Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub spin smoothly and to stop the washing machine from shaking during the cycle.
NOTE: This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly at the same time.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter P - January 13, 2021
Verified Purchase
Not to easy a repair
The bearing seal and gasket worked and parts delivery was quick.
★★★★★
★★★★★
Rafael B - October 8, 2023
Verified Purchase
No more noise
Fast shipping and fair prices. My washer is nice and quiet now. Thank you
★★★★★
★★★★★
Russel M - November 13, 2023
Verified Purchase
Parts were just what I needed
Parts were easy to order and came very quickly. Great service!
★★★★★
★★★★★
Steve H - June 26, 2018
Verified Purchase
Major repair
Repair went as planned. Appliance is working fine now.
★★★★★
★★★★★
Dan S - October 14, 2022
Verified Purchase
Great part!
Went in and worked perfect.
★★★★★
★★★★★
Roberto L - February 11, 2021
Verified Purchase
Worked as expected
The part was as expected and good quality.
But I paid for next day air and did not get the part till days later
< Prev
1
Next >
Installation Instructions
Average Repair Rating: 2.4 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud grinding noise, especially during the spin cycle.
First I watched several videos on YouTube, numerous times. When I started to disassemble the washer, I put the parts I removed on the floor in the work area in the order I removed them. I also took a couple of photos of where wiring and hoses went so I would have a reference the next day (I took parts of two days to complete the repair).W
... Read morehen I removed fasteners (screws, etc), I labeled them as to what part they went with, making re-assembly easier and faster. The most difficult part was re-installing the wire retainers on the door bellows (make sure you use some liquid dish detergent as lubricant). The results were great, I have a like "new"washer now.
I took the washer completely apart and ordered any parts that looked worn and put it back together. It’s working like new and will last for a few years
willard from RIVERSIDE, CA
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very nosey
Replace both bearings and seal also replace spider gear due to the bearing seal surface damage,also replace drum gasket and door gasket and all shock absorber.The clean up two more time then the repairs did.
Followed the step-by-step video, you end up taking most of the washer apart. Got the drum out & apart, then ran into a wall with the bearings. Couldn't get them out - acted like the housings were frozen. Took all the pieces of the washer to the curb for garbage pickup. I never opened the replacement parts and will be returning them.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
July 5, 2021
When replacing the rear tub bearing should any other parts be replaced? Can bearing be replaced or should tub assembly be replaced? What is bearing part # and cost and what is rear tub bearing assembly part # and cost? Thank you. Don
For model number WM2277HB
Hello Donald, Thank you for the question. When replacing the Bearings we also suggest replacing the Rear Tub Gasket. We hope this helps!
There are two bearings in the back of the washer. Do I need to order two or do two bearings come with 1 order?
For model number 79641182311
Hello Casey, Thank you for the question. This model lists one Ball Bearing Part #: PS7785069 and One Ball Bearing Part #: PS11711138. The Bearings are sold separately. We hope this helps!
Hello Russell, Thank you for your inquiry. Researching the model number that you have provided, we would recommend checking the spider, the tub bearing, the stator, and the rotor. Good luck with your repair.
Did this question help you?
Thank you for voting!
Russell
February 27, 2023
motor sounds like it is running but the drum will not move?
For model number wd2233hd
Hello Russell, Thank you for your inquiry. Researching the model number that you have provided, we would recommend checking the spider, the tub bearing, the tub gasket, the stator, and the rotor. Good luck with your repair.
Did this question help you?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7785069
Manufacturer Part Number: 4280EN4001C
