Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 26, 2019
Does this part come with the required hardware to replace the old handle?
For model number Jbp78wy1
Hello John, Thank you for the question. This is just the end cap, hardware sold sepratley. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Julie
November 24, 2021
Is this the correct part for this model, the part is listed under the model, but the model isn't listed under the part. What are the dimensions?
For model number JGBP30WEA1WW
Hello Julie, Thank you for your inquiry. We have researched your model and confirm that this is the correct door handle end caps. It is held up against a 1 inch grid of squares to show the size, but the measurements are approximately 5 inches long, by an 1 and 1/2 wide. We hope this helps.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 8 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven Door Bracket Broke
After several temporary fixes, one of the end caps finally broke completely, so the handle fell off. Ordered both caps, they arrived remarkably fast, and were installed easily.
Scott from Columbia, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
13 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven door would not open
the difficult part of the job was getting the door open.once the door was opened , replaceing the defective hinge was not that hard.i received the replacement hinge in one day which was great.
We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.
Danette from Heber City, UT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
4 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Door Handle Broke
I removed the 3 screws from the Door Handle End Cap that was broken and replaced it with the (easily ordered and quickly delivered) New End Cap. The job was quick easy and we barely remember the door handle at all.
Timothy from Waterford, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both end caps were broken removed
Removed torx head screws. Removed broken pieces of the end caps. Replaced the handle installed the end cap screws.
Johnson from LUFKIN, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced door handle and end caps
the first end cap broke when I tried to tighten the screws, the end cap holes were too small, Thirty some dollars down the drain. Drilled out the second end cap before I tighten the screws, worked fine. Make sure you drill out the holes of the end caps or they will split out and you lose your money. There are no warnings about this problem.
The end cap door handles on our range were broken.
The parts were shipped quickly and were what I ordered. The one suggestion I would make to the installer would be to drill out the insert holes a bit in the plastic columns in the inside of the bracket. There are two such columns and they are used to provide further strength to the end cap. However, the diameter of the screw is too large for the insert hole because as I installed the first bracket one of these columns broke. After drilling out the insert hole, the screws were still snug and the end cap (and door handle) was quite solid.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joyce K - November 12, 2019
Verified Purchase
Perfect!
The only problem is, the new part is so much whiter than the rest of the appliamce!
★★★★★
★★★★★
Emily S - March 5, 2019
Verified Purchase
Identical replacement part
Arrived fast...and installation was a breeze.... wish I had done it sooner!
★★★★★
★★★★★
Stephen B - January 11, 2019
Verified Purchase
Part worked as expected.
What I ordered arrived on time and was in great condition. The part works as advertised.
★★★★★
★★★★★
Paul E - January 1, 2019
Verified Purchase
Correct Part, got it in 2 days!
Part was a direct replacement and fit perfectly.
Ordering was easy and the part arrived in 2 days.
You need common hand tools and some mechanical ability to replace these.
Also, do not over tighten as these are plastic.
★★★★★
★★★★★
Amanda L - June 12, 2018
Verified Purchase
Nice but Fragile!
The part looked nice and it was the appropriate one; however, I broke it while trying to tighten it into place. I don’t really see any realistic way of making this part stronger to fix this issue. Maybe, although I’m sure it won’t happen, if there was a warning against over tightening, others won’t make the same mistake as I did.
This oven handle end cap connects to your oven door handle, and acts as the joint that connects it to the oven door. This part is made of black plastic and can be used as the left or right-side end cap. If your oven door...
