EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

General Electric Dishwasher Sensors

Popular General Electric Dishwasher Sensors

Your Price
$40.41
  In Stock
General Electric Dishwasher Pressure Sensor Asm
★★★★★
★★★★★
3 Reviews
PartSelect Number PS12741258
Manufacturer Part Number WD21X25468
This is a manufacturer-built pressure sensor for dishwashers. This pressure sensor, also known as a pressure switch, is designed to monitor the water pressure, communicate with the control board of the dishwasher, and accurately calculate the necessary amount of water for the washing cycle. If this pressure sensor is bad or not working properly, it will cause over and underfilling of your dishwasher, as well as excessive noise while in operation. To replace this pressure sensor, you will need a screwdriver and wrench to gain access and remove this part, and further disassembly of your dishwasher may be required. This sensor is sold individually and does not come with any other parts.
Fixes these symptoms
  • Leaking
  • Not draining
  • Will not fill with water
  • See more...
Installation Instructions
Linda from MYRTLE BEACH, SC
Dishwasher would not fill with water and would shut off
I found it online! There were step by step instructions that were easy to understand. I have never had to do anything like this in my life, only recently had to start doing everything around the house myself due to husband's illness.
The repairman came out, charged me $100 to determine what the dishwasher needed & left me with the part number. He was going to charge me $389 to install the part and they were over charging for the part. The repairman suggested I just get a new dishwasher.
I ordered the part from the website at 1/2 the price that the other place charges and found it on line. With the step by step instructions and the online page, I successfully installed it MYSELF. Saved me a ton of $$.
I LOVE the website
Thank You!!!!
Read more...
Your Price
$42.06
  In Stock
General Electric Dishwasher Sensor Turbidity Assembly
PartSelect Number PS11762982
Manufacturer Part Number WD21X22830
Introducing the GE Turbidity Sensor, an integral dishwasher component designed to keep your dishes sparkling clean. This soil sensor operates by detecting the soil level in your dishwasher's water and communicates this information to the control board. As a safety precaution, always disconnect your dishwasher or turn off the house circuit breaker before initiating installation. It's recommended to wear protective gloves during this process to safeguard your hands. Prioritize efficiency and cleanliness with this top-notch GE dishwasher sensor. Don't settle for less; optimize your dishwasher's performance with GE's commitment to quality and innovation.
Fixes these symptoms
Your Price
$28.97
  On Order
General Electric Dishwasher Turbidity Sensor
★★★★★
★★★★★
1 Review
PartSelect Number PS16618965
Manufacturer Part Number WD21X29818
Your Price
$21.78
  In Stock
General Electric Dishwasher Thermistor
PartSelect Number PS16554638
Manufacturer Part Number WD21X28958
Your Price
$20.37
  Special Order
General Electric Dishwasher Leak Sensor Pan
PartSelect Number PS8769900
Manufacturer Part Number WD21X20552
Installation Instructions
Eddy from MALIBU, CA
My Dishwasher goit damages from broken glass jam pump and clogged drain
Work done"
used wet vacuum to remove all water and debris from inside out side dishwasher, used we vacuum to unclog drain, Disconnected drain hose, unplug power cord, water supply line, removed dishwasher, swap all new parts, reconnected everything and done in a zap,

thank you
Read more...
Your Price
$22.96
  In Stock
General Electric Dishwasher Thermistor Asm
PartSelect Number PS16542461
Manufacturer Part Number WD21X27707
Your Price
$49.55
  On Order
General Electric Dishwasher Turbidity Sensor
PartSelect Number PS12582726
Manufacturer Part Number WD21X24700
Your Price
$35.80
  Special Order
General Electric Dishwasher Sensor Turbidity Assembly
PartSelect Number PS7783361
Manufacturer Part Number WD21X10494
Installation Instructions
Gary D. from ALBUQUERQUE, NM
The GE Cafe series Dishwasher not drying dishes.
I pulled the dish washer out and, make sure you turn off the power, disconnect the water and drain line. un screw the mounting screws.
The first thing i checked was the drain filter which was clogged. I took shop vac and sucked all the excess water out and removed the flood switch. seemed ok but you can't tell if its ok, so just replace it. I then removed the door from the unit. I needed to replace the dispenser. After the door was off I tilted the machine forward, to check the heater. I pulled the quick connects off and checked the resistance across the heater, should be 16 ohms mine was 16.3 so heater not bad. looking at the bottom of the machine, follow the left hand wire and it will attach to a thermal overload. (a small round disc which is not listed in the parts manuals ), I checked for continuity across the switch it was open.
On this model GE the switch is resettable, a small reset button in the middle of the overload. I reset it and continuity was restored. only three things might cause this to kick. one the flood switch, the vent fan or the turbidity sensor. I replaced all three and the machine is working great.
If you have replaced your heater and still doesn't heat, try resetting that switch. and give GE a big thank you for not telling any one about the switch.
A big thank you to PartSelect for having all the correct replacement parts.
Read more...
Your Price
$378.15
  Special Order
General Electric Dishwasher Pressure Sensor.
PartSelect Number PS11762969
Manufacturer Part Number WD21X21597
PRESSURE SENSOR
Your Price
$100.27
  Special Order
General Electric Dishwasher Turbidity Sensor.
PartSelect Number PS11762970
Manufacturer Part Number WD21X21611
TURBIDITY SENSOR

Related General Electric Dishwasher Parts