Kenmore Dishwasher Brackets and Flanges
Find your part
Enter your model number or a part number and click "Search"
Popular Kenmore Dishwasher Brackets and Flanges
Your Price
$16.27
Mounting Bracket
PartSelect Number PS11745496
Manufacturer Part Number WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Judith from Essex, MA
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Read more...
Your Price
$7.85
Your Price
$4.27
Tine Bracket
PartSelect Number PS11770479
Manufacturer Part Number 5304506508
This bracket is designed for use in dishwashers, and it is a genuine replacement part. It is used in the upper dishrack to hold tines in place. This part is made out of plastic. Please note it is sold individually, therefore you will need to order the quantity you require. NOTE: This part has been updated by the manufacture but will still work like the original.
Your Price
$18.17
Side Mounting Bracket Kit
PartSelect Number PS1487167
Manufacturer Part Number 8212560
This mounting kit can be used on solid surface countertops.
Your Price
$8.04
Heating Element Support Bracket
PartSelect Number PS975933
Manufacturer Part Number 154465101
Sold individually.
Your Price
$20.18
Your Price
$26.31
Middle Wash Arm Tube Holder
PartSelect Number PS11741346
Manufacturer Part Number WP3378186
This holder should have a split in the ring at 3 o'clock position.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- See more...
Installation Instructions
Laura from Marietta, GA
The original, detachable hose portion developed a hole and needed replacement
Pretty simple. Hardest part was working the end clips of the slide to remove top rack. You simply need to squeeze the plastic clip in to slide it out. Once the top rack is out, it was an obvious philips head screw removal and new part replacement.
Read more...
Your Price
$28.56
Water Inlet Tube Holder
PartSelect Number PS11745473
Manufacturer Part Number WP8268843
*Part is manufactured with a split in the ring.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Timothy from Merritt Island, FL
had a broken part
The parts I ordered came in right on time and were easily replaced. Thanks.
Read more...
Your Price
$9.81
Spray Arm Tube Hanger
Under rack, align tube thru new bracket hole. Light squeeze top of new bkt.to clear wire rack. Come straight up aligning squeezed ends thru wire rack. One side at a time, keeping clips above seating area, install one side at a time with light pressure. Read more...
PartSelect Number PS11745439
Manufacturer Part Number WP8268349
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Gifford from Holyoke, MA
BOM bracket broken at bottom of alignment hole.
Remove old bracket by prying off clips on rack wires. Squeeze bracket at clips and let it drop. Under rack, align tube thru new bracket hole. Light squeeze top of new bkt.to clear wire rack. Come straight up aligning squeezed ends thru wire rack. One side at a time, keeping clips above seating area, install one side at a time with light pressure. Read more...
Your Price
$26.84
Spray Arm Feed Tube Holder
PartSelect Number PS11741382
Manufacturer Part Number WP3385160
This part holds the spray arm feed tube up.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
ken from elwood, IN
Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place.
Read more...
Related Parts
- All Kenmore Dishwasher parts
- Kenmore Dishwasher Caps and Lids
- Kenmore Dishwasher Circuit Boards and Touch Pads
- Kenmore Dishwasher Dishracks
- Kenmore Dishwasher Dispensers
- Kenmore Dishwasher Doors
- Kenmore Dishwasher Ducts and Vents
- Kenmore Dishwasher Elements and Burners
- Kenmore Dishwasher Filters
- Kenmore Dishwasher Grilles and Kickplates
- Kenmore Dishwasher Handles
- Kenmore Dishwasher Hardware
- Kenmore Dishwasher Hinges
- Kenmore Dishwasher Hoses and Tubes
- Kenmore Dishwasher Insulations
- Kenmore Dishwasher Knobs
- Kenmore Dishwasher Latches
- Kenmore Dishwasher Legs and Foots
- Kenmore Dishwasher Motors
- Kenmore Dishwasher Panels
- Kenmore Dishwasher Pumps
- Kenmore Dishwasher Racks
- Kenmore Dishwasher Seals and Gaskets
- Kenmore Dishwasher Sensors
- Kenmore Dishwasher Spray Arms
- Kenmore Dishwasher Springs and Shock Absorbers
- Kenmore Dishwasher Switches
- Kenmore Dishwasher Thermostats
- Kenmore Dishwasher Timers
- Kenmore Dishwasher Valves
- Kenmore Dishwasher Wheels and Rollers
- Kenmore Dishwasher Wire Plugs and Connectors