Kenmore Dishwasher Switches

Popular Kenmore Dishwasher Switches

Your Price
$44.59
  In Stock
Kenmore Dishwasher Drain Solenoid and Bracket Assembly
★★★★★
★★★★★
11 Reviews
PartSelect Number PS1481923
Manufacturer Part Number WD21X10268
This valve opens in order for the water to drain out of the dishwasher.
Fixes these symptoms
Installation Instructions
Hector from West Melbourne, FL
Dishwasher water will not drain.
Very easy about 5 min replacement, Checked electrical conductivity to verify I had a bad solinoid, after I received the new part. I removed and replaced part by only removing and re-installed 2 screws and spring. Dishwasher worked like new. Read more...
Your Price
$27.42
  In Stock
Kenmore Dishwasher Interlock Switch
★★★★★
★★★★★
18 Reviews
PartSelect Number PS1481922
Manufacturer Part Number WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Will Not Start
  • Won’t Start
  • See more...
Installation Instructions
Steven from EPHRATA, WA
interlock switch was bad. Prevents the dishwasher form running as it "thinks" the door is still open.
Opened door, removed screw holding down metal plate that presses against interlock switch when door is closed. Removed plastic cover thingy that is over interlock switches. Removed the interlock switch by pressing the plastic lock thingy away from switch. Pulled the wires off each end of the interlock switch. Removed new interlock switch from plastic bag and reversed above procedure. Done, shut door and the dishwasher works. Read more...
Your Price
$47.54
  In Stock
Kenmore Dishwasher Overfill Control Switch
★★★★★
★★★★★
6 Reviews
PartSelect Number PS11750031
Manufacturer Part Number WPW10195039
This part is also known as a float switch. This float switch, when activated, stops the flow of water into the dishwasher.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
Dennis from AUBURNDALE, WI
water fill overflows at times
thought it could be due to the overfill control switch,so ordered one and replaced one in the washer. However, it did not solve the problem. Having a repair company coming to look at the dishwasher. Tipped the washer on its back and switch was readily accessable. Only had to open plastic covering over the switch, disconnect the wires and install new switch and reconnect the wires. Read more...
Your Price
$48.00
  In Stock
Kenmore Dishwasher Float Switch
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3492842
Manufacturer Part Number 154773201
Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
  • Leaking
  • Not draining
  • Will not fill with water
  • See more...
Installation Instructions
steve from virginia beach, VA
No water to dish washer
After figuring out the problem wasn't the water inlet switch, I replaced the switch assembly for the water level float. Cut off supply water to dishwasher, removed the 2 screws holding switch assembly, and installed new switch. 15 minutes, very easy job. Read more...
Your Price
$30.54
  In Stock
Kenmore Dishwasher Door Switch
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11745501
Manufacturer Part Number WP8269209
This dishwasher door switch will shut your dishwasher off when the door is opened.
Fixes these symptoms
Installation Instructions
mike from lockport, NY
dishwasher quit halfway thru a wash cycle
first I noticed that the dishwasher wasn't making any noise. Then I saw that there were no lights on the control panel. I opened the door and found water dripping off everything... I closed the door and tried hitting every button I could see, nothing happened. I checked the breaker, it was ok, and since I did all the wiring myself, I knew that was ok too. So I pulled off the upper panel of the front door and got out the electrical schematic that came with the washer.
first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO...
Read more...
Your Price
$31.41
  In Stock
Kenmore Dishwasher SWITCH
★★★★★
★★★★★
1 Review
PartSelect Number PS8727333
Manufacturer Part Number 00611295
Fixes these symptoms
Installation Instructions
Richard from MONTROSE, CO
On/Off button not working properly
Turned power off, disconnected plug from switch, R&R switch, reconnected plug and restored power Read more...
Your Price
$7.50
  In Stock
Kenmore Dishwasher Float Switch
PartSelect Number PS260235
Manufacturer Part Number WD21X479
Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
Your Price
$27.63
  In Stock
Kenmore Dishwasher Float Switch
PartSelect Number PS8697040
Manufacturer Part Number 00165256
Fixes these symptoms
Installation Instructions
Ranaye from BECKER, MN
Not getting water
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done Read more...
Your Price
$95.01
  In Stock
Kenmore Dishwasher Float Switch Kit
★★★★★
★★★★★
3 Reviews
PartSelect Number PS557009
Manufacturer Part Number 8193506
This kit includes the switch, lever, seal and standpipe. Water that fills your dishwasher lifts the float, and when it reaches a certain level, the float acts as a trigger for the float switch. The float triggers the switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
  • Leaking
  • Not draining
  • Will not fill with water
  • See more...
Installation Instructions
Robert from Rochester, NY
Dishwasher leaked under right front corner. Discovered that overflow(float switch) was either sticking allowing fill to overflow or rubber gasket was deteriorated allowing water to leak through mounting hole.
Removed mushroom shaped float cover by simply pulling up. Cover simply slide down into switch which is mounted through the floor of the tub. Using an adjustable wrench loosened and removed plastic fastening nut allowing removal of switch assembly from below. Disconnected two wires from switch and attached replacement assembly, reinserted in mounting hole, reattached nut from top, reinserted float cap and job done! The only tricky part is that the switch needs to be mounted inside assembly, wires connected and snapped shut before reinserting. Not difficult once you figure it out, Also need to make sure rubber washer is inserted on the overflow tube before reinstalling. Keep track as you remove and simply reverse the order. Tried to obtain part locally and was told it would be 6-10 days before delivery. Order from Part select arrived in 2 days. Read more...
Your Price
$57.25
  In Stock
Kenmore Dishwasher On/Off Push Button Switch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS8713809
Manufacturer Part Number 00424410
Fixes these symptoms

Related Kenmore Dishwasher Parts