This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# MCK49049101 replaces these:
AP5071745, MCK49049101
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
4.8
Filter By Rating:
5 Stars
17
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William G - February 15, 2024
Verified Purchase
Easy Repair
Replacement part worked perfectly, dryer is operational again.
★★★★★
★★★★★
Jane L - May 27, 2023
Verified Purchase
Good Dryer part and Saved money!
We had a dryer repair service company come to our house to help with a dryer error code. Service tech also noticed the lint screen housing was cracked and quoted $260 to replace. He had to order the part. We didn't get any type of follow up from the company and waited over a month. Then I went to YouTube and found how easy it seemed to replace the part ourselves. I ordered the part from PartSelect ($50ish), and our son installed it. Our son did have to work at getting the part lined up, but eventually it fit just fine, and looks like new. We did contact the repair company who seemed to know nothing about our order.
★★★★★
★★★★★
Enrique C - March 9, 2023
Verified Purchase
Great part fit good
Everything is fast and good condition
★★★★★
★★★★★
Daniel D - February 3, 2023
Verified Purchase
Easy repair
With parts select they help make v projects easy to do by providing the right part at a reasonable price
★★★★★
★★★★★
John S - February 14, 2022
Verified Purchase
Lint screen housing
The housing will not allow the lint screen to set completely down because the housing lacks the proper cut outs causing the lint screen to set 1-1.5 inches too high. I was able to cut out the required notches in the plastic so that the lint screen would fit.
The picture shows the proper notches but the delivered product didn’t have the notches and does not match the picture.
February 18, 2022
Hi John,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
★★★★★
★★★★★
Janet B - January 15, 2022
Verified Purchase
Dryer lint housing unit.
Was shipped and received quickly. Easy to install. ??
★★★★★
★★★★★
Andrew W - October 26, 2021
Verified Purchase
Part fits perfectly
My appliance works like new
★★★★★
★★★★★
Scott S - September 9, 2021
Verified Purchase
Just want I was looking for.
Great condition.
★★★★★
★★★★★
Patricia C - June 5, 2021
Verified Purchase
Worked perfectly
Your customer service person was wonderful.
★★★★★
★★★★★
Parthib S - March 18, 2021
Verified Purchase
Was a bit difficult to fit in, and it did not come with screws
We managed to replace the old broken part though and it is working fine
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 11 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Manufacturer has redesigned the filter and housing, so you have to get the updated parts in a set.
This has taken days to get the updated parts from another major international supplier. You can't just buy the screen or the housing - you have to get an updated set. Unfortunately they were not immediately available from PartSelect.
David from ALEXANDRIA, VA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter and housing needed replacement
Parts did NOT fit together well. Because plastic, didn't want to force the pieces together and break them. Ended up calling appliance repair and even he had some difficulty getting it all together and back into the dryer.
The lint screen that this company sent was 3x too large. I called to return/exchange it. No one available - go to customer service. I went to customer service and entered my email address and the order number (while I was looking at the original order1). The email and order number could not be found.
I am still wai
... Read moreting to hear from someone from the company to get a RMA and return label! Will NEVER use this company again. Vivien Joebchen
Read less
Vivien from CARLSBAD, CA
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint Screen Housing broke causing damage to clothing
Could not do repair since the parts that I ordered were different from the picture on this site. I have emailed them to which they replied with one email asking for some info. I sent that to them and have not heard anything back in the last 3 weeks. I have even sent reminder emails and still nothing. I can't use my dryer due to damagin
... Read moreg clothing and can't replace parts due to being the wrong part. Partselect is not very good at getting answers for their customers. Expert repair help is something i don't think they have. Getting some answers would go a long way but i feel like i have been left in the dark.
Original lint housing has damage that causes clothes to get caught and tear up
Able to complete install but the lint housing does not allow the lint screen to slide down completely due to the housing lacking the appropriate cut outs/notches. The slit becomes too narrow for the lint screen so it protrudes from the sides. The delivered product does not match the image on the item description, which shows the proper cu
... Read moret outs/notches that should fully accommodate the lint screen. I'm having a similar experience with this reviewer:
John S - February 14, 2022 Verified Purchase Lint screen housing The housing will not allow the lint screen to set completely down because the housing lacks the proper cut outs causing the lint screen to set 1-1.5 inches too high. I was able to cut out the required notches in the plastic so that the lint screen would fit. The picture shows the proper notches but the delivered product didn’t have the notches and does not match the picture.
Will return the item and keep searching for the correct lint housing.
Read less
Justin from VANCOUVER, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken filter and holder
I didn't get to do the repair because despite the model number and the picture being exactly what I needed I was shipped the wrong part and basically told by pets select to shake it off that's your problem not ours.
My only issue was that I paid almost $30 for overnight shipping , and Part Select only sent two of the three pieces overnight. I had to wait several more days for the final piece. When I asked that they refund the expedited shipping charge, I never got a response. Would probably go with another company next time.
We have ruined hundreds and thousands of dollars the past decade on our LG typical detective lint filter!
I watched a You Tube Video. It instructed me to take the top, front, and door off. Not necessary!!! But definitely unplug it as there is a moisture sensor attached inside this housing. Remove current Filter. Remove all screws holding the two key pieces in (Filter Cover and Guide). Disconnect the moisture sensor (mine is white wires connec
... Read moreted to two metal prongs). Remove the Filter Cover and Filter Guide and discard. Get a long vaccum hose and remove all visible lint in the area below where the Filter Guide resides. Replace the Filter Guide and reconnect the moisture sensor, replace the Filter Cover. You may find it easier to snap these two pieces together before installing. Make sure the small plastic guides on the inside of the drum snap in tightly to the tei guide holes, then replace all screws. Note- Part Select does not send screws, so save your screws from the old parts and take note which are longer and go where. Tighten, but do not over tighten. If you were successful, the Filter Cover and Guide should be smooth with the edge of the drum and door. Install your new Filter, plug back in, and enjoy! I can FINALLY dry tank tops, open shoulder, and key hole tops, as well as sheets without my dryer eating them. Only problem is that I wish I had done it sooner. Note, I'm a female with no electrical or appliance repair experience. I did this on my lunch break and surprised my husband when he got home! Easy peasy!
Was initially going to order just the lint screen. Manufacturer notes said that there had been a redesign on that part so ordered all three pieces to ensure matching parts. On arrival it was just a matter of removing a few screws. Direct fit replacement!
Lint filter and cover guide melted which was ripping up some clothes
Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done.
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gene
February 13, 2020
Had an issue where the link filter was catching clothes. I thought it was the dryer lint filter so i purchased that but it doesn't sit well in the existing piece. I read something i may need to also change the lint filter cover or a guide? Do i need all three parts or what do i need for it to sit correctly in the channel opening.
For model number dlex3370v
Hello Gene, thank you for your question. Due to the changes, the manufacturer suggests changing the filter guide, part # MEA4905001 and filter cover, part # MCK66787901 for it to fit properly. I hope this helps.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Jerome
November 20, 2017
Looking to replacing the identification guide on both the LG washer and dryer. Dlgx3471w and wm3470hwa. On both units, the words that describes the positions have smeared or have vanished from spilled fluids. I would like to purchase all decals for both units. Great appliances, very happy except for the decals. How do i get these?
Hi Jerome, Thank you for the question. The Control Panel for the DLGX3471W is PartSelect Number PS7788614. The WM3470HWA Control Panel is Part Number: PS3639887. Good luck with the repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dionne
January 5, 2022
The lint filter in my dryer melted in the corner and the piece that it sits in has a piece broken off. This is causing all of my clothes to get caught and ripped. I know I need a new lint filter and guide. Is there anything else I need?
Also, could you please send me the model numbers of the pieces I need so I make sure to get the correct ones?
Thank you
For model number DLEX3570V
Hi Dionne,
Thank you for your question. The part number listed under your model number for the lint filter is PS3531962. The part number listed for the lint screen housing is PS3534930. You may also need the filter cover. The part number listed for it is PS3648317. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Does the Lint Screen Housing (part number MCK49049101) come with the screws to attach it to the dryer (I lost one removing the old housing). If not what is the part number of the replacement screw?
For model number 79681028900
Hello Edward, Thank you for the question. The Screws are not included unfortunately and are not showing as something we carry. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Laura
July 7, 2022
Lint screen partially melted and holder likewise damaged. Which seems to be a common issue. What parts of the new design are required to fix this?
For model number DLGX3701W
Hello Laura, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3531962 for the Filter. PartSelect Number PS3535278 for the Filter Guide and PartSelect Number PS3648317 for the Filter Cover. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
How do I find the lint screen housing for this model?
For model number DLE1310W
Hello Mandy, Thank you for your inquiry. We have researched the model you have provided and show the lint filter fits between the guide cover and the guide. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Please provide part #s for replacement of lint filter, housing and guide 3 parts. I have tried and failed twice now with parts that don’t fit. From other providers
For model number Dlg2702v
Hello Karen, Thank you for your inquiry. We have researched the model number you have provided and show the compatible lint filter as part# PS3531962, the lint screen housing as part# PS3534930, and the guide as part# PS3535278. You may also need the holder, part# PS3524207. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Good morning, this part (part # PS3534930) actually fit my dryer; however, can this part be placed in the dish washer for cleaning? Thanks.
For model number DLEX3700V
Hello Taiwo, thank you for your question. We do not recommend putting any of the plastic parts from this dryer in the dishwasher. Always wash by hand with warm water. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Marisela
February 21, 2023
Hi!!
The corner of filter on the dryer broke and also the housing for it in the same corner, this causes clothes to get stuck and many times tear, what parts do I need to replace the whole section?
Thank you!!
For model number DLGX3701V
Hello Marisela, Thank you for your inquiry. Researching the model number that you have provided, the lint filter is PS3531962, the housing is part# PS3534930, the filter guide is PS3535278 and the cover is part# PS3648317. Good luck with your repair.
Hello Morgan, thank you for reaching out. The lint screen cover, part number PS3534930, can be removed quite easily. You just need to unscrew the three screws located at the back of the filter housing, inside the drum. After that, you can easily pull out the filter housing and replace it. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Cap or Lid","title":"Cap or Lid","url":"/Dryer-Caps-and-Lids.htm"},{"position":3,"name":"MCK49049101","title":"MCK49049101","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
