General Electric Range Springs and Shock Absorbers
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular General Electric Range Springs and Shock Absorbers
Spring - Button
PartSelect Number PS230712
Manufacturer Part Number WB09X10009
Oven Door Spring
PartSelect Number PS257058
Manufacturer Part Number WB9X244This door spring is sold individually. It is recommended if you are replacing one, to replace both.
MARK from BLOOMINGTON, IN
Replacing oven door springs on older Kenmore range (40 years old)Not sure how common broken springs on Kenmore ranges or any other brand are, but both springs broke on my Kenmore oven door. When both springs break the door free falls to the open position which is dangerous. Replacement part number was unavailable so I found a spring the same length and diameter on the site. I then called Parts online and asked if they thought the replacement spring would work. They were quite helpful and said they said it should work. Upon arrive of the springs I pulled the bottom drawer under the oven totally out to gain access to the broken springs. The top of the spring connects to the door hinge and the bottom connects to the oven frame. Replaced bottom drawer. Total job took about 15 minutes. Read more...
Broiler Drawer Spring - Left Side
PartSelect Number PS257000
Manufacturer Part Number WB9K3
Broil Drawer Spring - Right Side
PartSelect Number PS256999
Manufacturer Part Number WB9K2
PartSelect Number PS1015625
Manufacturer Part Number WB09T10010