Kenmore Dishwasher Hoses and Tubes

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Dishwasher Hoses and Tubes

Your Price
$30.30
  In Stock
Dishwasher Drain Hose
★★★★★
★★★★★
(18)
PartSelect Number PS9494138
Manufacturer Part Number 807117001
If your dishwasher is leaking or not draining properly, you may need to replace the drain hose. The drain hose connects to the pump located below the lower spray arm and aids in proper dishwasher drainage. This white and black plastic hose is 7.5 feet long. For this repair, you will need either a 1/4-inch or 5/16-inch nut driver, depending on your model. You will need to remove the lower access panel on your dishwasher to complete this repair; it is often easier to remove the dishwasher from the cabinet to do so. Be sure to disconnect the dishwasher from both the power and water supply before completing this repair.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
John from Carthage, MO
Drain hose was missing
My friend bought a used dishwasher at a garage sale, the previous owner had thrown away the drain hose because it was "nasty" they said....remember it could have been cleaned. When I went to install it, I removed the old washer, and discovered that the old hose would not fit on the replacement dishwasher. I went to the local repair shop, armed with the model and serial #'s. they searched and searched their books and could not find the hose part number. they said "good luck" when I left...I went home and looked up the model on your web site, ordered the hose, and in 3 days had the dishwasher installed and running in about 30 minutes...thanks for prompt shipping.. I couldn't believe it arrived so soon...Mowerman Read more...
Your Price
$22.37
  In Stock
Drain Hose
★★★★★
★★★★★
(18)
PartSelect Number PS2358130
Manufacturer Part Number 8269144A
This drain hose is 6 and 1/2 feet.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
Jason from Lugoff, SC
Drain hose was leaking.
Switched circuit breaker off.
Removed kick panel.
Removed the dishwasher from counter.
Disconnected drain hose from the pee trap.
Disconnected drain hose from pump.
Installed new drain hose.
Reinstalled dishwasher in counter.
Connected hose at the pee trap.
Turned power back on. test for leaks by running a cycle.
Reinstalled kick panel.
Read more...
Your Price
$37.88
  In Stock
Faucet Adapter
★★★★★
★★★★★
(16)
PartSelect Number PS11751238
Manufacturer Part Number WPW10254672
The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure that it fits the coupler on your dishwasher or washer. As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This adapter is approximately 1 inch in length, and slightly less than one inch in diameter. This adapter comes with two different thicknesses of rubber washer. You will not need to use both so be sure to determine which thickness works best for your tap before installing it.
Fixes these symptoms
Installation Instructions
Stephen from Enfield, CT
faucet attachment would not sit correctly in hose connector to portable dishwasher. Received machine second hand. Could not find a replacement faucet adapter. So ordered new one and hose plus connector.
Turned machine on side. Removed two casters with Wonder Tool prybar. Then used it to remove plastic push screws holding cardboard bottom cover. Unscrewed water hose. Used screwdriver to remove clamp on drain hose. Stood machine upright, opened door. Unscrewed two screwsfrom tabs into woodblock top. Slid top forward and removed it. Cut plastic hose retainer. Removed hose assembly. Installed new hose by reversing steps. Used a new wire strap to hold hoses in place on top corner of machine. Read more...
Your Price
$47.45
  In Stock
Drain Hose
★★★★★
★★★★★
(4)
PartSelect Number PS11756139
Manufacturer Part Number WPW10545278
This part is used to drain water from your dishwasher.
Fixes these symptoms
Your Price
$48.05
  On Order
Rubber Water Delivery Tube
★★★★★
★★★★★
(19)
PartSelect Number PS11742322
Manufacturer Part Number WP4171544
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.
Fixes these symptoms
Installation Instructions
leeann from laceyville, PA
Rubber water tube had dissentagrated with age.
Since the old part had fallen off of the appliance, all I needed to do was reattach the new parts, by sliding the hose onto where the water comes through and then attach the hanger to the top rack of the dishwasher. It was very easy to do and required no tools and took about a minute to finish. Read more...
Your Price
$8.31
  In Stock
Dishwasher Water Inlet Tubing
★★★★★
★★★★★
(3)
PartSelect Number PS12746654
Manufacturer Part Number 5304523457
The tubing carries water from the water inlet valve to the tub.
Fixes these symptoms
Installation Instructions
Sandra R. from Groveland, FL
Old hose was split
The Parts finder was the big help. After that all that was needed was to loosen the clamps and replace the old hose with the new one A piece of cake. Slide the washer back into place and replace the screws that hold it to the counter. Out and back in, 30min. top end to complet the job Read more...
Your Price
$60.86
  Special Order
Feed Tube
★★★★★
★★★★★
(1)
PartSelect Number PS3492859
Manufacturer Part Number 154824201
Water is supplied to the upper arm through this tube via the pump assembly.
Fixes these symptoms
Your Price
$47.05
  In Stock
Inlet Fill Hose
★★★★★
★★★★★
(7)
PartSelect Number PS11738178
Manufacturer Part Number W10878507
This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.
Fixes these symptoms
Installation Instructions
J from HARPERSVILLE, AL
Water leak
I watched the instructional videos that showed how to replace the inlet fill hose/water inlet a couple of times. The repair was exactly as shown. No trouble at all. Read more...
Your Price
$50.02
  In Stock
Manifold
★★★★★
★★★★★
(5)
PartSelect Number PS11752851
Manufacturer Part Number WPW10323424
Also known as a water supply tube which is used for your middle spray arm.
Fixes these symptoms
Your Price
$63.68
  In Stock
HOSE
★★★★★
★★★★★
(2)
PartSelect Number PS3651318
Manufacturer Part Number W10445975
Fixes these symptoms
Installation Instructions
sharon from LAS VEGAS, NV
rat got under dishwasher and chewed water lines, grommet
saw big hole in first (main) hose - got replacement at local hardware thinking it was the only problem - it wasn't - turned on the water and noticed another leak so ordered hose from parts select - fast delivery - installed 2nd hose but still a leak so ordered grommet from parts select - again prompt delivery - installed it and voila no more leak -
also checked for rat entry points, plugged those and put down bait - bait wasn't being taken under dishwasher even tho rat reappeared so put a snap trap in back - no luck so far - teachable moment: might have been cheaper to just get another dishwasher as parts are expensive and its difficult to tell extent of damage - luckily i only needed 3 parts = $150
Read more...

Related Parts