General Electric Range Handles

General Electric Appliance Parts
Shop By Part Type

Popular General Electric Range Handles

Your Price
$18.61
  In Stock
Door Handle End Cap
★★★★★
★★★★★
(30)
PartSelect Number PS256613
Manufacturer Part Number WB7X7183
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
Fixes these symptoms
Installation Instructions
Harry from Thomasville, GA
The end caps broke on my oven door handle.
1st I opened the oven door and removed the 2 screws that hold the outside and inside of the door together. With the door separated I removed the 2 screws that hold the end caps in place, then removed the old end caps. I put the new end caps on the oven door handle, aligned the holes for the end cap screws and reinstalled the screws,then reinstalled the oven door screws,closed the oven door and started cooking. Read more...
Your Price
$37.09
  In Stock
Oven Handle End Cap - Left or Right Side
★★★★★
★★★★★
(13)
PartSelect Number PS229187
Manufacturer Part Number WB07X10034
This oven handle end cap connects to your oven door handle, and acts as the joint that connects it to the oven door. This part is made of black plastic and can be used as the left or right-side end cap. If your oven door handle is loose or disconnected, this part may fix the problem. The end cap will need to be screwed into the oven door itself, but simply snaps in to the door handle. This part is sold individually.
Installation Instructions
Mary from Hackettstown, NJ
Plastic end brackets for the oven door handle were both broken
We had to buy star shaped screw driver bits to get the screws out. After that it was easy, unscrewed 2 screws, removed the old end pieces, and replaced with new end pieces and new screws. We used the original spacers and nuts. Repair was quick and easy. We found these same parts on the Sears website for $33 each. Here they were only $14 each. Read more...
Your Price
$34.51
  In Stock
Door Handle End Cap
★★★★★
★★★★★
(5)
PartSelect Number PS228368
Manufacturer Part Number WB07K10043
This white end cap is sold individually. One cap is required for each end of the oven door handle.
Installation Instructions
Scott from Columbia, MD
Oven Door Bracket Broke
After several temporary fixes, one of the end caps finally broke completely, so the handle fell off. Ordered both caps, they arrived remarkably fast, and were installed easily. Read more...
Your Price
$16.88
  In Stock
Door Handle End Cap
★★★★★
★★★★★
(5)
PartSelect Number PS256619
Manufacturer Part Number WB7X7189
This end cap can be used for either the left or right side.
Installation Instructions
Grace from San Francisco, CA
Updating Old Stove
I've just completed a remodel and while I like the existing stove from a functional perspective it was the only really shabby looking thing in my new kitchen. I didn't have the funds for a new oven and since the old was still worked really well I was looking for a way to give it a face lift. I noticed that the worst part of the look of it was the cracked and discolored plastic end caps on the back display and on the oven handle. Ordering new parts was EXTREMELY easy. In fact I am still in shock at how easy ordering the correct parts was. The partselect website is REALLY well designed. The new parts did the trick. I scrubbed the stove surface down, replaced the cracked and discolored end parts and I literally have now had 3 people ask me if I got a new stove. Read more...
Your Price
$38.31
  In Stock
Door Handle
★★★★★
★★★★★
(4)
PartSelect Number PS231857
Manufacturer Part Number WB15K5076
This is the replacement door handle for your range. It is made of black plastic and measures approximately 22 inches by 1 inch. The door handle connects to the range door and allows you to open and close the door. The main reason to replace the door handle is if it is broken or missing. Depending on your model you may need to remove the inside panel of your oven door to attach the handle. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Installation Instructions
nancy from rochester, NY
handle on range was broken
1] removed door and put it on bench
2] removed two[2] screws to open up face of door
3] wedged aa 2" x 4" between face of door and back of door
4] used nut-driver to remove the damaged end-cap [this part holds the stove handle in place]
5] put handle on one side to good end-cap and slipped new end-cap on handle and put it opening where old end-cap came off
6]screwed in new part and screwed together face and back of oven door
7] put door back on oven
Read more...
Your Price
$44.64
  In Stock
LATCH AND HANDLE Assembly
★★★★★
★★★★★
(5)
PartSelect Number PS8259925
Manufacturer Part Number WB14T10092
Installation Instructions
Reginald from Bessemer, AL
Latch would remain in the locked position once the oven finished self cleaning.
Found instructions on you tube. Easy as I,2, 3. Total of eight screws to remove, then unplug and replace the handle. First kill the power to your range before starting the repair. Read more...
Your Price
$59.47
  In Stock
Door Handle
★★★★★
★★★★★
(8)
PartSelect Number PS232127
Manufacturer Part Number WB15X10048
Handle only. Screws not included.
Installation Instructions
John from BOCA RATON, FL
replaced broken oven door handle
On a 18 year old electric GE range: amazing not the exact handle but it does fit perfectly and looks great. If your somewhat handy this is very easy and can be completed in less than a half hour. Save the screws from the old handle, they can be used again. Read more...
Your Price
$39.63
  In Stock
HANDLE BK
★★★★★
★★★★★
(3)
PartSelect Number PS2369983
Manufacturer Part Number WB15K10103
Your Price
$73.30
  In Stock
Door Handle
★★★★★
★★★★★
(2)
PartSelect Number PS232126
Manufacturer Part Number WB15X10047
This is a replacement door handle for your oven. It is made of black plastic and is approximately 30 inches long and 1.5 inches wide. The oven door handle attaches to the door and allows you to open the door easily. The main reason to replace the oven handle would be if the handle is broken or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
william from new orleans, LA
the oven handle broke during delivery
I remove the damage handle from the oven door,Then i install the new door handle with no problem.The tools i used was a hand nut driver and a phillip #3driver. Read more...
Your Price
$39.23
  In Stock
Door Handle
PartSelect Number PS232098
Manufacturer Part Number WB15X10018
This is just the handle. The end caps for this handle must be ordered separately if needed.
Installation Instructions
Thomas from COXS CREEK, KY
replaced door handle and end caps
the first end cap broke when I tried to tighten the screws, the end cap holes were too small, Thirty some dollars down the drain. Drilled out the second end cap before I tighten the screws, worked fine. Make sure you drill out the holes of the end caps or they will split out and you lose your money. There are no warnings about this problem. Read more...

Related Parts