General Electric Dishwasher Caps and Lids

General Electric Appliance Parts
Shop By Part Type

Popular General Electric Dishwasher Caps and Lids

Your Price
$6.13
  In Stock
Rinse Aid Cap
★★★★★
★★★★★
(20)
PartSelect Number PS958932
Manufacturer Part Number WD12X10122
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Will not dispense detergent
  • See more...
Installation Instructions
Greg from Doon, IA
cap was melted
replaced it Read more...
Your Price
$10.75
  In Stock
Rinse Cap Assembly
★★★★★
★★★★★
(12)
PartSelect Number PS1019466
Manufacturer Part Number WD12X10206
This is the replacement rinse cap assembly for your dishwasher. It is made of gray plastic and is approximately 1 ½ inches in diameter. This rinse cap screws into the rinse aid assembly and prevents leaks. Sometimes the cap can become loose and fall out, which can cause it to be melted by the heater. If your cap is damaged or missing, this is the part you will need to replace it. This rinse cap is an authentic OEM part sourced directly from the manufacturer and is sold individually.
Fixes these symptoms
Installation Instructions
Antoinette from Sun Lakes, AZ
We were going to buy a new dishwasher because of rusted bottom rack, dishes not cleaning well and glasses covered with gritty grime.
Once the rinse cap was renewed everything came out looking better. We cleaned the machine with Lemi-Shine, which really helped all the calcium deposits that were adding clog to the machine. The new lower rack and basket are great and make the 5 year old dishwasher look like new. Great experience from ordering parts to receiving them. 100% satisfied and the price was GREAT! Read more...
Your Price
$4.10
  In Stock
Interlock Cover
★★★★★
★★★★★
(3)
PartSelect Number PS8756214
Manufacturer Part Number WD12X10401
This is a replacement interlock cover for your dishwasher. The interlock cover protects the door latch assembly, and prevents some of the smaller more important parts from being damaged or going missing. This part is made of gray plastic and is approximately 3.5 inches by 1.5 inches. To replace the interlock cover, you will have to use a Phillips-head screwdriver to separate the inner door panel from the outer door panel. At this point you can access and replace the interlock cover, which simply snaps in and out of place. This part is sold individually.
Fixes these symptoms
Installation Instructions
JAMES from MAYFIELD, UT
Cover, Interlock Heats Ups And Bends Causing Switch Problems
Ordered your new and improved interlock cover made with better plastic (thank you). Your new spring is also better. It's bigger and longer and is now the right size. (Thank you). Your parts are better than oem. The interlock is easy to get to. The oem one is black and you can see that it is bulged. The replacement one is gray speckled with white and black. You can see the improvement by just making a comparison. Just unclip the old one and clip in the new one. . Repace panel cover. Now it works and should work now for many a year. Thanks! Parts select. Read more...
Your Price
$3.14
  In Stock
COVER ROLLER
PartSelect Number PS8756262
Manufacturer Part Number WD12X20161
Your Price
$2.17
  In Stock
RACK SLIDE END CAP
★★★★★
★★★★★
(2)
PartSelect Number PS3506781
Manufacturer Part Number WD12X10371
Your Price
$6.87
  In Stock
COVER JUNCTION BOX
★★★★★
★★★★★
(1)
PartSelect Number PS259256
Manufacturer Part Number WD12X448
Your Price
$2.65
  In Stock
Guide Rail End Cap - White
PartSelect Number PS958978
Manufacturer Part Number WD12X10176
Rinse Aid Fill Cap
PartSelect Number PS2351824
Manufacturer Part Number WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
COVER ROLLER
PartSelect Number PS8756261
Manufacturer Part Number WD12X20160
COVER ROLLER Right Hand
PartSelect Number PS8756232
Manufacturer Part Number WD12X10438
This part is the replacement roller cover for your dishwasher. It is made of black plastic and is approximately 5 inches by 2 inches. The cover protects the rollers on the dish rack that allow the rack to slide in and out efficiently. The main reason you would need to replace the roller cover is if it is cracked or damaged. This is an authentic OEM part sourced directly from the manufacturer and it is sold individually.

Related Parts