Amana Refrigerator Filters

Amana Appliance Parts
Shop By Part Type

Popular Amana Refrigerator Filters

Your Price
$73.99
  In Stock
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(95)
PartSelect Number PS11701542
Manufacturer Part Number EDR1RXD1
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, the filter is in the bottom left grille. In top-freezer units, the filter is located in the middle of the refrigerator. This NSF certified filter reduces 28 contaminants including pharmaceuticals, metals, minerals, pesticides, cysts, industrial chemicals, Class I Particulates and chlorine. It is made up of coconut carbon block and has three layers of filtration. The first layer is particle filtration that helps block larger contaminants. The second layer is micro-filtration, which prevents medium-sized impurities from passing. The third layer is called absorption filtration, which absorbs microscopic-sized pollutants. It measures 2 inches deep, 2 inches wide, 1-1/2 inches high, and weighs 0.5 lbs. To ensure your filter is working its best, it needs to be replaced every six months. This single filter has a simple, quick-turn installation feature that does not require any tools.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
James from Phelan, CA
Old filter and water line to cold water line
Cut a 1/4 inch off both lines and connect. Changed water filter. Found the water filter at Home Depot for 1/2 The price. Look befor you buy. Read more...
Your Price
$73.68
  In Stock
Water Filter
★★★★★
★★★★★
(91)
PartSelect Number PS11722130
Manufacturer Part Number EDR4RXD1
This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...
Installation Instructions
Douglas from Byron, NY
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. Read more...
Your Price
$20.88
  In Stock
Refrigerator Air Filter
★★★★★
★★★★★
(42)
PartSelect Number PS2580853
Manufacturer Part Number W10311524
This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model number to see if this filter is right for your fridge. Location for storage of the air filter may vary from model to model, but generally, you will find a small cover on the back-middle-top of your fridge, which can be popped off to reveal the air filter, which can be easily changed out from there. This part does not come sold with the indicator; it is the filter only. Sold individually.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Fridge too cold
  • See more...
Installation Instructions
Jeanette from JEANNETTE, PA
Replacements
Nothing to it!!! Read more...
Your Price
$74.49
  In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(109)
PartSelect Number PS11722128
Manufacturer Part Number EDR3RXD1
The function of the Refrigerator Water Filter is to filter the water supply to reduce and remove contaminants in your water supply for a certain period of time. The filter is meant to be easily accessible. You should be able to access it through the front, bottom panel of your fridge. This filter should regularly be replaced. It is recommended that the water filter be replaced every six months or every 200 gallons of water to ensure proper removal of impurities and to ensure best flow rates. If your filter isn't functioning properly, you will either get a buildup of impurities or impure water. A buildup of impurities will hinder the water flow to your refrigerator water dispenser and ice maker. If the water is still flowing but it has been more than 6 months since you changed the filter, impurities may be entering your water supply. This model is plastic, white, and measures 12 inches long and 2 inches in diameter. It is sold individually.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Kate from Jacksonville, FL
there were directions
We didn't know where the product went and it was very difficult to install. Read more...
Your Price
$64.42
  In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(8)
PartSelect Number PS8759230
Manufacturer Part Number F2WC9I1
Sold Individually, this OEM water filter is for refrigerators and 50lb freestanding ice makers. The water filter removes contaminants from the refrigerator water supply. It measures 2.5 inches deep, 2.5 inches wide and 8.5 inches high with a micron rating of 0.5 to 1. For the best results change the filter every nine months or 2000 gallons. Follow the instructions in your owner's manual when replacing the water filter.
Your Price
$106.25
  In Stock
Water Filter Housing
★★★★★
★★★★★
(18)
PartSelect Number PS11748615
Manufacturer Part Number WPW10121138
This part does NOT include the water filter. Must order filter separately. his water filter housing is for refrigerators. Water filter housing holds the water filter and connects the water lines to the water filter. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Installation Instructions
Joseph from Elkins, WV
Broke the filter housing,moving the new frig into the house.
Removed all items from frig,put it on its back side,removed metal cover and removed housing screws,hoses. Read more...
Your Price
$15.32
  In Stock
Water Filter Backing Plate
★★★★★
★★★★★
(2)
PartSelect Number PS11743466
Manufacturer Part Number WP67001668
Your Price
$104.56
  In Stock
Water Filter Housing - Black
PartSelect Number PS11759606
Manufacturer Part Number W10862460
Your Price
$101.33
  In Stock
Water Filter Head
★★★★★
★★★★★
(8)
PartSelect Number PS11743574
Manufacturer Part Number WP67004106
Includes tubing.
Fixes these symptoms
Installation Instructions
wade from Waterford, VA
The water filter inlet tube cracked
Begin by turning off the water source from the wall, next using a line wrench, remove the brass water line fitting nut from the copper water line from the wall. Next remove the second water line from the plastic push fitting by depressing the fitting to release the water line. Remove the Styrofoam insulation piece that resides between the water lines that run into the refrigerator, then pull the old filter head out. Reverse steps for installation. Read more...
Your Price
$13.48
  In Stock
Screen
★★★★★
★★★★★
(1)
PartSelect Number PS11746894
Manufacturer Part Number WP96160
Found on the water inlet valve.
Installation Instructions
Peter from Aurora, IL
The fill cycles would start then stop suddenly
This was an easy repair.
1st I removed both water hoses
2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve.
3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose.
4th I removed 2 hex head screws that held the water valve to the backing plate.
-----------that was a whole 5 - 10 minutes!------------
Next I reversed the process
4th I attached the inlet valve with the 2 hex head screws
5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp.
6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw.
7th re-attached the hot & cold lines................................DONE
15 minutes tops
Read more...

Related Parts