EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Amana Refrigerator Switches

Popular Amana Refrigerator Switches

The refrigerator light and fan circuit uses this three-terminal rocker arm switch. It is an OEM replacement part. Disconnect power before working on this electrical part.
The refrigerator light and fan circuit uses this three-terminal rocker arm switch. It is an OEM replacement part. Disconnect power before working on this electrical part.
What this part fixes:
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Light not working
Installation Instructions
Kevin from Beckley, WV
while closing the door, the light switch fouled, resulting in the switch breaking
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
If your refrigerators interior light is not working, the door switch may be the cause. It turns the light off when the door closes. This is an OEM part. Confirm compatibility using your refrigerators model number.
If your refrigerators interior light is not working, the door switch may be the cause. It turns the light off when the door closes. This is an OEM part. Confirm compatibility using your refrigerators model number.
What this part fixes:
  • Fridge too warm
  • Light not working
Installation Instructions
Clint from Rayville, MO
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
If your refrigerators interior light does not work, the door switch may be involved. This OEM, two-terminal switch responds to the door opening and closing to control the light and provide door-status control. Confirm it fits your refrigerator before ordering.
If your refrigerators interior light does not work, the door switch may be involved. This OEM, two-terminal switch responds to the door opening and closing to control the light and provide door-status control. Confirm it fits your refrigerator before ordering.
What this part fixes:
  • Light not working
Installation Instructions
Stephen from LOVELAND, OH
Light switch lever broke
Unplug refrigerator.
Pry switch out with putty knife
Remove two wires from switch
Attach wires to new switch
Push new switch into slot
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble, replacing the door switch can solve this appliance problem. The tools needed for replacement are a screw driver and wire strippers. Make sure to attach the two wires to the right two poles of the new switch, to do this you can check the resistance of the switch. Unplug the dryer before installing this part, also refer to the diagram provided by the manufacturer.
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble, replacing the door switch can solve this appliance problem. The tools needed for replacement are a screw driver and wire strippers. Make sure to attach the two wires to the right two poles of the new switch, to do this you can check the resistance of the switch. Unplug the dryer before installing this part, also refer to the diagram provided by the manufacturer.
What this part fixes:
  • Noisy
  • Running With Door Open
  • Won’t Start
Installation Instructions
Don from Jacksonville, FL
Switch sticking in on position
FIRST unplug dryer from electrical source, CAUTION, the top of this dryer does not open with clips, do not pry on top to open! On the front of the dryer look under the lower panel, and find two screws, one on the left side, and one on the right, remove these screws, and pull slightly down on panel to remove. Behind this panel find two screws holding the door panel, one on the left, and one on the right, remove the left, and support the door panel while removing the right side. Gently pull the bottom of door panel outward, and the clips on top of door panel will unhinge from top, carefully rotate left side of door panel to floor, and note the wire connections on switch, and orientation of switch, then unplug wires, and move door panel to a comfortable working positon. Door must be open to remove switch, then depress the two plastic retaining keepers on each side of switch, and push switch through toward door. Replace with new switch, reconnect the wires, and reassymble in reverse order. Remember, door assymbly must be inserted in dryer top at an angle, and then bottom rotated downward, and bottom panel nylon guildes inserted into door panel bottom.
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
What this part fixes:
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
Installation Instructions
Gilbert from Clinton, MO
The compressor would not run.
I removed the screws in the lower back panel where the compressor is located. Then I unplugged the capacitor and plugged the new one in. I then checked to see if the compressor would start. It wouldn't so I replaced the overload relay with capacitor and that fixed the problem. The capacitor just plugs into the relay then plugs into the compressor. There are several screws but all in all it is easy.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

This refrigerator dispenser micro switch signals the appliance to release ice or water when you press the dispenser paddle. It responds to paddle movement, completing the electrical circuit while pressed and releasing it when your cup is removed. Worn contacts or a sticking mechanism may cause intermittent dispensing, no response, or dispensing that fails to stop normally. Replacing a faulty switch helps restore reliable paddle control. Unplug the refrigerator before opening the dispenser housing or disconnecting wiring, and handle the wire terminals carefully during replacement. This is an OEM part sourced directly from the manufacturer.
This refrigerator dispenser micro switch signals the appliance to release ice or water when you press the dispenser paddle. It responds to paddle movement, completing the electrical circuit while pressed and releasing it when your cup is removed. Worn contacts or a sticking mechanism may cause intermittent dispensing, no response, or dispensing that fails to stop normally. Replacing a faulty switch helps restore reliable paddle control. Unplug the refrigerator before opening the dispenser housing or disconnecting wiring, and handle the wire terminals carefully during replacement. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
What this part fixes:
  • Light not working
Installation Instructions
Randy from Hays, KS
Broken light switch
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is almost self explanatory. then it gos back to the way you took it off. OH! and don't forget to turn the light bulb all the way back in to the socket , so the light will work after you take the time to install it yourself.I had the water supply line from under the box to the water dispenser in the door and the total bill on that was one hundred thirty seven and a hand full of change.Don't be afraid to do it yourself the savings is enough on one one item to make several months payments on a new one Randy the "Handy Man'
If your refrigerators interior light is not working, the door light switch may be the part to replace. It activates the light as the door opens or closes and has two push-on wire connections. Unplug the refrigerator before installation, and confirm fit using your refrigerators model number. This is an OEM part.
If your refrigerators interior light is not working, the door light switch may be the part to replace. It activates the light as the door opens or closes and has two push-on wire connections. Unplug the refrigerator before installation, and confirm fit using your refrigerators model number. This is an OEM part.
What this part fixes:
  • Light not working
Installation Instructions
Fred from Oceanport, NJ
Door switch module wore out
Pull out old module...
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..

Order new switch..

Fed Ex pkg came on 2nd day..

Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
$31.58
In Stock
This part turns the light on/off as the door opens and closes.
This part turns the light on/off as the door opens and closes.
What this part fixes:
  • Light not working
An electrically operated solenoid opens the ice chute door when ice is requested, allowing cubes to pass through the dispenser. This refrigerator ice dispenser solenoid and door kit replaces components that operate and cover the chute opening. A failed solenoid or damaged door mechanism may prevent ice from dispensing or leave the flap stuck open. An open flap can let warm, moist air enter the freezer, contributing to frost buildup around the chute. Replacing damaged components helps restore door movement and closure. This is an OEM part sourced directly from the manufacturer.
An electrically operated solenoid opens the ice chute door when ice is requested, allowing cubes to pass through the dispenser. This refrigerator ice dispenser solenoid and door kit replaces components that operate and cover the chute opening. A failed solenoid or damaged door mechanism may prevent ice from dispensing or leave the flap stuck open. An open flap can let warm, moist air enter the freezer, contributing to frost buildup around the chute. Replacing damaged components helps restore door movement and closure. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Door Sweating
  • Door won’t open or close
  • Ice maker not making ice
Installation Instructions
Scott from Walker, LA
Ice Dispenser "round chute" broken side tab, ice/water fountain not working
I could see that a tab was broken from the round chute that opens for ice dispensing and closes to seal off freezer ice chute when not in use. With the tab broken, the round door would not shut to seal the freezer chute and dispensing water would spatter everywhere. I looked for just the round door part, but is only sold in the "Ice dispenser solenoid and door kit" I only had to use the round chute/flap from the kit. The instructions were easy to follow and I had the fridge back working in about 10 minutes. It took me longer to find the right star headed screwdriver that I needed to remove the Maytag star screws (5) total. Because I didn't have to replace the solenoid or the spring mechanism, this was especially easy, and now I have those parts on hand if one day I need them!!