The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes | Door won’t close
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# ADQ56656401 replaces these:
AP4457244, 1462822, ADQ56656401, ADQ56656401
Customer Reviews
Average Rating:
★★★★★
★★★★★
153 Reviews
4.7
Filter By Rating:
5 Stars
133
4 Stars
9
3 Stars
2
2 Stars
5
1 Star
4
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Susan D - December 2, 2024
Verified Purchase
Lint Dryer Screen
Great product. Fits perfect. Got here quickly!
★★★★★
★★★★★
Susan M - November 28, 2024
Verified Purchase
Fit and does the job
The old lint filter stuck up at one end and snagged and sometimes ripped the clothes. This fit perfectly and no more worries
★★★★★
★★★★★
Kathleen P - November 6, 2024
Verified Purchase
Perfect fitting filter
Easy repair… my dryer is back in perfect working order
★★★★★
★★★★★
JASON O - September 12, 2024
Verified Purchase
Did not work as expected
After a few days part was torn and broken.
★★★★★
★★★★★
Joseph M - May 22, 2024
Verified Purchase
Easy repair. Part was identical replacement part
Second one time I used parts direct. Both good experience.with part being exact replacement and good quality
★★★★★
★★★★★
Miriam T - March 10, 2024
Verified Purchase
Works perfectly
Thanks!
★★★★★
★★★★★
Patti E - November 29, 2023
Verified Purchase
Perfect fit
Timely delivery
★★★★★
★★★★★
Annemarie M - November 28, 2023
Verified Purchase
Lint filter
Wonderful customer service. The part fit perfectly!
★★★★★
★★★★★
Kathryn K - October 11, 2023
Verified Purchase
great repair for my dryer
great condition and was mine in 48 hours.
★★★★★
★★★★★
Patricia G - July 19, 2023
Verified Purchase
Just what I needed.
I do not understand why they warp after several years of use and then I have to buy a new one!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 14 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The mesh was ripping away from the frame on the dryer filter
Ordered a new one and installed it in a matter of seconds. Not difficult!
Carla from CHARLOTTE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter and housing needed replacement
Parts did NOT fit together well. Because plastic, didn't want to force the pieces together and break them. Ended up calling appliance repair and even he had some difficulty getting it all together and back into the dryer.
Lint Screen Housing broke causing damage to clothing
Could not do repair since the parts that I ordered were different from the picture on this site. I have emailed them to which they replied with one email asking for some info. I sent that to them and have not heard anything back in the last 3 weeks. I have even sent reminder emails and still nothing. I can't use my dryer due to damagin
... Read moreg clothing and can't replace parts due to being the wrong part. Partselect is not very good at getting answers for their customers. Expert repair help is something i don't think they have. Getting some answers would go a long way but i feel like i have been left in the dark.
I put the dryer information into my browser and found PartSelect had the exact replacement part I needed. I ordered the part and it came is just a few days. I removed the part from the excellent packaging, removed the cracked lint filter from the dryer, replaced it with the new lint filter and done! Among things I've successfully r
... Read moreepaired, this was the easiest and best job I've ever done. Quick, Easy and painless. Thanks for asking!
Read less
David E from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken filter and holder
I didn't get to do the repair because despite the model number and the picture being exactly what I needed I was shipped the wrong part and basically told by pets select to shake it off that's your problem not ours.
My only issue was that I paid almost $30 for overnight shipping , and Part Select only sent two of the three pieces overnight. I had to wait several more days for the final piece. When I asked that they refund the expedited shipping charge, I never got a response. Would probably go with another company next time.
The lint dryer filter was not fitting in correctly so it sticks out a bit and while clothes are drying it was catching it and ripping/twisting and damaging all my clothes
I bought the whole dryer filter kit, but turns out I only needed the dryer filter and am very happy about that. No tools necessary I just slid it right in. It fit perfectly and I no longer have anxiety about my clothes coming out ripped.
Luciana from PRT WASHINGTN, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
24 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Former lint trap would catch clothes in dryer and rope them together
Pulled out old lint trap and installed new one in its place
Brian from LOCKPORT, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We have ruined hundreds and thousands of dollars the past decade on our LG typical detective lint filter!
I watched a You Tube Video. It instructed me to take the top, front, and door off. Not necessary!!! But definitely unplug it as there is a moisture sensor attached inside this housing. Remove current Filter. Remove all screws holding the two key pieces in (Filter Cover and Guide). Disconnect the moisture sensor (mine is white wires connec
... Read moreted to two metal prongs). Remove the Filter Cover and Filter Guide and discard. Get a long vaccum hose and remove all visible lint in the area below where the Filter Guide resides. Replace the Filter Guide and reconnect the moisture sensor, replace the Filter Cover. You may find it easier to snap these two pieces together before installing. Make sure the small plastic guides on the inside of the drum snap in tightly to the tei guide holes, then replace all screws. Note- Part Select does not send screws, so save your screws from the old parts and take note which are longer and go where. Tighten, but do not over tighten. If you were successful, the Filter Cover and Guide should be smooth with the edge of the drum and door. Install your new Filter, plug back in, and enjoy! I can FINALLY dry tank tops, open shoulder, and key hole tops, as well as sheets without my dryer eating them. Only problem is that I wish I had done it sooner. Note, I'm a female with no electrical or appliance repair experience. I did this on my lunch break and surprised my husband when he got home! Easy peasy!
Ask our experts a question about this part and we'll get back to you as soon as possible!
85 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lon
December 11, 2017
The removable lint filter has warped at one end and periodically can catch clothes as they spin. What part number(s) do I need to replace this filter. Looking at some posts it seems that depending on the model it's recommended you also replace other parts as well because of a redesign.
For model number DLEX2801R
Hi Lon, Thank you for the question. You will need to replace the filter, PartSelect Number PS3531962. They also suggest replacing the cover and the guide at the same time due to a redesign of the filter. Part # for Cover is PS3534930 and Guide is PS3535278. Hope this helps
41 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
October 9, 2017
I am trying to find a lint filter for my LG dryer, but when I looked for the above model number I got a message that said the one they listed would work with my dryer. Yes? Or no?
For model number DLEX3470V
Hello,
Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3531962. They also suggest replacing the cover and the guide at the same time due to a redesign of the filter. Part # for Cover is PS3534930 and Guide is PS3535278.
Hope this helps!
22 people found this helpful.
Was this helpful?
Thank you for voting!
Loretta
March 7, 2018
I need a new dryer lint filter. What part # do I use? And do I need to buy new housing for this filter to fit dryer with s/no:604kwhx2m481?
For model number DLEX3370V
Hello Loretta, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3531962 for the filter and as per manufacture due to a redesign you also have to change the cover and filter guide.Part # for Cover is PS3534930 and Guide is PS3535278.Good luck with the repair!
Hi..i want to purchase a new lint filter for my dryer. it says you have the part but i have to change the filter guide as well? is that something i need to purchase? i've had this dryer for at least 4-5 years. thank you.
For model number DLGX38762
Hello Dana, thank you for your question. Yes, the filter is part number ADQ56656401 and you do have to change the filter guide as LG has made changes to the filter and it need the corresponding filter cover and guide. The cover is part number MCK49049101 and the guide is MEA49050001. Please enter the part number into the site for current price and availability. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
ERNEST JR
October 23, 2017
The serial number on my dryer is sn904kwta00033. Will i need to replace anything else when replacing a warped lint filter?
For model number DLEX3001W
Hi Ernest Jr,
Thank you for your question. No, you should not need to replace anything else. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 5, 2017
I need a new lint filter (cracked) do i need a new filter guide the existing one is fine. What is the difference from the guide and cover?
For model number DLGX3371V
Hi Gary,
Thank you for your inquiry. I your filter guard is fine then you do not need to replace it. The guide is the part where the lint filter goes into and the cover provides protection for the filter. I hope this helps.
Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Will
January 3, 2018
I need to replace the lint filter (i believe part k310), but all of the replacement recommendations online have a different blocked corner on the lower corner. The original part is rounded on both lower corners. What part do i need to purchase to properly fit? Thx.
For model number DLEX3001R
Hi Will,
Thank you for your question. The lint filter listed under your model number is the correct part for you appliance and the lower corners of the lint filter have rounded edges. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
January 19, 2018
Looking to replace the lint filter because it’s damaged and it’s ripping clothes
For model number Kenmore 91382410 dryer
Hello Jeff, Thank you for your inquiry. This is the part number for the filter that is compatible to your model. Since it is a manufacturer update, you may also need the cover PS3534930 and filter guide PS3535278. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis Hoskins
January 26, 2018
I need part number for lint filter, drive belt, and drum rollers for LG dryer model dlex3360v s/n 009kwgg00863
For model number DLEX3360V
Hello Dennis, Thank you for your inquiry. The part number for the lint filter is ADQ56656401, the part number for the drive belt is 4400EL2001F, and for the drum rollers, the complete assembly with the shaft and retainers is part# 4581EL2002C, for just the roller the part number is 4581EL3001E. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roxanne
December 4, 2017
I already ordered a part from seneca river and it was too wide. It looks like from description your part is exactly the same size?
For model number DLG3051W
Hi Roxanne, Thank you for the question. According to the model number provided,the lint filter is PartSelect Number PS3531962. As per manufacture - due to a redesign you may also have to change the cover and filter guide.If this filter is to wide for the cover and guide on your appliance now these parts will also have to be replaced. Part Number: PS3534930 and Part Number: PS3535278. Good luck with the repair!
