Kenmore Dishwasher Sensors

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Dishwasher Sensors

Your Price
$26.86
  In Stock
Turbidity Sensor
★★★★★
★★★★★
(3)
PartSelect Number PS11757214
Manufacturer Part Number WPW10705575
Measures level of soil in the water.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...
Installation Instructions
Mark from Lancaster, NY
Failed diagonistics test for OWI sensor
Pulled the dishwasher out from the counter, on the lower right hand side, about mid way back there is a bundle of all yellow wires, follow that to the sensor which mounts into the bottom of the wash tub. The sensor is easily removed by grasping it by hand and turn it about a half turn (can't remember which direction). It then just pulls out. Disconnect the wire bundle by pushing on the retaining clip and the install is the reverse. Read more...
Your Price
$30.94
  In Stock
SENSOR
PartSelect Number PS8727345
Manufacturer Part Number 00611323
Installation Instructions
Daniel from AUBURN, IN
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find. Read more...
Your Price
$44.22
  On Order
Turbidity Sensor
PartSelect Number PS2363559
Manufacturer Part Number 154762601
Your Price
$120.52
  In Stock
Turbidity Sensor
PartSelect Number PS816014
Manufacturer Part Number 154473901
The sensor measures level of soil in the water and the thermistor is used to regulate water temperature when certain cycles or options are selected.
Fixes these symptoms
Your Price
$34.87
  In Stock
SENSOR
PartSelect Number PS12070543
Manufacturer Part Number W11084121
Your Price
$85.54
  In Stock
Dishwasher Thermistor
PartSelect Number PS11745500
Manufacturer Part Number WP8269208
This part is used to regulate water temperature when certain cycles or options are selected. The thermistor is part of the sensor mounted in the tub.
Fixes these symptoms
  • Not cleaning dishes properly
  • Will Not Start
  • See more...
Installation Instructions
Deb from LaPorte, IN
Stopped Running,Will Not Start, and Clean LED Blinks 7 times then repeats
Got Maintenance Flyer out an read about problem
Removed access plate
Disconnectd water and drain
Removed anchor screws
Pulled unit out and disconnedted from Electric
Flipped on it's back
Ohmed out all heat related items and found discrepency with Thermisitor resistance
Ordered and received Part
Changed out Thermisitor
Checked wiring to Heater and replaced connections
Hooked electric up
Ran Diognostics per Maintenance flyer and cleared fault
Hooked back up and ran like a champ

The reason it took so long is because I put the old thermisitor back in and tryed to run the diognostics just to make sure that was the problem
Read more...
Your Price
$19.16
  In Stock
SENSOR
PartSelect Number PS8727335
Manufacturer Part Number 00611312
Your Price
$20.28
  In Stock
SENSOR
PartSelect Number PS8727394
Manufacturer Part Number 00611574
Your Price
$43.94
  In Stock
Turbidity Sensor
PartSelect Number PS8697053
Manufacturer Part Number 00165279
Your Price
$35.48
  In Stock
SENSOR
PartSelect Number PS8727445
Manufacturer Part Number 00611912

Related Parts