LED Light Module W11043011

Hello Rick, Thank you for the question. The Module PartSelect Number PS12070396 has 8 lights. Thank you for your inquiry, good luck with this repair!

Hello Neil, Thank you for the question. I suggest testing the switch, PartSelect Number: PS1570910 first to make sure the wires are secure and it has proper continuity. If the switch is good you may need to replace the light module, Part Number: PS12070396. Hope this helps, good luck with this repair!

Hello Sandra, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12070396 for the Fresh Food Section LED Light Assembly. Before starting the repair, make sure the appliance is not plugged into its power source. There will be a Philips head screw that holds the light cover in place. Once removed, pull the cover off from the back. It could be tight so you need a bit of force. There will be two tabs on the left side of the light module to hold the assembly in place. Release the tabs and drop the module down. Unplug the module and do the reverse to put it back together. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello and thank you for writing. Yes, the led module PS12070396 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.

Hi Sean, Thank you for your question. An on order part is a part that is not currently in stock and is on order for 7-10 business days. I hope this helps. Thank you and have a great day!

Hello Ernest, thank you for the question. According to our research, the refrigerator led light module, part number PS12070396, is compatible with your model. We hope that helps!

Hello Frank, thank you for reaching out. We have found some relevant instructions to remove the LED light module. These instructions may not be of the same exact model, but will help you with the process. Remove the lens cover by removing the screw on the rear end using a screwdriver. Then, use a butter knife and insert it from the side of the module. Push it downwards and the module will come off. Depress the locking tabs with the flathead screwdriver and disconnect the wire harness. Follow the same instructions backwards to install the new LED module. We hope this information helps!

Hello Cindy, thank you for your question. This LED module is designed with a built in dimmer! That single dimmer controls all 3 lights in your fridge. As the dimmer begins to fail, that causes the flashing and strobing. LED LIGHT MODULE PartSelect Number PS12070396. Refrigerator and Freezer Light Board PartSelect Number PS11702378. Good luck with your repair.

Hello Joseph, thank you for writing. The part you have indicated Led Light Module attaches inside the cabinet and illuminates the inside of the refrigerator or freezer. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Lori, Thank you for your inquiry. We have researched the model number you have provided and show the refrigerator and freezer led light module as part# PS11702378. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!