My Orders
Kenmore Dryer Hinges
GET YOUR OFFICIAL Kenmore PARTS TO ENSURE VICTORY
Popular Kenmore Dryer Hinges
This dryer door hinge assembly supports the door, allowing it to pivot smoothly for easy access to the drum. As a genuine OEM component, it ensures reliable performance and helps maintain proper door alignment. It is designed to replace worn or broken hinges that may cause the door to close improperly, slam shut, or leave gaps that allow lint to escape. Installation typically involves removing the old hinge and securing the new one in place using existing hardware. Before ordering, confirm compatibility with your specific dryer model, as hinge designs may vary slightly.
This dryer door hinge assembly supports the door, allowing it to pivot smoothly for easy access to the drum. As a genuine OEM component, it ensures reliable performance and helps maintain proper door alignment. It is designed to replace worn or broken hinges that may cause the door to close improperly, slam shut, or leave gaps that allow lint to escape. Installation typically involves removing the old hinge and securing the new one in place using existing hardware. Before ordering, confirm compatibility with your specific dryer model, as hinge designs may vary slightly.
Installation Instructions
Raul from CYPRESS, CA
Dryer door hinge broke.
Followed YouTube video repair process. The only problem is that the door hinge has plastic bushings attached. A couple broke and the parts listing does not show the bushings, nor does the hinge come with them. The door is a bit loose without them. Nonetheless, the repair did the job for now.
This door hinge is used to hold your door on your dryer in place. Most dryers require two and they are sold individually.
This door hinge is used to hold your door on your dryer in place. Most dryers require two and they are sold individually.
Installation Instructions
Jennifer from Davenport, IA
Door would not stay shut
Simply took door off, four screws. Laid on table top and removed several other screws to get to the inside. Removed latch and replaced. Replaced srews and put door back on. I'm sure I saved us a bunch on a service call. Oh did I mention I'm a mom with a 2 and a 4 year old running around while I did this repair. Back in business now.
This door hinge is for dryers.
Door hinge supports the dryer door on the front panel and allows the door to pivot open and closed.
Wear work gloves to protect your hands when installing this part.
This door hinge is for dryers.
Door hinge supports the dryer door on the front panel and allows the door to pivot open and closed.
Wear work gloves to protect your hands when installing this part.
Installation Instructions
Kathy from Payette, ID
Door hinge very loose
Watched a YouTube video. Very easy to replace, I’m 73 year old woman…this was a very easy job, anyone can do it!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is the bearing for the lid hinge. Sold individually.
This is the bearing for the lid hinge. Sold individually.
Installation Instructions
Enrique from Miami Shores, FL
spin cycle did not activate
Replaced hinge switch. Still no spin cycle. Noticed hinge bearing cracked & if hinge forced into switch, spin activated. Ordered new hinge bearings.Spin cycle still didn't engage. On further examination, observed that hinge was bent. Straightened hinge & worked like a charm. Didn't really need new switch or bearings. NOTE : Avoid having w
... Read more
asher door bang shut.Took longer than expected, but each procedure was simple.
Read less
Sold individually.
Sold individually.
Installation Instructions
Robert from CUMMING, GA
Top hinge on clothes dryer separated, leaving door difficult to open/close
Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??
This part attaches the door to the front panel of your dryer.
This part attaches the door to the front panel of your dryer.
Installation Instructions
Thomas from Fredericksburg, VA
Door Hinge Failure Right Side
Unplug dryer, remove two screws in lint screen door, using a pry bar or stiff putty knife, gently pry up on both front corners to release the clips holding the top down. Use a 5/16" nut driveer two remove the two screws inside at the top of the front of the dryer, remove the two wires on the door switch. Open door enough to get your hand
... Read more
in to support the drum, now lean the front out at the top and let the drum rest. Grasping the front at the top on both sides gently lift up to release the clips securing the bottom front. Release the door springs,open door and replace the hinges. Reverse to reassemble.
Read less
