Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This part does NOT include the water filter. The water filter is sold separately. The water filter housing holds the water filter and connects the water lines to the water filter.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul E - March 4, 2018
Verified Purchase
Easy as 1-2-3 !!
Take out 2 screws and pull out assembly , then take off water hoses. Put everything back in reverse process. Takes about 15 minutes.
★★★★★
★★★★★
James K - September 6, 2021
Verified Purchase
it was a very easy repair
The part was a perfect fit.I knew it was on back order so I was in no rush to get it. Thanks for the great service.
★★★★★
★★★★★
Stephen F - October 25, 2019
Verified Purchase
Watched the video on the repair and finished repair quickly
Received part ahead of estimated time and it solved the problem.
★★★★★
★★★★★
Edward K - March 4, 2019
Verified Purchase
great company
THIRD TIME ORDER PARTS FOR VARIOUS STUFF WITH MODEL NUMBERS HARD TO FIND PARTS WITHOUT COMPANY LIKE THIS GOOD STORE.
★★★★★
★★★★★
David R - June 22, 2022
Verified Purchase
Easy, worked fine
Simple, easy replacement. There was also a video showing how!
★★★★★
★★★★★
Curtis R - April 6, 2021
Verified Purchase
Easy repair, part fit perfectly!
I was a little worried that the part may not fit as good as the original but it was just like the original part perfect!
★★★★★
★★★★★
Jack W - July 1, 2020
Verified Purchase
As advertised
Part arrived promptly after order. Was exactly what I needed, and relatively easy to install with the help of a YouTube video.
★★★★★
★★★★★
Michael M - November 21, 2022
Verified Purchase
Original part, used the on line video to replace it.
After watching the video the replacement was fairly easy and solved the problem. I had poor to nothing water flow and this part solved the problem.
★★★★★
★★★★★
Lisa S - July 28, 2022
Verified Purchase
fit perfectly, working great, good video on installation
The part fit well, the installation video was clear and easier than the way I had taken it out ;)
★★★★★
★★★★★
Bill P - August 14, 2018
Verified Purchase
Water filter housing saved the day
Once I realized the filter was not the problem, I found the housing and ordered it - overnight (can't live without ice & cold water). The star of the show was the youtube video linked on the PartSelect website! The part arrived before 9am and was in and working before 10.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water filter not seating into housing
1st step is to watch the videos already available. Hands down... can't beat them. Step 2 is copy what was done in the videos. The only other piece of info I could suggest is when you remove the water line going to the filter housing from the solenoid valves is to tie/tape a piece of string onto it so you can find it when you rev
... Read moreerse the procedure to put it back together. I am 70+ years old and do not bend in the middle, so the string would have been a great thing and would have lessened the frustration of trying to find the end of the tube. Otherwise... happy sailing!
Read less
Rob from Newberg, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water pressure from the dispenser was just a trickle even after replacing the filter.
I followed the video on this site. It was a pretty easy repair. Unplugged the fridge and turned off the water. Took off the bottom front panel. Used a nutdriver to remove the nuts holding the old filter housing in place. Unhooked the metal hook shown in the video. Disconnected the water from the old housing and removed it. The wate
... Read morer line was a little short but I was able to reach in far enough to disconnect it without having to disconnect the line from the back of the fridge. Then I just reconnected everything to the new filter housing and installed a filter. Once I turned the water back on and plugged the fridge back in, it had better pressure than it ever has. Just watch the video and follow along.
Read less
Marika from MEDFORD, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter housing was leaking under the refrigerator
I looked up the video on part select for how to replace the filter housing. Seeing it was fairly easy, I order the parts, which arrived promptly. Then, once I had some free time, I uninstalled the old housing and installed the new one. Following the video made it easy.
Alexander from ANDERSON, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Well, somehow when I replaced the water filter I turned and don’t suppose to so, it did started licking.
First, I watched the video the sale agent sent it to me. Then I decided to do it myself, I’m a 62 woman that I like to show myself how smart we are as a human being, thanks God! It took me less than 30 minutes to make it work!!!!
Followed the included installation link from this site No difficulty.
Staton from THE VILLAGES, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water housing was broken
Replaced the water filter housing. The part was correct, the sales person was well informed and was very helpful . The sales person was Lou Ann
Marcus from PONTE VEDRA, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the Refrigerator Water Filter and Water Filter Housing
I watch the video and it was easy as pie 1,2,3 and I was done in know time flat...Thanks for everything I'd recommend these how to do videos to anyone they will save time and money on all your appliance repairs!
Removed the front cover on the bottom of fridge. Removed the water filter from the housing. The housing unbolted by two 1/4 screws at the front of the housing. Removed the back cover at the bottom of fridge. Removed the solenoid valves in order to pull the housing out the back to easily undo the water lines on the housing. (I couldn’t und
... Read moreo the water lines from the front of the fridge.) Once I got the water lines undone I replaced the housing and did the steps in reverse. Water pressure is now back to normal!
Read less
Scott from MONTGOMERY, TX
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter housing wasn't let the water go through the filter
I got model number off my unit and order the part. That was after trying a lot of different filters first. I did a rush order so I got it in 2 days. Pulled the unit out to shut the water off. Then took the back off so I could take the 2 screws that hold the water value . That way I wouldn't have to go back and forth. Now I went to the fro
... Read morent. I already had had the vent cover at the bottom of the unit off. I had a head lap on so to make it easier to see under the unit. Then I use the nut driver or you can use 1/4 inch drive ratchet with sockets. To take the 2 screws out that hold the filter housing. Then lift the spring wire that is on the left side of the release botton. Then push the wire up out of the way. Reach back and pull the water value forward so you have slack in the water lines. Now you can pull the fliter housing out to you. Now release the 2 water lines by pushing down on the rings around the water lines and hold while you pull the water lines out. Now the old water filter housing is free you can set it to the side. I inspected the new filter housing for any deformities and cracks before I started installing. Now I hooked the water lines up by pushing them into the right size spring ring hole. Once lines was all the way in I pulled back on the water lines to make sure they were locked in place. Then I put a new water filter in and turned the water on to make sure of no leaks. Then I put everything back together in the reverse order I took it apart. Then I check the spicket to make sure everything was working right. After that I was able to push the refrigerator back in and then wipe everything up and I was done.
Read less
DANIEL from DAVENPORT, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both the ice maker and water dispenser in the door were not getting water.
I first replaced the water valve, but that did not correct the problem. I then replaced the filter, but still no luck. In the end, it turned out to the the water filter housing was malfunctioning and not letting water through the filter when the filter was installed (it did let water through when the filter was removed, however). I rep
... Read morelaced the water filter housing and all worked well once again. The filter housing is not difficult to replace. The hardest part is figuring out how to remove the hoses from the filter. Just push the hose in while holding the plastic ring around the outside, then pull the hose back out.
Read less
Grady from LYONS, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim Phillips
January 29, 2019
Water dispenser suddenly started filling very slowly. Changed the filter still very slow fill. Removed the filter and it flows great but i noticed water leaking out the filter housing outlet. Replaced the filter and again very slow fill. Do i need to replace the filter housing? Again without the filter great flow so it seems the switches and valve are ok.Thanks.
For model number c
Hello Tim, thanks for your question! We would recommend changing the filter housing, as changing the filter did not fix the issue and ruled out the filter being the problem. It is most likely an issue with the connection to the water filter in the housing. We hope this helps, and good luck with your repair!
17 people found this helpful.
Was this helpful?
Thank you for voting!
James
March 13, 2019
Every few days my water dispenser slows and i get a pulsating sound. I can fix it by removing and reseating the filter. But then it comes back in a few days. Also the filter takes a lot of pressure to seat and sometimes unseats on its own. Could this part fix my problem?
Hi James,
Thank you for your question. If the water filter is not seating correctly in the housing, replacing the housing may help. I would check first to make sure that housing you have now is fitted correctly in the refrigerator and not causing the issue. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 6, 2017
Replaced water filter and no water comes out of dispenser.Removed new filter and notice water leaking from filter housing ports. Removed housing cleaned ports with air to blow out any foreign material. Reinstalled housing and filter, still no water come out of dispenser. I already replaced inlet valve.
For model number ed5vhexvq02
Hi Joe,
Thank you for your question. I would suggest then checking your micro switch in your dispenser area. You can test that part with a multi meter to be sure. If that part is also fine, the problem may lay with your dispenser control board. I hope that helps. Good luck with your repair.
When removing the filter to replace it, should any water be spraying within the housing? If it is, would this mean housing is bad and that is why dispenser is very slow with water and making ice?
For model number ED5LVAXWB05
Hello Gordon, Thank you for the question. The Housing should Auto Bypass so not water should be spraying or leaking while changing or removing the filter. We recommended replacing the Housing. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
GABRIEL
August 30, 2021
Water housing leaks. Id like to replacement
For model number PS11748615
Hello Gabriel, Thank you for reaching out to us. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
December 9, 2017
No water at the dispenser with the filter installed. I replaced it with a new filter and there is still no water. It works fine with the filter removed [bypass filter]. Do I need a filter housing?
For model number ED5VHEXVQ06
Hello Gary,
Thanks for your question. There are a few parts to consider beforehand. First, test the water inlet valve with a multi-meter for continuity and replace it if it shows no continuity. See if the water lines are frozen and if they are receiving sufficient pressure as well. We would also advise checking the door switches for continuity, as they can cause the dispenser to not dispense water if they fail.
I hope this helps.
Unable to remove water filter from the housing! Can't get the button to release.
Hello Paul, Thank you for the question. If the filter button will not release, You may have to remove the housing for the filter to open it up and get the filter out. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rodney
January 21, 2019
When I pull the filter out, water pours out of the back of the tube. No water pressure when dispensing water. Dispenses very slowly.
For model number ED2NHGXVQ01
Hello Rodney, Thank you for the question. It sounds like the filter, PartSelect Number: PS11722128 may need to be replaced. Hope this helps, good luck with this repair!
When water is dispensed at the door in addition to the slow flow, there has been a buzzing noise. This happened also with the installation of a new filter.
For model number ED5FHAXst00
Hi Ed, thank you for your question. Usually when you are having an issue like that it is best to check the water filter for any dirt or debris that could be in the top. Otherwise you might have to look at your water inlet valve for being the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chuck
August 26, 2023
I just replaced the water filter housing (whirlpool part # w10121138). I reconnected each water line, but the smaller one (not the one from the inlet valve) came loose and I do not know where/how to reconnect it.
Please reply and advise.
Thank you.
For model number ED5KVEXVB00
Hello Chuck, thank you for reaching out. To reconnect the water line, you may need to insert your water line into the port firmly, until the water line fits tightly. We have also attached a relevant video that may help you with the installation of the water lines. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
