Kenmore Dryer Igniters

Videos!

Your Price

$32.63

Kenmore Dryer Igniter Kit

★★★★★

43 Reviews

PartSelect Number PS334180

Manufacturer Part Number 279311

If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-inch flat igniter, bracket, 4-inch wire leads, and the plug. The kit can replace both round and flat igniters and is used for many gas clothes dryers. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is located within the burner assembly, so you will require tools to complete the repair. You will need a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet.

Fixes these symptoms

Not Heating
See more...

Installation Instructions

TEODY from MILPITAS, CA

No Heat. Dryer keeps running but no heat to dry clothes.

Repair was very easy. We are in the internet age so I use it all the time to get info on how to repair any thing in the house including cars. This time it was my dryer. I typed up 'Kitchen Aid dryer has not heat'and pressed searched and PartSelect came up. Typed in the model number and looked up the comments on No Heat. They had pretty cool site that shows videos on how to repair this things too. Came to conlclusion that the THERMAL FUSE was the main problem. Ordered it and as well as the Igniter assy just to make sure and as well as save on the shipping just in case. Ordered on Sunday night and the shipped the next day. It arrived on Tuesday. Unfortunately had a little problem on the shipment. Called PartSelect and they are so awesome they shipped me new parts asap at no extra charge. Awesome Awesome! Parts came in Thursday and first installed the Thermal Fuse and BAAAM! problem solved. Did not need the igniter assembly. Now I have an extra part in storage.
To replace the Thermal fuse.
1. Disconnect Dryer from power outlet. Remove the bolts on the back panel with a 1/4" socket. I used power drill because it is much faster.
2. Locate the Thermal Fuse. Disconnect wires and remove the bolt. Slide it up and pull. Install the new one and reconnect the wires. Replace the panel and plug the dryer.

That solved my problem. It should solve yours too. The whole process was less than five minutes. Read more...

Your Price

$125.62

Kenmore Dryer Gas Igniter

★★★★★

3 Reviews

PartSelect Number PS3527801

Manufacturer Part Number 5318EL3001A

This spiral-style gas burner igniter is designed for use in select gas dryers and plays a crucial role in generating the heat needed to dry clothes. Operating at 120 volts, the igniter glows red hot during the drying cycle to ignite the gas that heats the drum. If your dryer runs but fails to produce heat, the igniter may be faulty and should be replaced. The assembly includes the igniter, bracket, wire harness, and plug for straightforward installation. Always disconnect the dryer from power before beginning any repairs to ensure safety.

Fixes these symptoms

Not Heating
See more...

Installation Instructions

Barbara from CUDAHY, WI

no heat

I replaced the thermistor, then the gas ignitor which were easy to get to once the drum was out. The gas is still not igniting so not sure where to go from here. Putting the drum belt back on took some muscle. But then I'm 71. Read more...

Your Price

$115.08

Kenmore Dryer Igniter

PartSelect Number PS7783954

Manufacturer Part Number 137524000

Introduce a reliable solution for your dryer with this genuine Frigidaire IGNITER Dryer Igniter Assembly. Equipped with a mounting bracket and wire harness connector, this OEM part is a certified fit compatible with specific models of Frigidaire, Electrolux, White Westinghouse, and Tappan dryers. The integrated burner igniter ensures efficient lighting of the gas burner to heat your dryer throughout the cycle. Remember to disconnect the power before installing this part and protect your hands with work gloves. Please ensure that your model number is accurate prior to purchase, as parts may vary slightly in size and shape. Add dependability and efficiency to your appliance repair tasks with this Frigidaire Dryer Igniter Assembly.

Fixes these symptoms

Not Heating
See more...

Your Price

$150.82

Kenmore Dryer Burner Igniter

★★★★★

1 Review

PartSelect Number PS12585650

Manufacturer Part Number 5304517325

Burner igniter 5304517325 lights the gas burner to heat the dryer during the cycle. Disconnect the power before installing this part. Wear work gloves to protect your hands.

Installation Instructions

Christopher from MEDFORD, MA

No flame, no heat

I recently ordered parts for a gas dryer, Frigidaire GLGQ2152 ES3. When I received an igniter part number PS12585650 order number 14700077, the igniter was broken when I opened the box. I believe what happened is that the new metal bracket was wrapped in the bubble wrap along with the igniter. I called customer service and was setup to return the igniter which I did. Also, I ordered a second igniter. I receive the second one and it wasn't broken and the bracket was outside the bubble wrap during shipment.

As far as the installation of the "replacement" igniter into the gas dryer, I could not find instructions on how to install it. The received igniter is much different than the original. There was a small instruction sheet stating that the new igniter is different but can be installed using the new bracket that came with the igniter. But again there were no instructions on how to do this. It took me great effort to figure out how to do this.

The old igniter had to be removed by removing the old bracket assembly that the igniter was mounted on. The new igniter had to be installed onto the new bracket and then by sliding the new assembly under the old assembly, the screws were reinstalled. Although the holes where the original screws were to be screwed into were too small, they had to be drilled out. There was no hardware (screws) to install the "replacement" igniter onto the shipped bracket.

After much work, I finally got the new igniter installed (without breaking it) with the new bracket and the dryer is back in operation. Read more...

Your Price

$66.77

Kenmore Dryer Igniter

★★★★★

1 Review

PartSelect Number PS900236

Manufacturer Part Number 5303937186

The burner igniter is used in dryers and activates or lights the gas burner to heat the dryer during a cycle. *Please note: Do not handle this igniter by the gray part, because it is fragile. If your dryer is producing no heat, not enough heat, or it will not start, replacing this part may be the solution. Tools required for this repair project are: putty knife, screwdriver, and wrench. Remember to unplug your appliance from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.

Installation Instructions

Dirk from Sonoma, CA

dryer won't stay hot, gas smell

Pulled unit out from wall to access back panel. Top needs to be removed to get to the screws that hold on the front panel and door. These need to be removed to get to the valve and burner.

Once your in, the sensor, thermostat, and igniter are right up front. Sensor and thermostat were easy, the igniter breaks very easily...how do I know? Cause I broke the one I bought and had to get a new one.

I also replaced the coil set for the gas valve, because I had read that they can go bad and cause a gas fume smell. The coils are cheap, so you may as well as do them at the same time.

Anyway, once the repair was complete, I reassembled the unit and hooked up the vent.

Runs like new, and the clothes dry quickly. Read more...

Your Price

$235.95

Kenmore Dryer Gas Burner Valve Assembly With Igniter

★★★★★

2 Reviews

PartSelect Number PS988403

Manufacturer Part Number 280119

Experience a fully functional and efficient dishwasher with our genuine Frigidaire Sump Gasket. This key part creates a waterproof barrier between your dishwasher's tub and the pump assembly, ensuring your dishwasher operates at peak efficiency. It?s precisely what you need when you want your beloved appliance to feel just like new. Primarily fitting select models from Frigidaire, Electrolux, White Westinghouse, and Tappan, this original replacement part helps guarantee the continuous and smooth operation of your dishwasher. Just remember to safely disconnect your dishwasher from its power source and water supply before installation. Wearing work gloves is also a good idea for your protection during the installation process. So, let's get your dishwasher back to its best condition with our hard-wearing and dependable Frigidaire Sump Gasket. Trust us to bring you durable, easy to install, and high-quality solutions to meet your appliance repair needs.

Installation Instructions

Carlton from Marrero, LA

Clothes not drying

Turned off gas supply and disconnected gas line and disconnected vent. Removed old burner and replaced with new burner assembly, reconnected gas line and vent and tested, worked fine. Read more...

Your Price

$178.89

Kenmore Dryer Igniter Heater

PartSelect Number PS4205220

Manufacturer Part Number DC47-00022A

Enhance your Samsung dryer's performance with this top-tier Heater Igniter. Designed to light the gas burner to execute the drying cycle efficiently, this piece represents a remarkable mix of durability and effortless installation. The usage of high-grade materials in its construction ensures long-term usability and results in fewer machine breakdowns. This burner igniter is an excellent selection if you are considering a part replacement. Remember, safety first; disconnect the power before beginning the installation and always use work gloves to protect your hands. Trust this robust component to re-ignite your dryer's efficiency.

Installation Instructions

William from MIDLAND, MI

No heat when drying, no flame.

This was a troubling exercise. Took apart the dryer covers and removed the drum. Removed the igniter and it had a crack through it. Checked with multimeter for continuity, and there was none. Took a picture of the original installation and sent away for part. Just mount and plug in….reassembled and works fine. Read more...