Amana Refrigerator Lights and Bulbs

Your Price

$7.32

Light Bulb - 40W

★★★★★

(58)

PartSelect Number PS884734

Manufacturer Part Number 8009

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.

Installation Instructions

judie from mays landing, NJ

interior drawers were off their rollers

pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own. Read more...

Your Price

$12.63

Light Bulb - 120V 25W

★★★★★

(9)

PartSelect Number PS11747806

Manufacturer Part Number WPA3073101

This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.

Installation Instructions

Arau from Haverhill, MA

The door was crocked and wouldn't shut properly

Everything was easy. I read one of your other reviews and it gave me the confidence to try it myself. First i toke off the cap at the top of the door then the three screws. I lifted the door off so i could be sure the cam was my only problem then put the door back on. That took 5 mins. Then I got on the computer and ordered the parts i needed. Two days later the parts arrived and and i took the door off again. Then put the new cam on, applied a litle vasiline, put the door back on and forgot that i ever had a problem. Thanks for the help. Doug Arau Read more...

Your Price

$15.16

Light Bulb - 10W

★★★★★

(16)

PartSelect Number PS11739347

Manufacturer Part Number WP22002263

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Installation Instructions

Edward from Andover, NJ

Dryer was sqeaking loudly when running

I Looked on internet sites for this type of problem.
Most sites said the support rollers could cause this.
I found your site PartSelect and with help of your diagrams of the machine ordered the parts I thought were needed plus other parts that might cause the problem.
With machine torn down I replaced the rollers.
I had also ordered the main drive belt and idler assembly with the rollers and these also needed replacement. It is a good idea to order other suspect parts when doing this type of repair since you can return the parts not needed.
Your return policy is great.

Edward Brennan Read more...

Your Price

$16.45

BULB-LIGHT

★★★★★

(17)

PartSelect Number PS11775242

Manufacturer Part Number W11043014

Installation Instructions

Frances from TUNNEL HILL, GA

The light was blown

I turned the light bulb into the socket Read more...

Your Price

$50.99

Light Socket Kit

★★★★★

(6)

PartSelect Number PS371236

Manufacturer Part Number 4387478

The light socket in your refrigerator houses the light bulb and connects it to the power source. If your refrigerator light is not coming on when you open the door, you may need to replace the light socket. Before you replace the light socket, be sure that your light bulb is in working condition, as this may solve the same problem. This light socket kit comes with 2 wire connectors, a light shield, and the new socket. The wire connectors that come with this kit are included so your new socket can replace a variety of old ones. If this light socket is different than your original, you will need to use the connectors to make it fit your refrigerator. Be sure to follow the instructions provided, so this part will fit your refrigerator properly.

Fixes these symptoms

Light not working
See more...

Installation Instructions

DANIEL from MINNEAPOLIS, MN

Light Would Not Go On In The Refrigerator

First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered a replacement socket kit from Partselect. When the new one arrived, I reconnected the lead wires to it, snapped it back into its hole, screwed in a new lightbulb, and presto!! The light was back on with no further problem. Thank you, Partselect!! A $15.00 part saved me what probably would have been at least a $100. service call and heaven knows what the technician would have told me I needed!!! Read more...

Your Price

$11.08

Light Bulb - 7W

★★★★★

(5)

PartSelect Number PS11731356

Manufacturer Part Number W10857122

Sold individually. This bulb is a 7-watt appliance incandescent light bulb. This appliance light bulb is two inches long. It is used for many clothes dryers. You will need a Phillips screwdriver and needle-nose pliers. Unplug the power from your dryer. You will find the light bulb by opening your dryer door and locating the casing surrounding the bulb on the top of the inside of the door. You will need to remove the single screw holding it in place to access the bulb. Twist the old bulb out of place. Use your pliers if the base of the bulb is still inside the socket once the glass part of the bulb has been removed. Check to make sure that the socket itself is not damaged. If the socket is damaged it will need to be replaced as well. Screw your new bulb into place.

Installation Instructions

Mark from West Chester, PA

Timer won't advance for auto-sensing cycles. Low Heat.

First I unplugged the dryer from the wall outlet. Then, removed the access panel in the lower front (held on by 2 screws near the floor). Then, I removed the black plastic air duct (held by 3 screws) in front of the blower. Then, with a Sharpie marker, next to each wire terminal lug, I labeled on the chassis the COLOR of each wire where it plugs on to a terminal lug (for proper wiring re-assembly later). Then, thru the lower front, I reached into the lower left rear of the dryer to remove the heating element assembly from its metal duct (held by 3 or 4 screws) - it slides down a bit, then it is easily removable. I layed the element on the floor in front of the dryer - all wiring still intact. Then, using the NEW HEATING ELEMENT and SENSORS ordered, I assembled them to match the original, re-using screws off of the old unit - and moving the wiring one-by-one from the original to the new assembly. I then installed the new heating element assembly into the duct at the lower rear of the dryer. I then replaced the 2 sensors on the front metal panel of blower housing, with new parts from my order, re-using the original wiring and screws. Then I re-installed the black plastic duct onto the front of the blower. Then, on the top of the dryer, I dissassembled the control panel from the rear, by removing 5 screws. I then found the resistor mounted on the back of the timer, and replaced it with the new one. Since the new resistor did not come with terminal lugs crimped on its wires, I had to cut the terminal lugs off of the original resistor and solder them onto the new resistor. I then reassembled the control panel. I then plugged the dryer back into the wall outlet and did a test run with no clothes. IT WORKED !! Then I reinstalled the lower front access panel and ran the dryer with wet clothes. IT WORKED !! Read more...

Your Price

$15.82

Light Bulb - 15W

★★★★★

(7)

PartSelect Number PS11765699

Manufacturer Part Number W10888319

Sold individually.

Installation Instructions

Ronald from Coraopolis, PA

both light bulbs in refridgerator and Freezer burnt out

Removed the bulbs and replaced Read more...

Your Price

$17.31

Light Bulb

★★★★★

(1)

PartSelect Number PS11765660

Manufacturer Part Number W10887190

This appliance light bulb is used for many Maytag brand refrigerators. This 40W light bulb is frosted. Sold individually.

Installation Instructions

Mark from Wyoming, RI

Freezer cold/reefer hot

Took out all shelves and racks. Pulled out plastic cover. Removed screws holding control unit. Removed unit and accresses defrost circuit board. Replacement is in a cover. One screw would not engage so did not put it back in. Reefer was cold within hour of start and is now 1 week after. Unit would start out cold and then warm up before replacement.
Other parts were snap in furnishings that had become damaged with use. Read more...

Your Price

$46.91

Light Cover Lens

PartSelect Number PS11740384

Manufacturer Part Number WP2317782

Installation Instructions

Jeff from Tulsa, OK

Broken drawer track, broken light lens, inoperative ice maker

The repairs were straight forward. The light lens and pan slide track were a simple matter of slipping the old out and installing the new. The door switch was a bit more tricky to remove. A quick check on the internet (googled the part number of the switch) to find the instructions for removal. Installation with simply the reverse. Read more...

Your Price

$14.58

Light Bulb - 25 W

PartSelect Number PS971228

Manufacturer Part Number 4396822

Sold individually.

Installation Instructions

Dennis from LOUISVILLE, KY

Bulb wouldn't light up, when freezer drawer was pulled open

The repair didn't get done, because both times that I requested a 25-Watt Light Bulb, I received a 3.6 Watt bulb instead & neither one worked. So I tried testing the original bulb in a table lamp & it worked. So I sense that the problem may be in the switch that allows the light to turn on when the drawer is opened & shut off when the drawer is closed. Read more...

Popular Amana Refrigerator Lights and Bulbs

Related Parts

Amana Refrigerator Lights and Bulbs

Find your part

Popular Amana Refrigerator Lights and Bulbs

Related Parts