( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

DOME FLOAT WD12X10119

Rated by 1 customer

Easy

More than 2 hours

Ratings submitted by customers like you who bought this part.

$ 8.06

Does this part fit my model?

Need help finding your model number?

PartSelect Number PS958929

Manufacturer Part Number WD12X10119

Manufactured by GE for General Electric

Troubleshooting
Customer Repair Stories
Questions and Answers
Related Parts
Model Cross Reference

Troubleshooting
Customer Repair Stories
Questions and Answers
Related Parts
Model Cross Reference

Troubleshooting

This part works with the following products:

Dishwasher.

Part# WD12X10119 replaces these:

AP3794324, 1088489

Customer Repair Stories

Average Repair Rating: 2.5 / 5.0, 1 reviews. What's this?

Sort by:

< Prev
1
Next >

Control module went out - causing the heating element to super heat, melting several of the plastic interior parts

I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.

Other Parts Used:

Sump Filter and Cover

Dishrack Rollers and Axles - Kit of 8

BASKET ASM SILVERWARE

Dishwasher Detergent Dispenser Pump

Mark from Omaha, NE
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

31 of 191 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

< Prev
1
Next >

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

Sort by:

< Prev
1
Next >

Troy

January 15, 2018

My dishwasher won't drain intermittently. If I remove the float and ball and replace it works for a while. What else could be casing this unit not to drain. I have replaced the pump already.

For model number GDWT200R10WW

Hi Troy, Thank you for the question. This dishwasher has a service mode to help the technician in troubleshooting the dishwasher. Each part may be cycled to detect if it is functioning properly. Components are cycled by pressing keypads to the right or left of the start/reset keypad. Determine which type of control panel is present (flat or bowed) and then use the matrix on the tech sheet to determine how to cycle each component. To enter service mode, Press the cookware and the heated dry keypad simultaneously for 3 seconds. Hope this helps!

Was this helpful?

Thank you for voting!