Noisy Evaporator Motor/Fan
Our 48" Built-In KitchenAid Frig (1999 model)started getting very noisy about 3 years ago. Two different repairmen plus KitchenAid said 'that was the way it was'. I figured out the noise was coming f...read more

Refrigerator noisy when fan came on
First I removed the power plug, then 2 screws from bottom panel and removed panel. Removed 2 screws from rear panel and removed 2 screws holding fan in rear panel, disconnected 3 wire leads and ins...read more

I had a loose fitting old condensor fan blade on my new motor.
I made a temporary repair by drilling the old blade plastic hub and put a small screw in it to hold it on to the shaft until the new blade arrived. The new blade came in within the two days I needed ...read more

Evaporator fan motor bearings were gone; refrigerator ran very loud as a result.
Removed panel and motor cover at rear of freezer compartment. This requires 1/4" nut driver. Removed motor assembly bracket and wiring, careful to note where ground, neutral and hot were attached. ...read more

refrigerator fan was not fast enough
My refrigerator condenser fan was burned out, and it was so weak you could stop it with your hands, and over time it will stop working.
I order a replacement and change it my self, all you got to...read more