Replacing your General Electric Dishwasher Fine Filter
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
Part# WD12X10109 replaces these:
AP3794323, 1088479, WD12X10050
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.8
Filter By Rating:
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kelly S - December 1, 2021
Verified Purchase
Easy repair
Very easy repair
★★★★★
★★★★★
Bruce M - April 28, 2021
Verified Purchase
Repair Dishwasher
Fit perfect
★★★★★
★★★★★
Arthur T - May 13, 2020
Verified Purchase
Easy repair
Part is a OEM and worked well no issues
★★★★★
★★★★★
Cleveland A - September 30, 2018
Verified Purchase
problem solved
replaced both the course and fine screen in my Whirlpool dishwasher. hoping to stop small food particles from plugging the arms and after two loads it appears to have worked. both loads all the dishes were clean.
★★★★★
★★★★★
Philip L - June 20, 2018
Verified Purchase
Dishwater Part
Exactly what I needed
★★★★★
★★★★★
Steven R - May 31, 2018
Verified Purchase
First time user is impressed
Parts, themselves, worked fine. As a non-technical person, I was most impressed by the ease and efficiency of your website in navigating and collating the myriad of model and part numbers. On on the delivery side, one part arrived a day earlier than specified and the other one day later. Neither was within the 1.8 days delivery that is advertised.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Old parts showing wear
Watched a YouTube video on disassembly, parts replacement, and reassembly.
My dishwasher was doing a terrible job of cleaning. It was leaving food on dishes, and wasn't dissolving all the detergent. I replaced all the spray arms and the filter, as they seemed clogged, and god knows how old. It's a super easy repair, and the dishwasher now works as if it were brand new.
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Once upon a kitchen dreary. Washing dishes made me weary. All the dishes would not clean. Gunk clogged up my filter screen. The lower spray arm stuck and rattled. With flying muck my dishes battled. The muck had won and I had lost. The repairman said it would really cost. And so I did a google searc
... Read moreh. Partselect got me out of a lurch. Correct parts were easy to choose and service so quick I couldn't lose. I took off the old parts and tightened the new No tools were needed my fingers flew. And now my dishes come out clean I feel competent and frugal, you know what I mean?
Glasses and Cups contained baked on sand after washing.
Removed the bottom tray, it just pulls straight out, once the tray was removed, the bottom revolving sprayer just lifts right off. Under this sprayer is a self-cleaning filter. There is a plastic piece that screws the filter into place, this part unscrewed easily by hand. Once unscrewed, the filter lifted straight up. I then reversed
... Read morethe process with the new filter and the problem was solved. Note: The old filter was full of sand and grime.
Read less
Brian from Newburyport, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
55 of 63 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hollie
September 11, 2017
My dishwasher is draining I can hear it. But I don't hear any water moving around to clean or rinse dishes.And dishes are not clean
For model number GDWT100R05WW
Hi Hollie,
Thank you for the question, Sounds like you need to replace the Circulation Pump Impeller Kit. This pump is what sends the water to the spray arms to wash the dishes. If the water is not circulating during the wash cycle then the Circulation Pump may need to be replaced.
Hope this helps!
My dishwasher is not draining the bottom is holding water. The pump has been replaced but it's still not draining.
For model number PDW8612K03SS
Hello Luigi, thank you for inquiring. For this symptom you will want to replace either the Check Valve Flapper part PS258167, the Drain Pump part PS260804, or the Impeller and Seal Kit part PS259598. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cliff
November 3, 2017
My dishwasher is not draining the bottom is holding water. What is the likely causes?
For model number PDW8280J10SS
Hi Cliff,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the check valve flapper, the drain pump, the sump filter and housing, the sump, the circulation pump and impeller kit and the drain tub. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
February 16, 2018
My dw is not getting the dishes clean and the detergent looks like it did when I put it in. Suggestions? Can I use anything to clean these parts instead of replacing? If so, what parts and what to use?
For model number GLD2800V00BB
Hi Joseph, Thank you for the question. It sounds like the water is not spraying or circulating within the appliance. First I suggest the spray arms You will need to remove them to see inside to see if there is anything built up and blocking the water from flowing through. If they are clear, you may need to replace the circulation pump, PartSelect Number PS3511326. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sterling
December 19, 2018
Hello, my dishwasher is not draining. If i disconnect the drainage hose, it drains immediately, which to me would suggest the issue is the pump, not a blockage or flapper valve. Am i on the right track? Could it also be the sump?
For model number PDWT380R10SS
Hi Sterling, thank you for your question. It does sound like it would be the pump that is the issue. However if it is the sump, you could actually inspect that part to see if there are any blockages in it. From what you mentioned you did not see any, but if you wanted to take another look that would not hurt. The sump is more of like a physical housing part that helps direct water and holds other electrical parts. So if there is something wrong with it, that would be something that you could see physically. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
November 21, 2018
I replaced the module rinse and cap assembly. The soap pod still sits undissolved at the end of the cycle.What part needs attention or replaced?
For model number PDW7300g00BB
Hello John, thank you for your question. If just the rinse aid cap was replaced, that would not fix the issue of the soap dispenser not opening. The whole dispenser assembly should be replaced, part number WD12X10163. If that was replaced and the issue is still happening the issue would be with the control board itself, part number PS783633. Unfortunately, that board has been discontinued by the manufacturer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Annie
August 15, 2022
Comment nettoyer le filtre? il est inaccessible.
For model number GSD6210K02SB
Bonjour Annie, Merci pour la question. Vous devrez retirer le bras gicleur inférieur pour accéder au filtre. Vous devrez faire pivoter le bras dans le sens inverse des aiguilles d'une montre et le soulever. Si vous avez besoin d'aide pour passer une commande, le service client est ouvert 7 jours sur 7. N'hésitez pas à nous appeler. Nous avons hâte d'avoir de tes nouvelles!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ruth
March 30, 2023
What does the fine filter part do? Does this hold food particles? If so can it be cleaned or has to be replaced?
For model number GLD5604V00WW
Hi Ruth, thank you for reaching out. The fine filter, part number PS958919, is used to remove food particles and debris from the water to prevent the drain from clogging. It can be cleaned. We hope this information helps!
Was this helpful?
Thank you for voting!
Denise
July 4, 2023
My dishwasher is leaking. I was hoping to fix it myself before calling someone.
Before it started leaking, I also noticed it wasn't cleaning the dishes very well.
For model number CDWT280V05SS
Hello Denise, thank you for the query. According to our research, we would recommend checking the water inlet valve, part number PS3654179, to fix the issue. We hope this helps!
Every few months i have to take off the two spray arms and clean out spray jets that get plugged with food particles. Is there a filter that should prevent food particles from getting back into the spray cycle?
For model number PDW8680N00SS
Hello Dennis, thank you for your question. Model PDW8680N00SS, has two filters at the bottom of the dishwasher that should be cleaned each time the dishwasher is used. There is a large filter screen that catches large food particles, part number PS959277 and a smaller filter screen that catches fine particles, part number PS958919. We hope this helps.
