Kenmore Washer Legs and Feet

Kenmore Appliance Parts

Popular Kenmore Washer Legs and Feet

Your Price
$7.45
  In Stock
Kenmore Washer Foot, Front - Single
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11747965
Manufacturer Part Number WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...
Your Price
$25.94
  In Stock
Kenmore Washer Screw-In Plastic Leveling Leg
★★★★★
★★★★★
4 Reviews
PartSelect Number PS1152204
Manufacturer Part Number 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.
Installation Instructions
Sandra from Denton, TX
Stopped agitating versus level washer feet/leg
My washing machine stopped agitating and spinning and I couldn't afford a repair man...plus I wanted to exhaust any obvious problems first. One of the leveler feet had broken years ago. Since I luckily had determined via reading other posts that the agitator won't work if the cycle safety switch is not functioning right, I thought the safety switch might need to be changed but after careful thought, I decided to order a new levelling leg first because maybe the broken levelling leg was shaking the safety switch so it wasn't connecting right. Once I received the leg overnight, I flipped the washer on its side and had to drill out the old leg. It was a little tricky because of how it broke, but the drill worked. I flipped the washer back up, leveled it with the new foot, and the agitator was miraculously working again...just like new. I didn't need the safety switch. Thanks to partselect.com for having the details of my washer parts to study up on and get me the right part so quickly. I saved myself alot of money. Read more...
Your Price
$11.21
  In Stock
Kenmore Washer Leveling Leg with Foot
PartSelect Number PS11738005
Manufacturer Part Number W10862938
Sold individually.
Your Price
$10.32
  In Stock
Kenmore Washer LEG ASSEMBLY
PartSelect Number PS7788210
Manufacturer Part Number AFC72909305
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduction. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.
Installation Instructions
Lonnie from JACKSONVILLE, FL
Very nosey
Replace both bearings and seal also replace spider gear due to the bearing seal surface damage,also replace drum gasket and door gasket and all shock absorber.The clean up two more time then the repairs did. Read more...
Your Price
$17.00
  In Stock
Kenmore Washer Leveling Leg
PartSelect Number PS11741907
Manufacturer Part Number WP367594
Your Price
$24.78
  In Stock
Kenmore Washer Leveling Leg
★★★★★
★★★★★
1 Review
PartSelect Number PS2349253
Manufacturer Part Number 134639100
Sold individually.
Your Price
$20.26
  In Stock
Kenmore Washer LEG ASSEMBLY
PartSelect Number PS8747659
Manufacturer Part Number 4263FA3933C
Installation Instructions
thomas m from CARMICHAEL, CA
leg broke off inside housing
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new leg was a breeze. Read more...
Your Price
$8.36
  In Stock
Kenmore Washer Leveling Leg
PartSelect Number PS10062745
Manufacturer Part Number W10739673
Sold individually.
Installation Instructions
Oralia from DALLAS, TX
washer shaking
the repair went well but I still haven't received a refund for the order was was sent incorrectly. Order #22085769 order date 2/3/23 Read more...
Your Price
$20.50
  In Stock
Kenmore Washer Rear Leveling Leg
★★★★★
★★★★★
1 Review
PartSelect Number PS11741869
Manufacturer Part Number WP358594
This leveling leg is sold individually.
Installation Instructions
david from SEVERNA PARK, MD
plastic cover came off rear leveling leg
slipped new rear leveling legs into leveling fixture. Fit even though it wasn't specified to be the right part for this old washer. Read more...
Your Price
$20.75
  In Stock
Kenmore Washer Rear Leveling Foot
★★★★★
★★★★★
1 Review
PartSelect Number PS334463
Manufacturer Part Number 285244
Sold Individually. Used to help stabilize the appliance on uneven surfaces.

Related Kenmore Washer Parts