Kenmore Dryer Legs and Feet

Videos!

Your Price

$6.40

Kenmore Dryer Leveling Foot

★★★★★

13 Reviews

PartSelect Number PS1609293

Manufacturer Part Number 49621

If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Bryan from west valley city, UT

dryer had no heat, all other functions worked

After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly Read more...

Videos!

Your Price

$29.47

Kenmore Dryer Levelling Feet, Pack Of 4

★★★★★

1 Review

PartSelect Number PS11770254

Manufacturer Part Number W11025920

Introducing the Whirlpool Leveling Feet, a genuine OEM part designed for optimal function and compatibility with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. This pack of four leveling legs provides sturdy support and ensures the stability of your dryer by facilitating height adjustments. Maintain the balance of your dryer conveniently with this kit, specially designed to mitigate floor irregularities. Prior to installing this part, disconnect the power and consider wearing work gloves for hand protection. The precision design promises a flawless fit and easy installation. Enhance the efficiency of your dryer with our Whirlpool Leveling Feet.

Installation Instructions

ESTELA from Houston, TX

Had 2 feet missing from dryer

He had to put it flat on one side in order to put the legs on it. Read more...

Videos!

Your Price

$34.74

Kenmore Dryer Adjustable Leveling Foot - Black

PartSelect Number PS425733

Manufacturer Part Number 216396900

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.

Videos!

Your Price

$9.62

Kenmore Dryer Leg

★★★★★

1 Review

PartSelect Number PS3523560

Manufacturer Part Number 4778EL3001B

This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer unit. Please note that this dryer leg is sold individually.

Your Price

$28.42

Kenmore Dryer Leveling Feet

PartSelect Number PS12749516

Manufacturer Part Number W11444912

Introduce the ideal addition for your home appliance repair needs with the FEET-LVLNG Dryer leveling leg set of 4 from Whirlpool. As a genuine OEM part, these leveling legs are tailored to work for select models from brands like Whirlpool, KitchenAid, Maytag, Jenna-Air, Amana, Inglis, and Magic Chef. This set adds significant stability to your dryer by providing optimal support and easy modifications for the height of your dryer. It is advised to disconnect power supply before installation to ensure safety and we recommend wearing work gloves during fitting. So, ensure your dryer is operating at its most efficient level and maintain its stability with this premium set of leveling legs.

Your Price

$9.62

Kenmore Dryer Leveling Leg Pad

PartSelect Number PS11741457

Manufacturer Part Number WP3391943

Your Price

$17.15

Kenmore Dryer Leveling Foot & Nut

PartSelect Number PS11746502

Manufacturer Part Number WP8563585

This individual levelling foot is compatible with different types of standing home appliances and is a genuine OEM part. Made of high-quality metal and featuring a metal securing nut, this levelling foot is made of plastic and is used to level the pedestal for your appliance. Over time and through gradual wear and tear of moving your appliance around or through excessive movement and impact, a levelling leg will crack and break, and eventually destabilize itself. If you find your appliance is imbalanced or vibrates excessively when in use, this levelling foot may need to be replaced. Since most appliances take one foot on each corner, 4 corners being 4 feet, it is important to consider the amount of feet you require when ordering. This levelling foot is adjustable, since it comes with the securing nut, adding longevity to the levelling foot and your appliance. To replace this foot, simply lift the corner of the pedestal from the floor, unscrew and remove the previous foot, and install the new foot, adjusting its height with the nut.

Installation Instructions

Linda from Arcadia, IN

missing parts on used washer and dryer pedstals

screwed on

hard to find parts - order on Thurs evening and got Sat - made problem really easy Read more...