Frigidaire Refrigerator Wheels and Rollers

Your Price

$12.85

Frigidaire Refrigerator Roller

★★★★★

3 Reviews

PartSelect Number PS12071116

Manufacturer Part Number 5304508016

This crisper pan roller is sourced directly from the manufacturer for use in your refrigerator. It is a genuine OEM part that is designed to fit just like the original for your convenience. The roller is a plastic wheel-like component that attached to the sides of the crisper pan and allows it slide in and out of the refrigerator smoothly. The rollers allow users to easily and conveniently access the contents of the drawers. Over time, the roller may wear down, break, or fall off. If the roller is faulty, you may notice difficulty sliding the drawer in and out, or the drawer may feel loose and unstable when you pull it out. Each crisper pan roller is sold individually. Ensure that you order the correct number of rollers for your refrigerator.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

hellen from SPRINGFIELD, MO

Roller screw recipients broke out. Can't be repaired.

Was not able to repair. Wasn't rollers I needed. Plastic screw recipients in front on frame had broken out so rollers weren't the problem. Tried gluing back pieces to no avail. Crisper frames are poorly designed. Read more...

Your Price

$7.64

Frigidaire Refrigerator Upper Wheel And Bushing Assembly (black)

★★★★★

2 Reviews

PartSelect Number PS17219660

Manufacturer Part Number 5304535381

The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely of plastic, and are white in color. The purpose of these parts is to allow your dishrack to roll easily on the support rails. This kit is sold individually and contains only one wheel and one axle. Please order the required quantity for your repair. If your dishrack is having trouble rolling in and out you may need replace your rollers and axles.

Installation Instructions

Terry from Pleasant View, UT

Top rack was dropping out of rollers/Slides

This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket Read more...

Videos!

Your Price

$11.77

Frigidaire Refrigerator Wheel & Bushing Assembly

★★★★★

25 Reviews

PartSelect Number PS16745479

Manufacturer Part Number 5304532229

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.

Fixes these symptoms

Noisy
Not cleaning dishes properly
See more...

Installation Instructions

CHRIS from ROANOKE, VA

Water leaking from Inlet Valve

Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring. Read more...

Videos!

Your Price

$26.82

Frigidaire Refrigerator Roller Tub Gray

★★★★★

2 Reviews

PartSelect Number PS11770690

Manufacturer Part Number 5304507405

Sold individually. Grey in color.

Installation Instructions

Terry from Pleasant View, UT

Top rack was dropping out of rollers/Slides

This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket Read more...

Your Price

$30.53

Frigidaire Refrigerator Crisper Drawer Roller

★★★★★

1 Review

PartSelect Number PS7321350

Manufacturer Part Number 242236801

Sold individually.

Your Price

$37.51

Frigidaire Refrigerator Drawer Wheel Support

PartSelect Number PS2350567

Manufacturer Part Number 241770301

Fixes these symptoms

Door won’t open or close
See more...

Your Price

$41.07

Frigidaire Refrigerator Leveler Assembly

PartSelect Number PS16218725

Manufacturer Part Number 5304525230

Presenting the genuine OEM LEVELER ASSEMBLY, precisely designed for certain models of the acclaimed brand, Frigidaire. This key component acts as a sturdy support for your freezer, maintaining balance and function. The adjustability of the height of this leveling leg provides flexibility in installation to ensure your freezer stands level, promoting optimal operation. Keep in mind, it is crucial to confirm the agreement of this part with your model prior to purchasing. Installation of this crucial part is a smooth process but we recommend wearing work gloves for added safety. Inject the peace of performance-enhancement into your appliance with this Frigidaire LEVELER ASSEMBLY.

Videos!

Your Price

$43.61

Frigidaire Refrigerator Roller Assembly

PartSelect Number PS11723468

Manufacturer Part Number 5304499445

This refrigerator front roller assembly is designed to support the appliance and allow it to move smoothly for cleaning, maintenance, or repositioning. Built from durable metal and heavy-duty plastic, it provides stable support while helping keep the unit level for proper door alignment and operation. Measuring approximately 8.2 inches long, 6.4 inches wide, and 5.45 inches high, and weighing just under 1 lb, it offers a reliable solution for restoring easy mobility and stability to your refrigerator.