LG/LG_Thumb/B0A3CBF08457F0F6CB23A1207D9126E0BAE18C99.gif.gif
See part K320 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Lint Screen Housing

★★★★★
★★★★★
16 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS3534930
Manufacturer Part Number MCK49049101
Manufactured by LG
You May Also Need?
Product Description

Lint Screen Housing Specifications

This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# MCK49049101 replaces these:
AP5071745, MCK49049101
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Gene
    February 13, 2020
    Had an issue where the link filter was catching clothes. I thought it was the dryer lint filter so i purchased that but it doesn't sit well in the existing piece. I read something i may need to also change the lint filter cover or a guide? Do i need all three parts or what do i need for it to sit correctly in the channel opening.
    For model number dlex3370v
    Hello Gene, thank you for your question. Due to the changes, the manufacturer suggests changing the filter guide, part # MEA4905001 and filter cover, part # MCK66787901 for it to fit properly. I hope this helps.

    13 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jerome
    November 20, 2017
    Looking to replacing the identification guide on both the LG washer and dryer. Dlgx3471w and wm3470hwa. On both units, the words that describes the positions have smeared or have vanished from spilled fluids. I would like to purchase all decals for both units. Great appliances, very happy except for the decals. How do i get these?
    Hi Jerome, Thank you for the question. The Control Panel for the DLGX3471W is PartSelect Number PS7788614. The WM3470HWA Control Panel is Part Number: PS3639887. Good luck with the repair!

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Dionne
    January 5, 2022
    The lint filter in my dryer melted in the corner and the piece that it sits in has a piece broken off. This is causing all of my clothes to get caught and ripped. I know I need a new lint filter and guide. Is there anything else I need? Also, could you please send me the model numbers of the pieces I need so I make sure to get the correct ones? Thank you
    For model number DLEX3570V
    Hi Dionne, Thank you for your question. The part number listed under your model number for the lint filter is PS3531962. The part number listed for the lint screen housing is PS3534930. You may also need the filter cover. The part number listed for it is PS3648317. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Edward
    June 27, 2021
    Does the Lint Screen Housing (part number MCK49049101) come with the screws to attach it to the dryer (I lost one removing the old housing). If not what is the part number of the replacement screw?
    For model number 79681028900
    Hello Edward, Thank you for the question. The Screws are not included unfortunately and are not showing as something we carry. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Laura
    July 7, 2022
    Lint screen partially melted and holder likewise damaged. Which seems to be a common issue. What parts of the new design are required to fix this?
    For model number DLGX3701W
    Hello Laura, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3531962 for the Filter. PartSelect Number PS3535278 for the Filter Guide and PartSelect Number PS3648317 for the Filter Cover. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.3 / 5.0, 7 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Filter parts chipped - replaced
        Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
        Other Parts Used:
        Filter Guide Dryer Lint Filter
        • David from Annapolis, MD
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        39 of 70 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Lint filter and cover guide melted which was ripping up some clothes
        Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done.
        Other Parts Used:
        Dryer Lint Filter
        • Kevin from FARMINGVILLE, NY
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        13 of 19 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Lint screen and frame was torn up
        Was initially going to order just the lint screen. Manufacturer notes said that there had been a redesign on that part so ordered all three pieces to ensure matching parts. On arrival it was just a matter of removing a few screws. Direct fit replacement!
        Other Parts Used:
        Filter Guide Dryer Lint Filter
        • Clifford from HUNTINGTN BCH, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        10 of 12 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        We have ruined hundreds and thousands of dollars the past decade on our LG typical detective lint filter!
        I watched a You Tube Video. It instructed me to take the top, front, and door off. Not necessary!!! But definitely unplug it as there is a moisture sensor attached inside this housing. Remove current Filter. Remove all screws holding the two key pieces in (Filter Cover and Guide). Disconnect the moisture sensor (mine is white wires connected to two metal prongs). Remove the Filter Cover and Filter Guide and discard. Get a long vaccum hose and remove all visible lint in the area below where the Filter Guide resides. Replace the Filter Guide and reconnect the moisture sensor, replace the Filter Cover. You may find it easier to snap these two pieces together before installing. Make sure the small plastic guides on the inside of the drum snap in tightly to the tei guide holes, then replace all screws. Note- Part Select does not send screws, so save your screws from the old parts and take note which are longer and go where. Tighten, but do not over tighten. If you were successful, the Filter Cover and Guide should be smooth with the edge of the drum and door. Install your new Filter, plug back in, and enjoy! I can FINALLY dry tank tops, open shoulder, and key hole tops, as well as sheets without my dryer eating them. Only problem is that I wish I had done it sooner. Note, I'm a female with no electrical or appliance repair experience. I did this on my lunch break and surprised my husband when he got home! Easy peasy!
        Other Parts Used:
        Filter Guide Dryer Lint Filter
        • Stephanie from CLINTON, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        10 of 10 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        We needed a new lint filter and housing guide
        My only issue was that I paid almost $30 for overnight shipping , and Part Select only sent two of the three pieces overnight. I had to wait several more days for the final piece. When I asked that they refund the expedited shipping charge, I never got a response. Would probably go with another company next time.
        Other Parts Used:
        Filter Guide Dryer Lint Filter
        • Helen from FORT WORTH, TX
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broken filter and holder
        I didn't get to do the repair because despite the model number and the picture being exactly what I needed I was shipped the wrong part and basically told by pets select to shake it off that's your problem not ours.
        Other Parts Used:
        Dryer Lint Filter
        • Darryl from GOODYEAR, AZ
        • Difficulty Level:
          Very Difficult
        • Total Repair Time:
          More than 2 hours
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Original lint housing has damage that causes clothes to get caught and tear up
        Able to complete install but the lint housing does not allow the lint screen to slide down completely due to the housing lacking the appropriate cut outs/notches. The slit becomes too narrow for the lint screen so it protrudes from the sides. The delivered product does not match the image on the item description, which shows the proper cut outs/notches that should fully accommodate the lint screen.
        I'm having a similar experience with this reviewer:

        John S - February 14, 2022
        Verified Purchase
        Lint screen housing
        The housing will not allow the lint screen to set completely down because the housing lacks the proper cut outs causing the lint screen to set 1-1.5 inches too high. I was able to cut out the required notches in the plastic so that the lint screen would fit. The picture shows the proper notches but the delivered product didn’t have the notches and does not match the picture.

        Will return the item and keep searching for the correct lint housing.
        • Justin from VANCOUVER, WA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          16 Reviews
          4.7
          Filter By Rating:
          • 5 Stars
            13
          • 4 Stars
            2
          • 3 Stars
            0
          • 2 Stars
            1
          • 1 Star
            0
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Related Parts
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS3534930
          Manufacturer Part Number: MCK49049101
          Brand
          Model Number
          Description
          LG
          48231010009
          Dryer
          LG
          48231010030
          Dryer
          Kenmore
          79680512900
          Dryer
          Kenmore
          79680518900
          Dryer
          Kenmore
          79681022900
          Dryer - Kenmore Dryer
          Kenmore
          79681028900
          Dryer
          Kenmore
          79681029900
          Dryer
          Kenmore
          79681182310
          Dryer - DRYER
          Kenmore
          79681282310
          Dryer - DRYER
          Kenmore
          79681283310
          Dryer - DRYER
          Kenmore
          79681382410
          Dryer - DRYER
          Kenmore
          79681383410
          Dryer - DRYER
          Kenmore
          79681532110
          Dryer
          Kenmore
          79681538110
          Dryer
          Kenmore
          79681538210
          Dryer - Kenmore Dryer Model 796.81538210 (79681538210, 796 81538210) Parts
          Kenmore
          79681542110
          Dryer
          Kenmore
          79681548110
          Dryer
          Kenmore
          79681549110
          Dryer
          Kenmore
          79681582410
          Dryer - Dryer
          Kenmore
          79681583410
          Dryer - Dryer
          Kenmore
          79681722010
          Dryer
          Kenmore
          79681728010
          Dryer
          Kenmore
          79682192900
          Dryer
          Kenmore
          79682198900
          Dryer
          Kenmore
          79682199900
          Dryer
          Kenmore
          79690512900
          Dryer
          Kenmore
          79690518900
          Dryer
          Kenmore
          79691022900
          Dryer
          Kenmore
          79691028900
          Dryer
          Kenmore
          79691029900
          Dryer

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service