Kenmore Dryer Filters

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Dryer Filters

Your Price
$52.47
  In Stock
Dryer Lint Filter
★★★★★
★★★★★
(115)
PartSelect Number PS3531962
Manufacturer Part Number ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Due to the changes, the manufacturer suggests changing the filter guide, part # MEA4905001 and filter cover, part # MCK66787901. The replacement of the entire component including the filter and surrounding area and guide simply involves the removal of a few screws and screwing the new parts back into place.
Fixes these symptoms
  • Door won’t close
  • Marks left on clothes
  • Takes too long to dry
  • See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. Read more...
Your Price
$49.75
  In Stock
Lint Filter
★★★★★
★★★★★
(83)
PartSelect Number PS1491676
Manufacturer Part Number W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which can be a fire hazard. Continue to check often to make sure the filter and slot are both cleared of lint.
Fixes these symptoms
  • Door won’t close
  • Marks left on clothes
  • No heat or not enough heat
  • See more...
Installation Instructions
JEFFREY from FALL RIVER, MA
felt strip came off lint screen
ordered new lint screen, removed old screen, inserted new screen. Read more...
Your Price
$22.44
  In Stock
Dryer Lint Filter Assembly
★★★★★
★★★★★
(67)
PartSelect Number PS3527575
Manufacturer Part Number 5231EL1001C
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your current lint filter with this part. The frame of this line filter is made of white plastic, and the filter is sold individually. To replace the filter, simply remove the old, damaged filter, and replace it with the new one.
Fixes these symptoms
Installation Instructions
Gene from COLUMBIA, SC
Dryer would not dry clothes
The customer support received from the this site individual. Was professional and very helpful. The video they recommended want me to the replacement part (Thermistor Ntc) step-by-step thanks to this site I had no problem at all Read more...
Your Price
$41.59
  In Stock
Dryer Lint Filter
★★★★★
★★★★★
(51)
PartSelect Number PS3527578
Manufacturer Part Number 5231EL1003B
The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is not providing enough heat, or if it takes too long to dry, you may need to replace the lint filter. You should also replace the lint filter if you notice it is damaged during regular maintenance. Many of our customers have rated this repair as easy. To complete the repair, simply remove the old lint filter and replace it with the new one. You may want to use a flat head screwdriver to remove any residual lint before you install the new filter.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
Sheryl from SPRINGFIELD, MO
Dryer not heating
I followed video instruction in disassembling and set screws from each section into diferent small bowls in the order they were removed. Hardest part was some of the screws were really hard to get loose without stripping them and my control panel did not match video but I figured it out. Replacing the parts were easy and putting it back together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old woman fixed the problem and dryer runs like new. Read more...
Your Price
$49.25
  In Stock
Dryer Lint Filter and Cover
★★★★★
★★★★★
(39)
PartSelect Number PS11726200
Manufacturer Part Number W10828351
Cover and filter as an assembly. It is used in dryer, If the lint filter cover is damaged or cracked, it should be replaced.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
Installation Instructions
Kevin from Seattle, WA
lint filter screen was broken
replace lint filter with new part. Great service and quick delivery! Thanks! Read more...
Your Price
$32.71
  In Stock
Lint Filter
★★★★★
★★★★★
(63)
PartSelect Number PS11741777
Manufacturer Part Number WP349639
This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
gregg from castaic, CA
worn out lint filter
The new lint filter fits perfectly,however because the handle is much larger than the original it does not allow the filter to close completely...causing a small amount of lint to acummulate on the dryer top. Read more...
Your Price
$37.99
  In Stock
Lint Filter
★★★★★
★★★★★
(46)
PartSelect Number PS11722097
Manufacturer Part Number 339392V
This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
Diane from Rancho Cucamonga, CA
Needed new Lint Filter for Dryer
Went to 3 big appliances stores - Not one carried any type of Lint Filter for Dryer. Went on line & typed in Lint Filter for Dryer in search bar. Part Select came up. Went thru site to ordering - Part Select made so easy to order. You just type in your Manufacture name & they instruct you step by step how to find model number & type of filter you need. So Easy. Very economical. I ordered & within 4 days I had my filter. I used 7-14 day delivery & was so pleased I had my filter within 4 days. Parts Select sent me email verifying my order as well as email when the part shipped.
Wonderful Customer Service. I will definitely use Part Select for any need part on any appliance.
Easy - Economical & One Stop Shopping. Love it
Read more...
Your Price
$56.64
  In Stock
Lint Filter
★★★★★
★★★★★
(20)
PartSelect Number PS2349312
Manufacturer Part Number 134793600
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 inches long x 11 inches high. It has a plastic frame and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup or lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. But if the filter is damaged, worn, or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Fixes these symptoms
Installation Instructions
Yvette from RUTHER GLEN, VA
Lint filter unusable due to age
Inserted lint filter into slot.
Replacement is exact match to original filter.
Read more...
Your Price
$21.14
  In Stock
Lint Filter
★★★★★
★★★★★
(10)
PartSelect Number PS417841
Manufacturer Part Number 131450300
Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Fixes these symptoms
  • Marks left on clothes
  • Takes too long to dry
  • See more...
Installation Instructions
Jeff from Bethalto, IL
lint filter did not fit "squarely" into its place
replaced old filter, only to find that the new one had the same issue. After closer examination, I determined the filter guide that screws into place, which I had removed earlier to clean lint out, did not hold the lint casing correctly. I removed and reinstalled the piece that has the metal moisture sensors, and replaced it, ensure both screws held the lint casing as it should. Now I have two lint filters that fit perfectly! So, if you ever remove the piece wtih the metal sensors, make sure that the lint casing is screwed in correctly when replacing. Read more...
Your Price
$42.69
  In Stock
Lint Filter
★★★★★
★★★★★
(15)
PartSelect Number PS11731421
Manufacturer Part Number W10859086
This is the replacement lint screen for your dryer. It is made of plastic and is approximately 14 inches by 9 inches. The lint screen traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint screen is cracked or clogged, the dryer takes too long to dry, or excessive lint is accumulating inside the dryer or its venting, you may need to replace it. Simply remove the old, damaged filter, and replace it with the new one.

Related Parts