Amana Refrigerator Brackets and Flanges
Find your part
Enter your model number or a part number and click "Search"Here is an example model number plate:
Popular Amana Refrigerator Brackets and Flanges
Your Price
$18.66
Control Bracket
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Not dispensing water
- See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Read more...
Your Price
$60.72
Your Price
$4.54
Bracket, Dispenser
I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
PartSelect Number PS11740253
Manufacturer Part Number WP2304673
Installation Instructions
Sean from Boise, ID
Water dispenser hose tip broken.
The part to fix this was a $50.00 part. I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
Your Price
$52.07
Your Price
$63.90
Your Price
$5.69
Your Price
$14.44
Your Price
$42.67
BRACKET
Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place. Read more...
PartSelect Number PS2346744
Manufacturer Part Number 12906303WD
Installation Instructions
blane from upper arlington, OH
no symptoms (previousely damaged product)
Easy repair here, the Refridge was purchased at a discount as a scratch and dent model. the damage was superfical and the parts orderd were simple remove and replace job did not take long at all to replace all parts.Divider pantry: no tools required, simply pull out tray and remove old broken dividers and snap new divider in place.
Brace-Crisper: this takes a screw driver to remove. remove the crisper shelf and insert a screw driver to lift the plastic securing tab. slide out the frame brace and slide the new brace in place the plastic tabs will snap in to place and hold the metal frame in its position.
Grille, Toe: this grill snaps into place no tools required.
Bracket: this is the metal bracket for the front feet, there are 4 screws to remove and the bracket comes off the front of the refridge. unsrew the adjustable screw foot and screw the adjustable screw foot into the new bracket......install the 4 screws and you are done.
Trim-Shelf: no tools required simply pry the trim piece of with your fingers.....some may use a flat screw driver but this riskes scratching the trim piece. the new trim piece snaps into place. Read more...
Related Parts
- All Amana Refrigerator parts
- Amana Refrigerator Caps and Lids
- Amana Refrigerator Circuit Boards and Touch Pads
- Amana Refrigerator Compressors
- Amana Refrigerator Dispensers
- Amana Refrigerator Doors
- Amana Refrigerator Drawers and Glides
- Amana Refrigerator Drip Bowls
- Amana Refrigerator Ducts and Vents
- Amana Refrigerator Elements and Burners
- Amana Refrigerator Fans and Blowers
- Amana Refrigerator Filters
- Amana Refrigerator Grilles and Kickplates
- Amana Refrigerator Handles
- Amana Refrigerator Hardware
- Amana Refrigerator Hinges
- Amana Refrigerator Hoses and Tubes
- Amana Refrigerator Ice Makers
- Amana Refrigerator Insulations
- Amana Refrigerator Knobs
- Amana Refrigerator Lights and Bulbs
- Amana Refrigerator Motors
- Amana Refrigerator Seals and Gaskets
- Amana Refrigerator Switches
- Amana Refrigerator Thermostats
- Amana Refrigerator Trays and Shelves
- Amana Refrigerator Valves
- Amana Refrigerator Wheels and Rollers
- Amana Refrigerator Wire Plugs and Connectors
