Kenmore Freezer Hoses and Tubes

Kenmore Appliance Parts

Popular Kenmore Freezer Hoses and Tubes

Your Price
$16.92
  In Stock
Kenmore Freezer Plastic Tube - 5/16 Inch
★★★★★
★★★★★
19 Reviews
PartSelect Number PS3536013
Manufacturer Part Number MJU62070602
This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser and ice maker. If you find that your current one is leaking or broken in any way, replacing the tube can fix this problem. Make sure to unplug the appliance from the power source before you start this installation project. Refer to the diagram provided by the manufacturer for further instruction and accurate guidance.
Fixes these symptoms
Installation Instructions
Debbie from FISHER, AR
Broken water line
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair. Read more...
Your Price
$10.14
  In Stock
Kenmore Freezer Ice Maker Water Fill Tube Kit
★★★★★
★★★★★
24 Reviews
PartSelect Number PS11739222
Manufacturer Part Number WP2196157
The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaking, you may need to replace the water fill tube. This water fill tube kit comes with a fill tube and a compression nut. This part is made of white plastic and is approximately 10 inches in length. The ice maker water fill tube is in the rear of the fridge. To complete this repair, you will need a 1/4 inch nut driver and a utility knife. Before beginning this repair, you may want to disconnect the water and power supply to the refrigerator.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
  • See more...
Installation Instructions
Charles from Orland Hills, IL
Broken elbow on icemaker water fill tube.
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. Read more...
Your Price
$36.12
  In Stock
Kenmore Freezer Water Tube Kit
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11730901
Manufacturer Part Number W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Ice maker not making ice
  • Leaking
  • Not dispensing water
  • See more...
Installation Instructions
Trent from Tacoma, WA
water dispenser started leaking
i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair. Read more...
Your Price
$19.22
  In Stock
Kenmore Freezer Plastic Tube
★★★★★
★★★★★
4 Reviews
PartSelect Number PS3526625
Manufacturer Part Number 5210JA3005E
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refrigerator is leaking, or it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged and use the union to attach the new water line to the old one. This tubing is an OEM part from the manufacturer.
Fixes these symptoms
Installation Instructions
Debbie from FISHER, AR
Broken water line
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair. Read more...
Your Price
$28.02
  In Stock
Kenmore Freezer Tube Assembly,Ice Water
★★★★★
★★★★★
3 Reviews
PartSelect Number PS3533046
Manufacturer Part Number AJR56656503
Fixes these symptoms
Your Price
$33.52
  In Stock
Kenmore Freezer CONNECTOR,TUBE
★★★★★
★★★★★
1 Review
PartSelect Number PS3583936
Manufacturer Part Number 4932JA3002C
Fixes these symptoms
Your Price
$13.13
  In Stock
Kenmore Freezer Compression Nut
★★★★★
★★★★★
1 Review
PartSelect Number PS11743305
Manufacturer Part Number WP627018
The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required for this repair include a pair of pliers and a socket set. Before installing this part you should take all perishable foods out of your refrigerator and store them somewhere cool, unplug the refrigerator from the power source, and shut off the water supply. This repair may require you to wear work gloves to protect your hands, and is considered an easy do-it-yourself fix.
Fixes these symptoms
Installation Instructions
harry from murfreesboro, TN
Water leaking from bottom of fridge
The line going from the ice maker fill valve ruptured and leaked water on the floor. The outlet fitting for the ice maker water inside the freezer was plugged with ice which caused the pressure to build up in the line and rupture it. The discharge tube inside was full of ice because the ice maker fill valve was old and was leaking ever so slightly. This allowed water to exit into the discharge tube gradually and build up ice to the point of blocking the discharge tube. Read more...
Your Price
$28.60
  In Stock
Kenmore Freezer Connector,Tube
PartSelect Number PS3524395
Manufacturer Part Number 4932JA3014A
Fixes these symptoms
Your Price
$57.42
  In Stock
Kenmore Freezer Water Connector - 5/16 Inch to 5/16 Inch
PartSelect Number PS1765304
Manufacturer Part Number 241806601
Fixes these symptoms
Your Price
$7.59
  In Stock
Kenmore Freezer Refrigerator Thermostat Sensor Barrier
PartSelect Number PS11739216
Manufacturer Part Number WP2196003
The thermostat sensor barrier covers and insulates the temperature control thermostat capillary tube.
Installation Instructions
Ronald from MONROE TWP, NJ
Very easy to follow.
I just did what the instructions outlined and the job was done fast. Read more...

Related Kenmore Freezer Parts