Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 79681029900

79681029900 Kenmore Dryer - Overview

Get Parts and Repair Help for 79681029900

If you know the dryer repair part you need, you can browse the list of all parts on the 79681029900, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$32.77

Drum Support Roller

This part is sold individually. The drum support roller is found in your dryer. It is used to hold the drum in place in the cabinet while letting the drum rotate on the support rol...

Order within the next 1 hr and 25 mins and your part ships today!
$30.05

Lint Filter

The lint filter is designed for use in your dryer. The function of the lint filter is to catch lint and debris during the operation of the dryer. If your old lint filter is old or damaged, or there are marks left on your clothes at the end of the dry cycle, you will need to replace it with this part. This part is approximately 12 inches in width by 11 inches in height. Many of our customers have rated this repair as very easy. To complete the repair, simply remove the old filter, clean up any remaining lint and debris, and install the new filter. NOTE: As per manufacture - due to a redesign you MAY also have to change the cover and filter guide.

Order within the next 1 hr and 25 mins and your part ships today!
$5.72

Sensor

The sensor controls the temperature in your dryer and will turn off once your clothes have reached the desired dryness level. If you notice that your dryer is not giving off enough...

Order within the next 1 hr and 25 mins and your part ships today!
$15.54

Thermal Fuse

This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start. These fuses cannot be reset, so if yours has blown, you will need to replace it. A common reason for the thermal fuse to blow on a dryer is if the exhaust vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and stop the electricity from flowing to the gas valve or heating element.

Order within the next 1 hr and 25 mins and your part ships today!
$15.54

THERMOSTAT

The thermostat is a part for your dryer, and it is roughly 1 inch long by roughly 1.5 inches wide. The purpose of the thermostat is to measure the temperature of the air inside you...

Order within the next 1 hr and 25 mins and your part ships today!
$17.98

Thermistor,NTC

This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes too long to dry, then the thermistor might be defective or damaged. This can cause a fault code and could begin either prolonging or shortening drying time. As a safety precaution, make sure to unplug the dryer from the power source before beginning this installation, and wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.

Order within the next 1 hr and 25 mins and your part ships today!
$26.70

BELT,POLY V

This dryer belt helps rotate from the drive motor to the drum. It is located between the motor and the tub. If you notice that your dryer is noisy or is not tumbling this could be ...

Order within the next 1 hr and 25 mins and your part ships today!
$32.77

Cover,Guide

Order within the next 1 hr and 25 mins and your part ships today!
$11.85

Guide,Filter

Order within the next 1 hr and 25 mins and your part ships today!
$143.18

Heating Element Assembly

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer

Order within the next 1 hr and 25 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Filter parts chipped - replaced

  • Customer: David from Annapolis, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 17 of 39 people found this instruction helpful
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. read more

Lint filter and cover guide melted which was ripping up some clothes

  • Customer: Kevin from FARMINGVILLE, NY
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 9 people found this instruction helpful
Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done. read more

Light bulb in dryer burndt

  • Customer: Duane from TROY, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Removed cover replaced bulb read more