Frigidaire Refrigerator Drawers and Glides

Crisper Cover Support - Front

★★★★★

★★★★★

(63)

This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.

Drawer Support Rail - Right Side

★★★★★

★★★★★

(104)

This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.

Refrigerator Crisper Pan

★★★★★

★★★★★

(23)

This manufacturer-certified Refrigerator Crisper Pan is a clear plastic pan which easily inserts into your fridge's crisper area in order to hold items. In some models of refrigerator this model is the same pan for both the meat and vegetable bins, but please note that this part is sold individually and not part of a complete kit. If broken then the part should be replaced. Refer to your user manual and model number to see if this crisper is right for your fridge. This bin measures approximately 11 inches deep and 22 inches long.

Crisper Glass Shelf Insert

★★★★★

★★★★★

(43)

Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.

Refrigerator Crisper Drawer

★★★★★

★★★★★

(24)

This part is compatible with models including; FRS6LF7JW2,FRS6LF7JW0,CRSE264JQ1,FRS6LF7JW6,CRSE264JQ0,FRS6LF7JW5,FRS6LF7JW3,25353624303,25353624300,25353624301,25353624302,WRS6W1EW8,WRS6W1EW9,WRS6W1EW6,WRS6W1EW7,FRS6R3JW6,WRS6W1EW4,FRS6R3JW5,WRS6W1EW5,WRS6W1EW2,FRS6R3JW7,FRS26KF5CS0,FRS6R3JW2,WRS6W1EW0,FRS6R3JW1,WRS6W1EW1,FRS26KF5CS2,FRS6R3JW4,25356524403,FRS6R3JW3,FRS6R3JW0,25356524400,25356524401,FSC23F7FSB0,FLS26Z2GKB3,FLS26Z2GKB2,FLS26Z2GKB1,FLS26Z2GKB0,25353612303,25353612302,FRS26R2AW9 This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 240351003,240351005,240351010,240351013,240351019,240351024,240351020,240351022,240351023,240351057,240351052,240351063,240351007,240351006,240351031,240351011,240351016,240351048,240351049,240351026,240351027,240351030,240351029,240351042,240351044,7240351049,240351054,240351062,240351028,240351040,240351018,240351041,240351009,240351021,240351037,240351045,240351056 Genuine Original Equipment Manufacturer (OEM) part. Crisper drawer 240351061 is an original equipment manufacturer (OEM) part that fits some side-by-side refrigerators in these series: Kenmore 253; Frigidaire BGHS, DG, FF, FG, FP, FRS, LFUS and LGH; and Crosley CRSH This crisper drawer features a humidity slide control that lets you adjust the humidity in the drawer

Drawer Support Rail - Left Side

★★★★★

★★★★★

(36)

This drawer rail supports the left hand side of the sliding drawer.

Upper Crisper Drawer Cover - Glass NOT Included

★★★★★

★★★★★

(33)

This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace this part, lift out the glass cover and snap out the drawer frame. Snap this new frame cover into place and replace the glass.

Meat Drawer Rail - Right Side

★★★★★

★★★★★

(40)

As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out over time. The only tool required is a Phillips screwdriver. Empty out the drawer and remove it by sliding it forward. Lift out the shelf, remove the screw on the side of the shelf, remove the rail by pushing the rail forward and snapping out of place, insert new rail, and install the screw back in. Now the shelf can be put back into the refrigerator. The mounting screws are sold separately.

Refrigerator Crisper Drawer Cover

★★★★★

★★★★★

(22)

Crisper Drawer Cover - NO Glass

★★★★★

★★★★★

(18)

This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.