EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Frigidaire Refrigerator Hardware

Popular Frigidaire Refrigerator Hardware

To secure a refrigerator or freezer door handle to the door, this OEM kit includes four #10-16 screws. Each is 0.500 in. long and has a Phillips or square drive. Confirm compatibility with your appliance before buying.
To secure a refrigerator or freezer door handle to the door, this OEM kit includes four #10-16 screws. Each is 0.500 in. long and has a Phillips or square drive. Confirm compatibility with your appliance before buying.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from you

Respectfully

Roy
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.
What this part fixes:
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
Installation Instructions
Dennis from Tryon, NC
Water leaking under the dishwasher
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
Wire shelves in refrigerators and freezers are supported by clips. This white, right-hand OEM clip supports a shelf. Check your appliance model to confirm fit.
Wire shelves in refrigerators and freezers are supported by clips. This white, right-hand OEM clip supports a shelf. Check your appliance model to confirm fit.
Installation Instructions
Mary from DAYTON, OH
Bought a new upright freezer. Love it but I made sure to get a model that has options to adjust the shelves. Then I bought a new shelf with clips. I felt there was too much room between the shelves as it came from the store. That would just result in stacking packages and too easy to lose what wa
I just moved the middle shelves up and down to create enough space for another shelf. Worked out beautifully
$7.65
In Stock
A refrigerator’s wire shelf relies on this clip for support on the left side. Confirm compatibility using your refrigerator’s model number. It is an OEM part.
A refrigerator’s wire shelf relies on this clip for support on the left side. Confirm compatibility using your refrigerator’s model number. It is an OEM part.
Installation Instructions
Mary from DAYTON, OH
Bought a new upright freezer. Love it but I made sure to get a model that has options to adjust the shelves. Then I bought a new shelf with clips. I felt there was too much room between the shelves as it came from the store. That would just result in stacking packages and too easy to lose what wa
I just moved the middle shelves up and down to create enough space for another shelf. Worked out beautifully
This metal shoulder screw secures a refrigerator or freezer door handle to the outer door panel. It is a number 10 AB handle mounting screw and is sold individually. A missing screw, damaged threads, or a worn screw head may leave the handle loose or prevent it from attaching securely. Check the handle and mounting point for damage before replacing the screw, since either can also cause movement. Confirm the correct fastening location in the appliance parts diagram before installation. This is an OEM part sourced directly from the manufacturer.
This metal shoulder screw secures a refrigerator or freezer door handle to the outer door panel. It is a number 10 AB handle mounting screw and is sold individually. A missing screw, damaged threads, or a worn screw head may leave the handle loose or prevent it from attaching securely. Check the handle and mounting point for damage before replacing the screw, since either can also cause movement. Confirm the correct fastening location in the appliance parts diagram before installation. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Charles from ALBUQUERQUE, NM
Install missing door handles on new refrigerator
Read instructions!
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

A refrigerator or freezer door handle is held in place by this screw. The OEM part has a #10-16 thread, a 1/2-inch length, and a Phillips/Square drive. Confirm it matches your appliance before ordering.
A refrigerator or freezer door handle is held in place by this screw. The OEM part has a #10-16 thread, a 1/2-inch length, and a Phillips/Square drive. Confirm it matches your appliance before ordering.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from you

Respectfully

Roy
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
What this part fixes:
  • Frost buildup
Installation Instructions
Michael from Milan, TN
Old panel lid broken and brittle
Removed lid and placed upside down on floor. Pulled plastic retainer clips and removed gasket. Removed old panel. Repositioned new panel and reversed assembly.

Ordered only one spare plastic clip. Too expensive to invest in more. Luckly only broke one of the old clips.

Carefully pulled clips with small claw hammer.
$7.65
In Stock
For a refrigerator or freezer, check the appliance model to confirm this OEM screw is the right one. It has an M5 thread, is 16 mm long, and has a quad-drive hex washer head.
For a refrigerator or freezer, check the appliance model to confirm this OEM screw is the right one. It has an M5 thread, is 16 mm long, and has a quad-drive hex washer head.
This nylon door hinge washer supports the refrigerator door as it pivots on the hinge pin and helps reduce friction between adjoining parts. A worn, damaged, or missing washer may affect door alignment or contribute to squeaking and uneven movement. Inspect the washer and surrounding hinge components if the door sags, rubs, or no longer closes smoothly, since other faults can cause similar symptoms. Match the washer to its position in the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
This nylon door hinge washer supports the refrigerator door as it pivots on the hinge pin and helps reduce friction between adjoining parts. A worn, damaged, or missing washer may affect door alignment or contribute to squeaking and uneven movement. Inspect the washer and surrounding hinge components if the door sags, rubs, or no longer closes smoothly, since other faults can cause similar symptoms. Match the washer to its position in the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Door Sweating
  • Door won’t open or close
Installation Instructions
Patrick from Hollis, ME
refrig. door fell off lower hinge
took door off to see damage / what caused it . put door back on with temporary fix. /
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.
A securely attached freezer basket slides more evenly and keeps stored food accessible. This white plastic basket slide clip connects the basket to its slide rail, helping hold it in place as it moves in and out. Cracks, broken tabs, or a missing clip may allow the basket to shift, tilt, or pull away from the slide. Replacing a damaged clip restores the attachment and helps keep the basket aligned during use. The clip snaps into place without tools for a straightforward replacement. This is an OEM part sourced directly from the manufacturer.
A securely attached freezer basket slides more evenly and keeps stored food accessible. This white plastic basket slide clip connects the basket to its slide rail, helping hold it in place as it moves in and out. Cracks, broken tabs, or a missing clip may allow the basket to shift, tilt, or pull away from the slide. Replacing a damaged clip restores the attachment and helps keep the basket aligned during use. The clip snaps into place without tools for a straightforward replacement. This is an OEM part sourced directly from the manufacturer.

More Frigidaire Refrigerator Parts

People often need to fix these common parts