Wheel
PartSelect Number PS11741126
Manufacturer Part Number WP33002797
Fixes these symptoms
Your Price
$76.45
  In Stock
Maytag Dryer Blower Wheel
PartSelect Number PS11746331
Manufacturer Part Number WP8544737
This blower wheel is for dryers and attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent
Installation Instructions
Terry from ETTERS, PA
The fan wheel had a blade break off, my bad.
I went on the site and found the part I needed and then watched the video explaining how to dismantle, replace the part, and put the dryer back together. It was easy, especially with the video instructions. Read more...

Related Maytag Dryer Parts

Back to Top