General Electric Range Drip Bowls

General Electric Appliance Parts
Shop By Part Type

Popular General Electric Range Drip Bowls

Your Price
$17.82
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(61)
PartSelect Number PS244394
Manufacturer Part Number WB31T10010
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.
Installation Instructions
John from San Ramon, CA
I needed new surface elements & burner bowls
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA Read more...
Your Price
$18.02
  In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(45)
PartSelect Number PS244395
Manufacturer Part Number WB31T10011
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fit your 8-inch burner. This bowl is used to catch drippings and food that falls when cooking on the oven element. The drip bowl might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When replacing the bowl, make sure to line up the hole with the terminal block where the element plugs into, and always remove power to your appliance and ensure it is completely cool before commencing your repair. These drip bowls are sold individually, not as a set for your appliance, so you will need to purchase each separately if upgrading all the drip bowls for your range.
Installation Instructions
Tom from North Prairie, WI
Burner bowls needed replacement
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3 Read more...
Your Price
$12.82
  In Stock
Burner Bowl - 8 Inch
★★★★★
★★★★★
(25)
PartSelect Number PS244399
Manufacturer Part Number WB31T10015
This part is located beneath the element and catches any spills.
Installation Instructions
Laura from Downingtown, PA
Our 12 year old oven bake element sparked and died on us
So easy, first I turned off the main switch to the electric. Unscrewed old bake element and screwed in the new one. Worked like a charm. We also bought from Part Select new burners and drip pans. Can't believe how good it looks. I placed my order on a Sunday and received it on Tuesday!! 2 days. Awesome website...Have told everyone about it..THANK YOU PART SELECT.. Read more...
Your Price
$7.08
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(17)
PartSelect Number PS244677
Manufacturer Part Number WB32X10012
This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.
Installation Instructions
Cynthia from Tampa, FL
Needed to replace Drip Pans and Trim Rings for old stove
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts.
Read more...
Your Price
$16.13
  In Stock
Burner Bowl - 6 Inch
★★★★★
★★★★★
(1)
PartSelect Number PS244398
Manufacturer Part Number WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in diameter. It can be found beneath the element and catches spills. If your old burner bowl is damaged or missing, you may need to replace it with this part.
Installation Instructions
Laura from Downingtown, PA
Our 12 year old oven bake element sparked and died on us
So easy, first I turned off the main switch to the electric. Unscrewed old bake element and screwed in the new one. Worked like a charm. We also bought from Part Select new burners and drip pans. Can't believe how good it looks. I placed my order on a Sunday and received it on Tuesday!! 2 days. Awesome website...Have told everyone about it..THANK YOU PART SELECT.. Read more...
Your Price
$20.50
  In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(22)
PartSelect Number PS244697
Manufacturer Part Number WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with rolled, terminal-style plug-in surface element units. The drip bowl is located beneath the surface element, so you will need to remove the element prior to swapping out the old drip bowl for a new one. Many of our customers have rated this repair as easy, and you will not require any tools to complete it. This part is sold individually.
Installation Instructions
Gregory from Princeton Junction, NJ
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access. Read more...
Your Price
$6.02
  In Stock
Trim Ring - 6 Inch
★★★★★
★★★★★
(4)
PartSelect Number PS244475
Manufacturer Part Number WB31X5013
This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
Installation Instructions
Cynthia from Tampa, FL
Needed to replace Drip Pans and Trim Rings for old stove
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts.
Read more...
Your Price
$9.60
  In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(4)
PartSelect Number PS244680
Manufacturer Part Number WB32X10013
This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.
Installation Instructions
Cynthia from Tampa, FL
Needed to replace Drip Pans and Trim Rings for old stove
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts.
Read more...
Your Price
$13.54
  In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
PartSelect Number PS244696
Manufacturer Part Number WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside your range. This 8 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and reattach the element. Make sure the small hole on the bowl lines up with the element socket. Drip bowls are sold separately.
Fixes these symptoms
Installation Instructions
Gregory from Princeton Junction, NJ
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access. Read more...
Your Price
$13.96
  In Stock
Trim Ring - 8 Inch
★★★★★
★★★★★
(3)
PartSelect Number PS244479
Manufacturer Part Number WB31X5014
This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
Installation Instructions
Cynthia from Tampa, FL
Needed to replace Drip Pans and Trim Rings for old stove
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts.
Read more...

Related Parts