The upper spray arm helps distribute water from the top of the dishwasher tub.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Dishwasher ARM SPRAY UPPER Assembly
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
Part# WD22X10084 replaces these:
AP5657391, WD22X10027, WD22X10045, WD22X10069
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carl S - November 30, 2021
Verified Purchase
Easy repair , solved the problem
Easy and well explained wonderful resource
★★★★★
★★★★★
Patrick R - June 21, 2018
Verified Purchase
Never buying again.
Received the wrong part, then told it was my fault. I returned the part paying the shipping then was only refunded the money for the part. Shipping cost more than the part. I will never recommend part select or buy from here again. It’s my fault and I certainly learned my lesson. Will not be making that mistake again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
install missing upper spray arm destroyed by renters.
Dish Washer not cleaning well, spray arms not turning much all ttree had mineral build-up and even trash in them.
Ordered and replaced all three spray arms. The upper and middle spray arms were quickly replaced with a net-driver and are now working much better. The lower spray arm required no tool, just turn it CCW and lift it up. After replacement lower spray arm is still not moving at all. Maybe the lower spray arm washer is defective or the pum
... Read morep is just not putting out enough water. Will consider further repairs or replacement of the dish washer, it is 13 years old and used daily.
I watched the video, read the instructions and went to work. This was the easiest repair I have ever done. I'm 71 and if I can do all 3 spray arms in a total of 15 minutes, anyone can. The hardest part was getting up off the floor when I was finished. The spray arms were all clogged, we have very hard water.
My dishwasher was doing a terrible job of cleaning. It was leaving food on dishes, and wasn't dissolving all the detergent. I replaced all the spray arms and the filter, as they seemed clogged, and god knows how old. It's a super easy repair, and the dishwasher now works as if it were brand new.
For those of you that have this problem, please note that there may be three arms to your dishwasher, not just two. I also recommend calling this company to make sure you get the right part...there was no picture for the parts I needed.
Diswasher wasn't cleaning the dishs because the spray arms were clogged with calcium deposits.
Replacement of the arms is very simple, the bottom arm pulls out after turning it counter clockwise, no tool needed. The upper arms need the use of a nut driver or simlar tool to remove the hex screws holding them to the water supply tubes. The hardest part of the repair will be removing the top dish tray. This requires twisting the door
... Read moreslide end retainers outward to remove them and then the dish tray will slide out allowing easy removal of the arm. The top arm is mounted the body of unit. This problem would not have occurred if there was an inline filter on the cold side to filter out calcium (whole house filter). Another way to have corrected this without the purchase of parts would be to run the dishwasher on the rinse cycle 3 or 4 times using 1 cup of lime away on each rinse and also by removing the arms and soaking the arms in a 50/50 solution of water and lime away for 24 hours. This will break down the calicum and enable the arms to be cleaned using a garden hose. New parts however save time and labor in cleaning the arms, however the main drain and supply lines to the arms still need the rinsing prior to replacing the new parts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
VINCE
November 2, 2021
I need the screw
For model number Dishwasher Upper Wash Arm Assembly WD22X10084
Hi Vince,
Thank you for your question. Before we can provide you with information on the screw, we will need the model number from your dishwasher. Here is a link from our website that you may reference on where to locate the model number on your dishwasher, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kristen
August 18, 2023
Can this be taken apart (opened) so you can clear the clogs? Or is the solution to always replace the spinners?
Thank you
Kristen
For model number pdw7712n00ss
Hello Kristen, thank you for reaching out to PartSelect Canada. Yes, you may open the arm spray upper assembly to clean it. You may follow these instructions to open this part to clean it:
1) Open the dishwasher door. Remove the upper rack to get the rack out.
2) Grab the rails and pull them out.
3) Take off the end caps off by just turning and pull them out. If you have the new style end cap, remove it by small flathead screwdriver to release the locking tab.
4) Now pull off the rail with the end caps off. Remove the screw of arm spray upper assembly using nut driver.
5) Now grab the arm spray upper assembly and take it out. Use the wire to clear out the clogged holes.
6) Poke the wire all the way to the bottom.
7) Make sure you clear out any food deposits or any other obstructions.
8) Now follow the same method to assemble it back.
If the holes of the arm spray upper assembly are still blocked, then you may need to replace the arm spray upper assembly, part number PS3511316. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Jessica
December 7, 2021
I need the upper spray arm screen. Model number: GLD4500R00BB. Do you know what the part number is?
For model number GLD4500R00BB
Hello Jessica, thank you for writing. The upper spray arm doesn't have a screen. The upper spray arm part number is PartSelect Number PS3511316. We hope this helps.
Was this helpful?
Thank you for voting!
Paula
November 22, 2022
Can you please tell me what size screw is needed for the upper wash arm assemble on the above profile ge dishwashwer. Model # PDW7800N00BB. Thank you. It has fallen off.
For model number PDW7800N00BB
Hello Paula, thank you for your question. The screw is part PS258462 and is Size 8-18, stainless steel screw, hex head. Approximately 1 1/2" long, smooth shank. We hope this information will help you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
