Kenmore Dishwasher Drawers and Glides

Videos!

Your Price

$16.07

Kenmore Dishwasher Upper Dishrack Slide

★★★★★

1 Review

PartSelect Number PS1525080

Manufacturer Part Number 154597801

This is an upper dishrack slide for your dishwasher. It is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack. The mounting screws are not included in this purchase and can be found in the related parts section below. You should purchase a new dishrack slide if your current one has been warped or damaged over time.

Installation Instructions

Terry from Pleasant View, UT

Top rack was dropping out of rollers/Slides

This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket Read more...

Your Price

$128.66

Kenmore Dishwasher Rail Assembly

PartSelect Number PS12742478

Manufacturer Part Number AHC73575003

This dishwasher rail assembly is a precision-engineered component designed to support the smooth and stable movement of the dishwasher rack during loading and unloading. Constructed from durable materials, it provides a reliable track that prevents misalignment, sagging, or binding, helping to maintain the overall integrity and performance of the appliance. By ensuring proper alignment and weight distribution, the rail assembly protects both the rack and internal components from damage caused by uneven movement. This genuine OEM part is compatible with select LG dishwasher models and is essential for restoring smooth operation when the original rail becomes worn or damaged. Installation is straightforward and helps extend the life of the appliance.

Videos!

Your Price

$62.60

Kenmore Dishwasher Upper Rack Slide

PartSelect Number PS261576

Manufacturer Part Number WD30X98

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.

Installation Instructions

Dave from Littleton, CO

Parts were old and worn out

The repair was easy. A couple turns of a screwdriver was all that was necessary to remove the rollers and slide assembly. The I simple installed the new rollers. Slid the slide into place between the rollers and then added the back caps to the slide. Replaced the rack rollers on the top basket and then slid it into position between the new slides. Once in place, I attached the end caps to the front of the slide. Simple and quick. Read more...